Used Indexers for sale (1,271)

Condition: used, Year of construction: 2017, Rotary Table, Indexing Table Manufacturer: Expert Tünkers Model: EDX810/0250/8 Blsdpfxoyl Swwo Agksd Year of manufacture: 2017 8-station table (45° indexing steps) 24226

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg Blodpsymga Nofx Agkod

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production. Bedpfx Aegd D U Ejgksld

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Bjdpsr I E Itofx Agkjld Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Blsdpfx Aeu Tln Nogkjd Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main and counter spindle • Thread cutting without compensating chuck Bsdpfxsylw Dco Agkold • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,15,000 h, travel distance Y-axis: 120 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2006. It features a Y-axis travel of 120 mm, a turret with 12 stations, and driven tools on both turrets. The machine is equipped with a Siemens 840D control system and includes a collision monitoring system. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. Bjdpfx Aoylwuhsgksld • C-axis on main spindle and sub spindle • Electronic gearbox • Additional V24 RS232 interface in electrical cabinet • Transmit / Tracyl function • MDE interface (machine on, machine running, part counter) • Collision monitoring system Marposs (Brankamp) CMS100 • 3D machine model for kinematic simulation in CAM system • Electrical cabinet cooling unit (2 units) • Main spindle D65 with HAINBUCH pull-type collet clamping • Sub spindle D60 with HAINBUCH pull-type collet clamping • Stop device • Coolant flushing of sub spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Automatic sliding door (hydraulically actuated) • ROTOCLEAR viewing window • Coolant pump 80 liters / 8 bar • High-pressure pump 80 bar • High-pressure coolant connection for slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • UNIMAG interface • Operating hours: approx. 115,000 h Additional equipment • Portal unloading unit with actuated NC-controlled gripper • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (for emulsion use) • Multi-channel bar loader: Breuning / IRCO PROFImat 65.8 PR*270/8 • Year of manufacture: 2006 • Bar capacity: up to 3 m length • Maximum bar diameter: D65

Condition: used, Year of construction: 2022, INDEX - C200 - 2022 Bodjyl Nnaopfx Agkeld - less used condition as shown on photos - under power, can be tested

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,300 rpm, number of axes: 12, This 12s Index MS32C multi-spindle turning machine was manufactured in 2006. It features a maximum bar diameter of 32 mm and a maximum spindle speed of 6,300 rpm. The machine is equipped with a Siemens 840D CNC control and includes a bar loader, coolant tank, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the Index MS32C machine we have for sale. Contact us for further details. • Number of spindles: 6 • Max. bar diameter: 32 mm • Slide units 1.1–6.2: CNC-controlled X and Z axes • Synchronous unit at spindle position 6.1 • Counter spindle • CNC control: Siemens 840D with control panel and 2× NCU Additional equipment • Bar loader: IEMCA SIR MS32 F • Coolant tank: KNOLL, with high-pressure pump • Chip conveyor: KNOLL • Cooling unit (chiller): Riedel WTS 030.02-NE • Unloading system with 2 CNC axes • Fire extinguishing system: KRAFT UND BAUER Bodpfx Aeylk R Ajgkold

Condition: used, functionality: unexamined, Ferwood Code: AGG0207 - Manufacturer Code: 6314H0080 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Please contact us. 4.5KG 20X20X20 Bsdpfjylal Nsx Agkeld

Condition: ready for operation (used), Year of construction: 2015, total width: 1,400 mm, total height: 1,800 mm, overall weight: 1,850 kg, spindle motor power: 7,500 W, product length (max.): 2,700 mm, spindle speed (max.): 6,000 rpm, Spindle moulder manufactured in 2015. This STETON INDEX machine features a programmable electronic control system with a 10.4” color touch screen, allowing for efficient management of machining parameters. It includes two profiling spindles with a vertical stroke of 265 mm and a maximum tool diameter of 240 mm, providing versatility in operations. Consider the opportunity to buy this STETON INDEX spindle moulder. Contact us for further details. Control system • Electronic control with programmable system • 10.4” color TFT touch screen • Control of vertical movement of 1st and 2nd profiling spindles • Program memory for machine parameters, tools, and machining programs • Frame or single element processing management • USB port (data input, backup, service) • Automatic star–delta motor start • Self-braking electric motors • Emergency stop and limit switchesProfiling spindle 1 • Usable length: 320 mm • Spindle diameter: 50 mm • Vertical stroke: 265 mm • Speed: 6000 rpm • Max. tool diameter: 240 mm • Pneumatic center guide • Motor power: 7.5 kW (15 A) Bsdpfx Agsykpw Eskjld • Extraction outlet diameter: 150 mm • Rotation: clockwise / counterclockwise (anti-tear function possible)Profiling spindle 2 • Usable length: 320 mm • Spindle diameter: 50 mm • Vertical stroke: 265 mm • Speed: 6000 rpm • Max. tool diameter: 240 mm • Pneumatic center guide • Motor power: 7.5 kW (15 A) • Extraction outlet diameter: 150 mm • Rotation: counterclockwiseGrooving spindle (3rd spindle) • Horizontal movement: pneumatic • Vertical stroke: 40 mm • Horizontal stroke: 150 mm • Spindle height: 80 mm • Spindle diameter: 30 mm • Speed: 6000 rpm • Max. tool diameter: 200 mm • Motor power: 3.0 kW • Rotation: counterclockwiseFeed unit • Feed speed: 3–15 m/min (variable) • 12 rubber-coated rollers • Roller diameter: 120 mm • Feed motor power: 0.75 kW • Pneumatic vertical adjustment of first two rollers (photo-cell controlled)

