Used Hfs 6 for sale (50,211)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Make: BWF, type: SI 6/1 AS-N X710, serial no. 1114, control: Siemens, type 840 Dsl, machining diameter 40-400 mm, machining depth 710 mm, workpiece diameter 500-600 mm, max. workpiece length 1,000 mm, WSTK head swiveling -5/+30°, belt filter system, oil mist filter, make Unifil, retrofit 2011. Hedpeyfii Djfx Aftofl

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. Hfodpfez Ai Tpjx Aftol This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2013, Dry-type (cast-resin) distribution transformers – manufactured Siemens. 2 units: 2500 kVA, 6/0.5 kV, IP00, uk=6%, Dyn1, aluminum windings, LV outlet at the bottom (short side) 2 units: 100 kVA, 6/0.4 kV, IP00, uk=6%, Dyn1, aluminum windings, LV outlet at the bottom (short side) Hfjdpfx Ajz Akh Ieftel Documentation available; fully functional.

Condition: used, Year of construction: 1988, operating hours: 2,360 h, Equipment: soot filter, Ref. No.: B - 02 * O&K * RH 6 * Crawler chassis * with vibratory hammer * approx. 2360 operating hours * fully functional Hfsdpexvf S Iefx Aftel Trade-in possible Financing from 4.99% Subject to errors and prior sale! The information in this listing is non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment should be checked separately. All information in the listings is non-binding! Delivery available throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm, and by appointment!

Condition: used, total length: 6,000 mm, total height: 1,510 mm, total width: 1,450 mm, overall weight: 10,300 kg, Equipment: documentation/manual, FAMAR 3-ROLLER CALENDER CAPACITY: 8 x 4050 mm UPPER ROLLER DIAMETER: 300 mm LOWER ROLLER DIAMETER: 280 mm MAXIMUM CALENDRABLE THICKNESS: 8 mm VIDEO AVAILABLE Hjdpfxozzdl Ds Aftefl

Condition: good (used), functionality: fully functional, mileage: 3,31,000 km, power: 2,35,359.88 kW (3,20,000.00 HP), first registration: 06/2016, fuel type: diesel, maximum load weight: 8,100 kg, overall weight: 18,000 kg, tire size: 315//70R22.5, axle configuration: 6x4, wheelbase: 5,670 mm, next inspection (TÜV): 01/2026, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,260 mm, Year of construction: 2016, operation weight: 18,000 kg, Equipment: ABS, air conditioning, car registration, cooling unit, low noise, onboard computer, tail-lift, traction control, IVECO NEW EUROCARGO ML180E32P – CHASSIS ZCFA71TN702654777 Year 06/2016 - EURO 6 6-cylinder engine - Tector 7 with SCR - 6728 cc - 320 HP - Km 331,817 Automated \ sequential ZF 6-speed gearbox Body: white color IC194. Tyres: Size 315/70 R22.5 STRUCTURE: Wheelbase 5,670 mm - GVW 180 Q.li – P. Utile 81.10 Q.li - Short cabin ML MY2015 – Susp. pneumatic rear TRUCK EQUIPMENT: Tector 7 Engine With Scr - 6728 Cc - 6 Cylinders Common Rail – 250 HP Hfsdpfx Afovwiq Ijtel 6-Speed Gearbox, Air Conditioning, Euro 6, Pneumatic Rear Suspension, Abs, Cruise Control, Brake Engine With Retarder Function, Immobilizer, Power Steering, Short Cab Mlc-My 2015 Low Roof, Electric Windows, 280 Lt Fuel Tank, Led Drl Daytime Lights, Pneumatic Driver Seat, Electric And Heated Rear View Mirrors EQUIPMENT: ISOTHERMAL VAN - Brand: SCHUH – Internal useful dimensions approx. 7.76 * 2.50 h 2.25 02 rear doors, Internal dividing bulkhead REFRIGERATOR UNIT - Model: CARRIER 1150 – Matr. GC612068 – YEAR 2016 SWING TAIL LIFT Brand: DAUTEL - Matr. 462335-004 – Year 2016 - Lifting capacity 20 Q.li ATP FRC – EXP. 12/2030 Documents: Nationalized – Approval certificate

