Used Hermle Uwf 1202 H for sale (108)

Year of construction: 1997, condition: used, x-travel 600 mm Ibodpfxjlp U Ako Aiysb y-travel 400 mm z-travel 420 mm Control Heidenhain TNC 407 quill stroke 75 mm table surface area 900x458 mm Tool bore SK 40 DIN 2080 oder DIN 6 turning speed range - stepless 20-4500 U/min transmission ratio 3 feed stepless 1-5000 mm/min rapid motion -longitudinal/cross/vertical 7-7-6 m/min total power requirement 13 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4x3,8x2,0 m

Condition: excellent (used), Year of construction: 2017, operating hours: 19,907 h, functionality: fully functional, machine/vehicle number: 25221, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC640, table load: 1,400 kg, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 4,408 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 42, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2017, Heidenhain TNC640 - Machine run time: 19,907 hours, Spindle run time: 4,408 hours - HSK-A 63, 18,000 min-1 - SRT800 torque drive in the C-axis - Tandem drive in the A-axis - 42 tool positions - Internal cooling system (IKZ) 80 bar, Varioventil adjustable from 0-80 bar - Compressed air at spindle center - External blow-off system - Air curtain for scale protection - Chip flushing gun - Automatic cabin roof - Electronic handwheel - Heidenhain measuring probe - Signal light - BLUM tool breakage/measurement system - Dynamic Efficiency - Dynamic Precision - Hermle WDS - Kinematic-Opt - Adjustable control panel - HIMS - Event messenger In very good condition - low spindle hours. The machine has previously been connected to a central coolant system. The machine will be delivered with a new tank and band filter, as well as a pump that supplies the IKZ and external cooling system (AKZ) pump. Functionally very similar to the standard Hermle configuration. We guarantee flawless operation and will gladly commission the machine at your location. Isdpez A Tzhjfx Aiyjbb

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 table size: 900 x 465 mm Ibedpfx Aehd Rm Usiyeb travel: X-600 mm, Y-400 mm, Z-420 mm tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Ibsdpfeygx Hnsx Aiyjb Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hermle U1130 5-Axis Very good condition! Available immediately! Operating hours: 35,500 h spindle hours total: only 11,000 h Maintenance measures in 2018: machine rebuild, drive, spindle: for €30,000 Travel: X-1130 mm, Y-720 mm, Z-630 mm table size: 1300 x 720 mm max. table load: 700 kg NC rotary table: 800 mm diameter, 20 rpm B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Ibedpfozych Usx Aiyob Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Ibedpfxozyq Ebe Aiyob Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Isdpfx Aexwcu Ajiyobb