Condition: used, / weight 295 kg Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Bljdeykvbdspfx Agkjd Height: 280mm Weight: 110kg

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing Bedpfsxcbpijx Agksld - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank Bjdpfxjxf Uytj Agksld - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Bsdpoxf Uudsfx Agkeld Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch Blsdpfsdzp T Nex Agked - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 67,000 W, total height: 2,591 mm, total width: 2,199 mm, overall weight: 21,000 kg, product length (max.): 6,300 mm, tool weight: 5,000 g, swivel angle B-axis (max.): 360 °, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Main spindle 0102 direct driveMaximum material throughput: 102 mmMaximum speed: 3000 rpmFront bearing diameter: 170 mmVariable hollow shaft motorPower at main spindle D102:Power at 100/40% duty cycle: 53 kW/68 kWTorque: 675 Nm/900 NmWork spindle alignment and switching device D1022.5° increments via indexing discHydraulicly actuated hollow clamping cylinder D102 with analog clamping stroke monitoringMaterial clearance: 102 mmStroke: 48 mmMaximum clamping force (tension/compression): 10,900 dNMulti-clamping pressure deviceClamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. Chuck release movement required for transitioning to a lower clamping l carrier 1 (standard equipment)Cross slide X, Z, turning length 2000 h internal coolant supply and shut-off valve, ball screws D=40 mmin the X-axis, D=50 mm in the Z-axis. Axis drives protected by overload clutches, counterweight in the s X ZWorking travel mm: 320 2000Rapid traverse speed m/min: 20 40Feed force N: 14000 14000X-axis measuring system: Glass scale (absolute)Z-axis: ROQ encoder (absolute)X-Y-Z-B housing (WT1)Turret with AC motor, positioned by spur gears, hydraulically lockedY-axis quill, hydrostatically mounted, lockable via spur gearsBall screw, D=40 mmOverload clutchTravel: 220 mmRapid traverse speed: 12 m/minFeed force: 24,000 NROQ encoder (abs)B-axis drive with AC motorSwivel angle: 360°Tool drive unitwith two clutches:Maximum speed: 6,000 rpmPower (25%) at n= 6,000: 17 kWMaximum torque (25%): 37 NmDisc turret with 12 stations on cross slide 1Tool holder system DIN 69880-40x63Increased repeatability during tool changes due to additional W-slotsMultifunction unit on cross slide 1Maximum speed: 6,000/1,500 rpmGearbox: i=4Torque: 36/144 NmTools: SK50Front bearing diameter: 75 mmInternal coolant feedthrough, disc spring clampingTool carrier 2, right - X, ZTurning length 2000 mm, preferably oncounter spindle machine with internal coolant supply and shut-off valve, turret control via AG motor, ball screws D= 50 mm for Z-axis, D= 40 mm for X-axis. Axis drives protected by overload clutches, counterweight system in ret head oriented to the right towards the counter s X ZTravel mm 210 2000Rapid traverse speed m/min 20 40Feed force N 8600 14000X-axis measuring system: glass scale (abs)Z-axis: ROD encoder (abs)Disc turret with 10 on cross slide 2Tool holder system DIN 69880-40x63Increased repeatability during tool changes thanks to additional W-slotsPositioned by face gearing, hydraulically lockedCounter spindle D102, size 11-DIN 55026/55021 and ISO 702/1Turning length 2000 mmZ-axis slide driven by AC motor and 50 mm diameter ball screwAxis drive protected by overload clutchIn the working position, the slide is held against the stop by the AC motor. Bodpfx Aox D D Ecjgksld

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Bjdpfxsxllcls Agkjld

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request. Bledpe R Ecgofx Agksd

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Bledpfoyhq A Dsx Agkod Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,971 h, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control system: Siemens SINUMERIK 840C (INDEX OEM) • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic • Cooling system: Central coolant system Blodpfx Agoyhpguokjd • Lubrication system: Central automatic lubrication • Installed power: approx. 70–75 kW • Typical materials: Steel, stainless steel, aluminum, brass

Condition: used, machine/vehicle number: 4686, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bedpfx Agsh Ax D Ssksld Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 50279, Registerstanze - Index Cutter Hunkeler RE 320Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bjdpfx Ageh Axvgekeld

Condition: used, machine/vehicle number: 4852, Registereinschneidemaschine - Index Cutter Hunkeler RE 320Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PSAußenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Blsdpfx Ageh Ax Tlskod Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm Bedpfeyhcg Ujx Agkjld -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg