Used Hexagon Metrology for sale (283)

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm Csdpfx Aswbvhasddehf --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Csdjxaigwjpfx Addshf

Condition: as good as new (ex-display), Year of construction: 2022, tube diameter 2" x 3.91 mm GAS tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU bar material - diameter 35.0 mm revolutions per minute 2.0 U/min radius min. 2 x D mm bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 400 V total power requirement 1.5 kW weight 141 kg range L-W-H 470 x 1050 x 640 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Current new price approx. €9.000 Special price upon request Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis Chjdjxaa N Aepfx Addsf BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 Csdpeuyiu Nsfx Addjhf On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.

Condition: used, mileage: 23,233 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Chassis front design: Floor plate Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Chodpfx Adsxitmgedjf Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. Chsdpfxotvz Rfe Addef During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or Codpoft Ti Tsfx Addehf *

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: Codpfju Impyox Addshf - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: used, Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl Chedpfoxab Hvsx Addof tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: good (used), functionality: fully functional, Tested used 3D coordinate measuring machine Mitutoyo Euro C Apex 9166 - precision and durability We offer a used Mitutoyo Euro C Apex 9166 3D coordinate measuring machine on our marketplace, which was developed for large and complex workpieces. Despite its older age, this machine has been extensively tested and calibrated by our technicians to ensure that it continues to deliver accurate and reliable measurements. The Euro C Apex 9166 offers a generous measuring range and robust construction, ideal for companies looking for a tried and tested solution. Technical data: Measuring range: X = 900 mm, Y = 1600 mm, Z = 600 mm Accuracy: ±2.9 + 0.4 L/100 µm Drive: CNC-controlled, for fully automatic measuring processes Touch probe: Renishaw TP200 with automatic probe change Software: Mitutoyo MCOSMOS Advantages: Tested and reliable performance: This used Mitutoyo Euro C Apex 9166 has been fully tested and calibrated by our experts. Despite the older year of manufacture, the machine guarantees precise and repeatable measurement results. Large measuring range: With a measuring range of 900 mm x 1600 mm x 600 mm, this machine is ideal for inspecting large workpieces. Robust construction: The granite construction of the base ensures stability and enables precise measurements even during intensive use. Chjdpfx Aouyiv Teddef Efficient automation: The CNC control and Renishaw TP200 touch probe enable fully automated and repeatable inspection, increasing production efficiency. Cost-effective investment: This machine offers an economical solution for companies looking for a proven and reliable 3D coordinate measuring machine. This used Mitutoyo Euro C Apex 9166 is ideal for companies that need a reliable and powerful 3D coordinate measuring machine for large workpieces. Despite its age, it remains a first-class choice for precise and automated measurements as it has been thoroughly tested by our metrology specialists

Year of construction: 1996, condition: excellent (used), The line is an original American-made line for upgrading sections of rollers for drawing profiles. The American-made line has a plate and a huge number of additional rollers for pulling pipes! - Year - 1996 Csdpfx Ash Ni Dusddjhf - Line use pulsed TIG welding for argon blowing and it can be upgraded by laser and resistance. - Electric consumers 30 kW. - Profiles - stainless steel profiles ellipse, D profiles, hexagonal, square and rectangular pipes. - In profiles of all dimensions from sheet metal width 125 mm and thickness 1 to 2.5 mm. - Speed - 30-90 m/h - Cutting unit - cross section by hand or with a band saw. - Line length 12 to 15 meters.

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 Suitable for large cutting lengths, e.g., in kitchen construction or for floorboards Compact footprint and highly versatile applications Quick conversion between double mitre cuts and cross-cutting Robust cast iron pivoting arm with replaceable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit swivels 45 degrees to both sides Motor equipped with mechanical brake Aluminium stop as standard Roller conveyors, one meter long each, available as optional accessories for both sides Technical Data Dimensions and Weight: Length approx. 2110 mm Width/Depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Extraction port connection: Saw blade guard extraction port Ø 60 mm Electrical Data: Rated voltage 400 V, frequency 50 Hz Motor drive power 4 kW Sliding Table and Work Table: Table length 2060 mm Codpfx Adsw I Uq Sedshf Table width 1320 mm Noise Emission: Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular Saw Unit: Saw blade tilt -45° to 45° Pivot angle of saw arm -45° to 45° Max. cutting height 45°: 570 x 120 mm Max. cutting height -45°: 470 x 120 mm Max. cross section: 900 x 20 / 855 x 80 mm Max. cutting height 0°/45°: 120 / 83 mm Saw blade diameter: 400 mm Saw blade bore diameter: 30 mm Saw blade speed: 2800 rpm Location: Solingen Availability: Upon agreement

Condition: used, Year of construction: 2025, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: Chodswml Duspfx Addsf - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, table length 1200 mm table width 700 mm table height 900 mm table load capacity 250 Kg weight of the machine ca. 36 Kg dimensions 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles Chodpfjvxw Hysx Addef - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514

