Used Hfs 6 for sale (50,082)

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Iiodpfxszwmy No Aiysg Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park Isdpszi Uq Hofx Aiyeig

Condition: used, Year of construction: 2003, Second-hand machine Iijdezk Nt Eopfx Aiysg Year of manufacture: 2003 Features and technical specifications: - MAGELIS control system - for EVA-based hot-melt adhesives - Jointing: 2 × 1.5 kW, u = 12,000, 200 Hz - Cross-cut saws: 2 x 0.2 kW, automatic tilt 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper blade - Surface scraper blade - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: at short notice Storage location: Baden-Württemberg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Textile screen printing machine with 10 stations and 6 printing units (Made in Germany), with only 454,220 prints, and 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and can be inspected in operation until the beginning of October. Iisdpfoztqy Ssx Aiyjg • 10 aluminum sandwich pallets 420 x 600 mm • 10 aluminum sandwich pallets 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A • Digital microprocessor control • Operation via touchscreen, text display optionally in various languages • Screen holder from the side • Pneumatic screen clamping • Double indexing and ½ indexing • Control panel on each printing arm • Registration accuracy 0.025 mm • Adjustable cycle speed • Gap setting Optionally, a Rutcure Master 18 drying tunnel can also be purchased, with a chamber length of 260 cm, belt width of 105 cm, and 18 kW, manufactured in 2007. Price: 2,300 euros (negotiable).

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Iodpfezx S E Tsx Aiyoig Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, total width: 2,600 mm, total length: 18,000 mm, total height: 3,620 mm, input voltage: 400 V, input frequency: 50 Hz, The ADL 2500/6 INOX is a fully automatic production line for the manufacture of insulated glass. The line consists of a stainless steel washing machine and a panel press and is designed for efficient, precise, and reliable processing of insulated glass. The washing section is entirely made of stainless steel and equipped with six individually controlled brushes, suitable for processing Low-E glass. Thanks to the automatic glass thickness detection and the servo-controlled panel press, a constant and high-quality result is guaranteed. Year of construction: 02/2024 Maximum glass size: 2,500 × 3,210 mm Minimum glass size: 240 × 400 mm Insulated glass thickness: 10 – 60 mm Washing machine glass thickness: 3 – 12 mm (without adjustment) Maximum glass weight: 400 kg Power supply: 3 × 400 V + N + PE, 50 Hz Installed power: 43.5 kW Air pressure: 6 bar Air consumption: 70 l/min Transport speed: 0 – 6 m/min Dimensions (L × W × H): 21,000 × 3,300 × 3,530 mm Machine weight: 7,580 kg Direction of operation: left to right Complete stainless steel washing section Enclosed washing unit with sound insulation Six individually controlled brushes for Low-E glass Automatic detection of glass thickness Electric panel press with servo-controlled pressure regulation Ijdpszzczdjfx Aiysig Touchscreen control (English or Italian) Industry 4.0 ready (OPC UA compatible) Output conveyor belts with dual speed for higher productivity Available from mid-September 2026. If interested, you can contact Carmen Ernest directly for a viewing or additional information. +31 6 14334647

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h Isdpfjzwmx Sjx Aiysig EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) Iedpew Ighisfx Aiyoig - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: excellent (used), mileage: 5,73,415 km, power: 206 kW (280.08 HP), first registration: 01/1979, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, Year of construction: 1979, Front axle: Steering Rear axle: Double wheels Iiodpfozhxmvsx Aiysg Number of cylinders: 6 Technical condition: very good Visual appearance: very good Registration number: 1BRK466 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Ijdpfxszzqabo Aiyeig Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: BO 15263, total width: 2,300 mm, total length: 2,300 mm, total height: 1,700 mm, travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, grinding diameter: 150 mm, grinding length: 500 mm, input frequency: 50 Hz, Equipment: documentation/manual, J&S 1096 grinder: issues with the CNC control system. Isdpfx Aijz Dgphjyjig

Condition: excellent (used), Year of construction: 2015, operating hours: 22,000 h, functionality: fully functional, overall weight: 98 kg, load capacity: 6 kg, arm reach: 800 mm, controller model: IRC5, Industrial robot ABB IRB140-6/0.8 The robot is fully functional. Year of manufacture: 2015. Iedpfxoxcxcgj Aiyeig Power supply: 3 x 400V. 22000 operating hours. For further information, please do not hesitate to contact us. Other robots available from stock: Fanuc M10iA R30iB Mate.

Condition: refurbished (used), Year of construction: 2016, operating hours: 20,169 h, functionality: fully functional, machine/vehicle number: 512822, overall weight: 51 kg, load capacity: 6 kg, arm reach: 706 mm, This is a KUKA KR 6 R700 WP industrial robot with a KRC4 controller, manufactured in 2016. This robot has been fully overhauled! The controller includes the following options: KUKA.CPC Iijdpfxszwfmzs Aiyog KUKA.Platform BoardPackage ExpertTech KUKA.PROFINET MS KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration

Condition: repair required (used), functionality: limited functionality, loading space volume: 30 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,000 mm, 30 cubic meter container for cable handling equipment 6 meters long with hinged doors at the rear Iiedpfx Aisz A Dy Ioyeg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,895 h, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Isdpfx Aezu Ix Uoiyeig Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Total weight: 4,000 kg Operating hours: 9,895 h

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2334, arm reach: 3,000 mm, load capacity: 165 kg, empty load weight: 2,500 kg, control type: CNC control, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! Iiodpfx Aozzbbpeiyeg TECHNICAL DETAILS Number of axes: 6 Reach: 3,000 mm Load capacity: 165 kg MACHINE DETAILS Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,400 x 2,500 mm Unladen weight: 2,500 kg Transport packages: 2 EQUIPMENT CE marking

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Iedpfxezz Iq Re Aiysig

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Technical data: Iiodpfx Aoz Aarcjiyeg - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, axle configuration: 3 axles, first registration: 06/1992, color: other, Year of construction: 1992, Carrying capacity: 35.000 kg Iiedpfx Aew I Euzjiyjg Axle 1: left 10-10 mm right 10-10 mm Axle 2: left 8-8 mm right 8-8 mm Axle 3: left 6 6 mm right 6 6 mm

Condition: used, functionality: fully functional, Year of construction: 1986, Hydraulic plate shear Manufacturer: LVD, Type: HSL 31-6 mm Year of manufacture: 1986 Technical data Ijdjz A S E Eepfx Aiyeig Manufacturer: LVD Type: HSL 31/6 Year of manufacture: 1986 Useful length: 3100 mm Sheet thickness: 6.00 mm Motor power: 7.5 kW Dimensions: L 4.0 x W 1.6 (plus angle stop) x H 1.85 m Weight: 4.2 t Equipment - Motorized back gauge, 750 mm - Angle stop, 1500 mm - Cutting edge lighting - Manual cutting angle adjustment - Manual cutting gap adjustment - Foot switch All information is subject to change without notice. A demonstration can be arranged in our showroom at any time.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: Isdezt H U Sjpfx Aiyjig MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Iijdpfx Aijyc S Htsyog Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: good (used), Year of construction: 1987, older but functional panel saw with a cutting length of 5.1 m max. cutting width: 0.4 m max. cutting height: 140 mm overall length: 6.35 m Iodszl Hddjpfx Aiysig overall width: 1.2 m

Year of construction: 2009, condition: used, Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible. Isdpjz Da Rrjfx Aiyeig

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Iijdszlutmspfx Aiyeg Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!