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Isdpfjxaam Ujx Aiysbb Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 350 mm, overall weight: 2,300 kg, input voltage: 380 V, Equipment: documentation/manual, We can offer you, without obligation, ex warehouse, subject to errors and prior sale: H E R M L E CNC-controlled universal tool milling machine with 4th axis Type UWF 600 CNC (HDH TNC 425) Year of construction 1995, new LCD monitor, 1 year old Table travels: longitudinal X 400 mm Vertical Z 350 mm Milling slide travel, transverse Y 330 mm Table size 630 x 335 mm Spindle mounting SK 40 Spindle speeds in 3 stages, vertical/horizontal 40 – 6,000 rpm Arbor stroke, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Iodpfx Aoztl H Toiyobb Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special equipment Automatic tool changer • HEIDENHAIN 4-axis control system Type TNC 425 with graphics and various subprograms, mobile electric handwheel Vise, 2 tons clamping force • Vertical head can be easily swiveled away for using the horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different collets, • Separate control cabinet, separate coolant system, • Central lubrication, ammeter, etc. Machine comes from a training workshop, from 1995 to 2014, has been in our possession since then and has been used very little. Table with tool spindles is included. Condition: good – ready for demonstration, monitor of the HDH control system has been replaced. Delivery: immediately, machine is already on a pallet, ready for transport, but can be demonstrated at any time. 12-ton forklift truck available.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,310 mm, total width: 2,504 mm, table width: 528 mm, table length: 900 mm, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 40, product length (max.): 2,310 mm, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Working hours (from display): • Control on: 68,311 h • Machine on: 65,234 h • Program run: 13,572 h • Spindle Speed Range: 20 - 7000 rpm (stepless) • Taper / Tool Holder: SK 40 (similar to DIN 2079 / DIN 69871 / DIN 69872-19) • Tool Clamping: Hydromechanical (Clamping Force: 10 kN) • Spindle Diameter Front Bearing: 55 mm (Horizontal/Vertical 80/55 mm) • Feed Rate (X, Y, Z): 1 - 2000 / 15000 mm/min • Feed Force (80% Duty Cycle): 8000 N • Rapid Traverse (X, Y, Z): 15 m/min • Table dimensions: 900 x 528 mm • Swivel Range Spindle Head: 0 - 90° • Quill Stroke (Manual): 75 mm (Quill Diameter: 100 mm) • T-Slots: 7 slots, Width 14 H7 mm, Pitch 63 mm Ibedpfjy H Irbex Aiyob • Tool Changer: Vertical Tool Changer HTC 16 (16 pockets) • Noise Level: 75 dB (A) • Total Floor Space Requirement: 5.00 m² • Floor Load: ca. 964 kg/m² Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic Ijdpfx Ajzw Rl Ajiyobb

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Isdpfx Aezwmx Ssiyebb Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: used, Year of construction: 1999, x-travel 630 (875) mm Ibsdpfx Aiszh N T Hjyeb y-travel 500 mm z-travel 500 mm Control Heidenhain TNC 430 turning speeds 20-7.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 15 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 400 kg spindle diameter in front bearing 55 mm swivellable 0-90 ° quill stroke 75 mm spindle hours 9.546 h total power requirement 12/7,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4 x 3,6 x 2,2 m HERMLE U 630T 3-axis machining centre, built in 1999 The X-axis, with a stroke of 630 mm, can be extended to 875 mm by swivelling the tool changer out of the way. Accessories: Tool holders, see pictures

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm Iedecxxntspfx Aiyobb spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model: FW 800 Ibodpfx Aiedgrwdjyeb Machine No.: 304 Year of Manufacture: 1969 Weight: approx. 1000 kg General / Technical Data: Well-maintained, used horizontal milling machine with hydraulic program control (cam control strip) for automatic production processes. Arbor: SK 30 Travel distances: X 400mm Y 370mm Z 165mm Spindle speeds: 18 speeds, mechanically switched in 2 motor stages 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm Feeds: in the X and Y axes, stepless hydraulic; in Z (horizontal milling spindle) manual Table dimensions (fixed table): 800mm x 220mm Power supply / spindle motor power: 380V 50 Hz / 1.5 kW Approx. machine footprint: 1900mm x 1100mm x 1700mm (l x w x h) Accessories / Special equipment: - Fixed milling table - Assorted tool holders - Chip tray - Coolant system - Machine documentation with programming instructions Remarks The machine is in very good condition for its age. The machine is designed primarily for production use in small and medium series. The machine has a simple, cam-switch-controlled hydraulic program control.

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min Ijdeflrg Tjpfx Aiyjbb electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Iodpfxozpfg Es Aiyobb Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks

Condition: ready for operation (used), Year of construction: 2000, operating hours: 85,542 h, travel distance X-axis: 600 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details. - Spindle Operating Hours: 31,764 h- Internal Coolant Supply (IKZ) Pressure: 20 bar- Tool Taper: SK40- Operating Voltage: 400 V / 3-phase- Frequency: 50 Hz- Control Voltage: 24 V- Nominal Current: 63 A- Total Connected Load: 42 kVA- The folding roof needs replacement. Additional Equipment included: Knoll internal cooling system, approx. 200–300 pieces of various shrink-fit chucks (long & short), mandrels, collets, drill chucks Ibodpozyr Rljfx Aiyeb Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, Isdpfozghngex Aiysbb spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Hermle 3-Axis Machining Center Type C 600 V Year 1998 CNC Heidenhain TNC Ijdpfx Aezxpp Aeiyjbb