Condition: used, Year of construction: 2025, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Chedpfx Adjxabu Hsdsf Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology Cjdpjwb Hygefx Addehf - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: new, The AMIS twin-shaft shredder has a CNC-machined, solid grinding chamber, which is completely bolted for easy maintenance. The machine housing and bearings are protected by wear rings and plates. The gear motors drive the two hexagonal working shafts, which can be equipped with different, exchangeable cutting discs. The two work shafts are supported in large-diameter SKF spherical roller bearings with lifetime lubrication. An automatic, battery-operated permanent lubrication system for the main bearings can be installed as an option. Special features Disassembly of the machine housing is not required to change the wear plates and wipers. Thanks to the horizontally split bearing plates, the rotors including bearings can be installed/removed from above in a very short time. A rotor change with other cutting tools can thus be carried out easily and quickly. The grinding chamber size can be changed with relatively little effort due to the bolted housing design. The motor equipment, gearbox size, installation position and rotor speed can be adapted accordingly. Basic technical data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scraper: 2 Chjdpjghgprefx Addef Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2800 kg Electrical control The machine is operated by a modern Siemens S 7/1200 control system with advanced 7-inch touch screen display. Both gear motors are controlled load-dependently with a reversing circuit. Three different control programs are available depending on the material and application. Options The machine can be customized for a wide range of applications. Various options are available: adapted base frames special hopper Grinding unit with different tools / cutting discs (diameter, size, thickness, shape, material grade) different drive powers different gearbox sizes with modified speed

Condition: ready for operation (used), Year of construction: 2016, measuring range X-axis: 650 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 3,000 kg, path measurement accuracy: 2 mm, total height: 2,918 mm, type of input current: AC, total width: 1,402 mm, total length: 1,920 mm, Manufacturer Name Brown & Sharpe Chodpoxvp Ruofx Addsf Model Xcel 7-107 Year 2016 Serial Number UA1091114 CE Marked YES Controller Hexagon operator controller Software Included Certificate of calibration January 2021 Location NC, USA Level of Removal Uncrated / Loose Recommended Packaging Form Custom pallet Overall Dimensions (W x L x H) 1320.80 x 1905.00 x 3302.00 mm (52 x 75 x 130 IN) Overall Weight 2268.00 kg (5000 LBS)

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Motor Power 2 × 15 kW (Total 30 kW) Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Knife Diameter 260 mm Knife Thickness 15.5 mm Cjdjxlcvcjpfx Addehf Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration ♻️ Suitable For Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4" inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8" inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2" inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth sockets M8,M10,M12 Five Star Nuts TS10,TS15,TS20,TS25,TS27,TS30,TS40,TS45,TS50 - Accessory 3/8" inch ratchet: Attachment for bits Torx nuts without bore T40,T45,T50,T55,T60,T70 Torx nuts with bore TT40, TT45, TT50, TT55, TT60, TT70 Imbus Nuts – H7,H8,H10,H12,H14 Slotted nuts SL8,SL10,SL12 Cross nuts PZ3,PZ4, PH4,PH8 - Accessory 1/2" inch ratchet: Snack H14,H17,H19,H22,H24 Snack H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 short essay, long essay, medium essay, Torx T30,T45,T50, allen key H7 + Drawer 3: - open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring wrench set 8 pieces 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision engineering screwdriver Slot: SL3.0 x 100mm, Cross : PH0 x 100mm - Screwdriver with soft grip and external hexagon: Slot: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8x150mm Cross : PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7x80 ; T8x80 ; T9 x 80 ; T10x80 ; T15x100 ; T20x100 ; T25x100; T27x100 T30x100 ; T40x150. + Drawer 5: - T-handle imbus / hexagon set with ball head: 3 x 115mm; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + drawer 6 - Circlip pliers set inside/outside 4 pieces, 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle nose pliers, Cedpou Img Sjfx Addehf curved needle nose pliers, pipe wrench. - Claw hammer, grain 3mm,4mm,5mm,6mm,7mm,8mm.

Condition: excellent (used), Year of construction: 2019, Hainbuch centroteX quick-change system (2019 model) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Drawbar connection: M85x2 o Length: 53mm o Opening: 78mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o ID no.: 10000678 o Length: 136mm • 1x TOPlus mini Axle pull size 65 (A038530.008C) o ID no.: 10000676 o Length: 134.5mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179mm o Diameter: 210mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155mm o Diameter: 257mm • 1x monteq change system (A012708.0009B) • 1x D400 mobile container o Storage of the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side Csdpfev Ivaksx Addohf • Descriptions/Instructions • 1x Tool box with accessories Accessories • TOP65 clamping head (coarse for raw material) o 1 each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o each 1 pc.  d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs.  d38 • 1x boring ring for clamping head 65 • 50 clamping heads in total • Jaw accessories o for HWR 4-jaw chuck  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck  1 set of hard Reversible jaws o Various T-nuts + screws o Various spacer bolts for jaws (adjust the clamping length to the material) • Various soft jaws (2 pallets)

Condition: new, Year of construction: 2025, Precision vices feature high clamping rigidity and long-term reliability. Vices from this series allow for changing the position of jaw inserts, making it possible to increase the area of clamping. Features and applications Base made of durable cast iron Chodpsvxg Elsfx Addsf Possibility of changing jaw inserts for increased work area Movable jaw design provides additional clamping of the workpiece to the base Repositionable jaw inserts, can be placed on both sides of the jaws Possibility of using a number of vices at once Used with milling machines, boring machines, CNC machines Technical data Jaw height 100 mm Jaw width 32 mm Maximum L1 jaw opening 100 mm Maximum L2 jaw opening 150 mm Maximum L3 jaw opening 215 mm Maximum L4 jaw opening 265 mm Transverse bar width 14 mm Longitudinal bar width 14 mm Hexagonal head of the drive shaft 14 mm Dimensions 305×100×86 mm

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Codpfx Adjv Raatsdohf Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: new, mileage: 10 km, power: 355 kW (482.67 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, Equipment: soot filter, Vehicle number: 530003 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Left-hand drive * LED interior lighting * Black seat belts LIGHT & VISIBILITY * Side marker lights OTHER EQUIPMENT * ZF Intarder Other features -----Color/paintwork----- Driver's cab color E1980 Crystal White * Lower driver's cab step Stone Grey * Black sp. housing for driver's cab. Crystal White * Chassis color anthracite gray * Headlight surround color: Crystal White * Bumper color: Gray * Handle & surround: Black, sidewalls: Cab color -----Tires/wheels----- Goodyear * Front axle(s): 315/80 R22.5 * Driven rear axle(s): 315/80 R22.5 * Steel disc wheels, silver gray * Wheel trim rings, silver gray -----Equipment/special equipment----- Day Cab * Chassis design, front: robust * Mechanical cab suspension * Without external sun visor * Flexible cab step * Horns, prepared * LED headlights and fog lights * Headlights without height adjustment * Headlight beam for right-hand traffic * Two LED headlights for cab rear wall * Windshield with sun protection film * Rear window: double glazed * Tempered glass * Main mirror * DAF Corner View * Central locking, 3 keys, 2 remote controls * Steering wheel, leather * Interior trim color: Luxury * Dashboard design: Vision * Driver's cab, interior trim: Hexagon * Door trim: Loosely woven fabric * Driver's cab wall paneling textile * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Driver's seat, fixed base * Passenger seat: Cinema with fabric cover * Passenger seat, fixed base * Dashboard table * Middle storage compartment * Cool box or refrigerator * Curtains, without partition curtain * Automatic temperature control and air conditioning * Auxiliary heating with waste heat pump and timer * Roller blind driver's side * Roof hatch with electric operation * Accessory power supply: Standard * FMS connector, extended and prepared Cjdpfx Adeupq Dcodehf * DAF Connect * Preparation for toll * Digital tachograph, VDO 1C, version G2V1 * Speed limit setting 90 km/h * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB-prepared Rad., 2x Mobf. GNSS extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Wireless charger * Electronic Stability Control (VSC) * Reverse alarm system * Basic immobilizer * Front: 8.00 t, parabolic, 167N * Front axle 1, 8,000 kg, load index 156 * Rear suspension 21.0 t/brakes 21.0 t * Rear axle load capacity 10.50 t + 10.50 t * Rear: 21.00 t, trapezoid, HR1670T * Rear axle 1, 12600 kg, load index 148 * Front leaf spring suspension, extra high * MX-13 engine, 355kW/483PS Cab emblem: 480 * Emissions class Euro 6 * ECO performance * Automatic idle shutdown, 5 minutes * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Maneuvering mode * Automatic transmission with manual gearshift, full version * Off-road use with rocking function * Rear axle ratio 3.76 * Mechanical differential lock * Electro-pneumatic control for parking brake * Spring brake cylinder first front axle * Spring brake cylinder on tandem rear axles 1 and 2 * Parking brake assistant * 2-cylinder compressor without clutch * Drive rear axle with drum brakes * Wheelbase 4.05 m/rear overhang 1.50 m tipper * Longitudinal member 310

Condition: new, Year of construction: 2025, Vice used with grinding, milling and boring machines, as well as EDM machines, CNC machines and machining centres. Features and applications Base made of durable cast iron, approx. HRC 40, fixed and movable steel jaws about HRC 48–52 Possibility of repositioning jaw inserts for increased work area Movable jaw design provides additional clamping of the workpiece to the base ±0.015 mm allowed base height deviation Possibility of using a number of vices at once Used with milling machines, boring machines, CNC machines QM16125N Technical data Jaw height 125 mm Jaw width 38 mm Maximum L1 jaw opening 112 mm Maximum L2 jaw opening 165 mm Maximum L3 jaw opening 250 mm Maximum L4 jaw opening 305 mm Transverse bar width 14 mm Longitudinal bar width 14 mm Hexagonal head of the drive shaft Chjdpfx Asvxgugjddef 14 mm Dimensions 338×126×106 mm Weight 16 kg