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: HERMLE Model: C 800 V Machine Type: CNC Vertical Machining Center Year of Manufacture: 2002 Control System: Siemens SINUMERIK Configuration: 3-Axis Machining Center Location: France Condition: excellent, can be demonstrated while powered on Origin: technical university / training and research environment Technical Data: Travel Ranges: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle: Tool Interface: HSK-A 63 Max. Spindle Speed: 16,000 rpm Max. Spindle Power: 15 kW Max. Torque: 130 Nm Isdpfx Ajzd Sr Roiyobb Internal Cooling / Coolant Through Spindle: 40 bar Axes / Feed Rates: Max. Axis Speed: 35 m/min Acceleration: 5 m/s² Tool Changer: Tool Magazine: 30 positions Tool System: HSK-A 63 Equipment: Siemens SINUMERIK CNC control system HERMLE control panel 3-axis configuration Vertical milling spindle HSK-A63 spindle 16,000 rpm spindle speed Internal cooling / High-pressure cooling through the spindle, 40 bar 30-position tool magazine Enclosed work area Fixed machine table with T-slots Machine light Coolant system / Pump unit available External high-pressure pump visible Renishaw system / Measuring probe system visible Electronic hand-held device / Handwheel Control cabinet integrated Extraction / Exhaust connection visible Machine vise visible in photos, scope of delivery to be agreed Manuals / technical documentation available Description: For sale is a HERMLE C 800 V CNC vertical machining center, manufactured in 2002, with a Siemens SINUMERIK control system. The machine comes from a technical university or training and research environment in France. It is therefore not a conventional production machine from heavy series production, but a machine from a technically well-maintained environment. The HERMLE C 800 V is a very stable and high-quality 3-axis milling machine with a large working area, HSK-A63 spindle, 16,000 rpm, 30-position tool magazine, and internal cooling / high-pressure cooling through the spindle at 40 bar. The following combination is particularly noteworthy: * HERMLE machine construction quality * Siemens SINUMERIK control system * HSK-A63 tool interface * 16,000 rpm spindle * Internal cooling / High-pressure cooling 40 bar * 30-position tool magazine * Renishaw measuring system visible * Origin from a technical university environment The machine is very well suited for toolmaking, mold making, prototype construction, training, research, single-part production, and precise general CNC milling operations. The machine is currently set up and can be inspected or demonstrated while powered on, by arrangement. Note on peripherals: According to the current photographic documentation, a coolant / pump unit and an external high-pressure pump are available. A large separate KNOLL chip conveyor, KNOLL paper band filter, or a large central KSS filter system is not available. The exact scope of delivery of peripherals, accessories, clamping devices, tool holders, measuring probes, and documentation will be finalized before the sale. Sold as a used machine, as is, without warranty. Technical specifications are subject to change without notice. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,295 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. Ijdozbu I Dspfx Aiyebb • Machine Type: Universal Milling Machine • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: good (used), Year of construction: 2000, functionality: fully functional, Hermle U 630 S, Iedpfezpwnnex Aiysbb Year of manufacture: 2000, Control system: Heidenhain TNC 430, Travel range X/Y/Z: 630/530/500 mm, Spindle speed up to 7,000 rpm, Max. table load: 800 kg, Electric handwheel, 3D measuring probe.

Condition: excellent (used), Year of construction: 2013, Travel: X-800 mm, Y-600 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 15.000 U/min tool magazine: 30 seats Ibodoyxh Hpjpfx Aiyjb probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: .

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Ibjdpfxjzv Syfs Aiyob Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.