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Cutting lenght: 6200mm Hsdsxrg R Rjpfx Aftefl Blade 500mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Hfodjzzx H Aspfx Aftsl Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Documentation Note: The machine has been regularly maintained both electronically and mechanically. New ball bearings and linear guides were installed approximately 2 years ago.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,274 h, pressing force: 6 t, total height: 2,580 mm, controller manufacturer: DELEM, controller model: DA-66T, product length (max.): 2,100 mm, number of axes: 6, This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details. Hfsdpfx Ajz A Aa Tsftsl • CNC axes: Y1, Y2, X, R, Z1, Z2 • Bending unit: • Max. approach speed: 160 mm/s • CNC backgauge: • CNC-controlled axes: X, R, Z1, Z2 • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 250 mm • R-axis speed: 350 mm/s • Servo-motorized CNC backgauge • X-axis servo motor with ball-screw drive • Z1 and Z2 CNC-controlled backgauge fingers • Backgauge positioning accuracy: up to 0.05 mm • Safety: • Side safety guards • Safety system for bending area • Tooling style: Amada (Promecam) • Electrical: • Main motor power: 7.5 kW • Power supply: 400 V, 3-phase, 50 Hz • Nominal current: 18 A • Control voltage: 24 V Additional equipment • Segmented upper punch tooling • Multi-V lower die • Front sheet support table / support arms • Foot pedal control Technical Specification Bending Length 1270 mm

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom Hedpsyyqnljfx Aftefl ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. – Application: Old wood, household and commercial waste – Condition: New / very good condition Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. Hedjzphiispfx Aftjfl The price stated is net. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00689, load capacity: 205 kg, arm reach: 2,800 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6700-205/2.8 manufactured in 2015.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-205/2.8 Model Number: IRB Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 205 Reach (mm): 2800 Repeatability (mm): ±0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1270   Controller: IRC5 Year of Manufacture Cabinet: 2015.07 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15 Hfedpfx Aoz A D Edoftol

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m Hedpfez Akgwex Aftjfl - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: excellent (used), mileage: 4,70,368 km, power: 338 kW (459.55 HP), first registration: 09/2014, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: retarder, = Additional options and accessories = - Intarder = Remarks = WJMS2NTH60C273877 = More information = Technical condition: very good Visual appearance: very good Price: On request Registration number: 2BRY213 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Hjdpfxjymq Dro Aftefl Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Hodpfxow Edmfs Aftefl Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Inspection possible on-site. Price: €35,000,- EXW If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Hjdpfsywfbusx Aftofl Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: good (used), functionality: fully functional, operating hours: 4,300 h, empty load weight: 16,000 kg, Manufacturer: KALMAR Type: DCE100-6 Year: 2010 Hodpoz Aqkvofx Aftefl Capacity (t): 12 ton Own Weight: 16 ton Lifting height: 3 m Working Hours: 4,299 h Equipment: Full cabin with heater Fork tine extension: 2 m

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Hfsdpfxjywx Iue Aftjl

Condition: good (used), Year of construction: 2009, functionality: fully functional, 6 pockets Hsdjxbpv Ujpfx Aftsfl Control unit: Navigator-Control with touchscreen Folding units 1st unit Pockets: 6x Cross fold unit with 2 knives Second knife aligned to: left 1x side pocket Noise protection hood with Palamides Alpha 700, year of manufacture: 2007, stack delivery

Condition: used, mileage: 4,42,326 km, power: 115 kW (156.36 HP), first registration: 08/2016, fuel type: gas, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, immobilizer system, * 5,900 EUR net * Mercedes-Benz Sprinter 316 CNG L2H2, 9 seats, wheelchair lift, air conditioning, Euro 6 * Tribus conversion * Seats (8+1) * Automatic transmission * Radio/CD player * Driver's airbag * USB port * Electric windows * Electric mirrors * Central locking * Air conditioning * Air-suspended driver's seat * Tire pressure monitoring * Daytime running lights * ABS * ESP * 2 wheelchair spaces * Wheelchair lift, 400 kg capacity * Wheelbase 367 cm * Unladen weight 2791 kg * Payload 709 kg * Permissible total weight 3500 kg * Passenger car registration Hodszvlf Uopfx Aftsfl * Vehicle No. 6 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Phone: WhatsApp Email: Delivery and customs license plates (export number) available from us. Subject to errors, typos, and prior sale. Technical specifications and equipment features must be checked separately. The condition of the vehicle as per the contract is only the one that is inspected on site at the time of purchase and confirmed in writing. Please schedule an appointment...

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Hfodjxhntrspfx Aftsl

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Stroke: 500 mm Hodpfx Afsz Aqx Tjtjfl Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Hjdpfx Aforl S Ufstjfl Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Hodpfjz Ayv Usx Aftjfl Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, first registration: 01/1990, Year of construction: 1990, TSA air-suspended tank semi-trailer for diesel and heating oil with 6 compartments, 35.5 m³, equipped with TKZ meter. - 3 x air-suspended BPW axles (retrofitted!) - Disc brakes - ALCOA wheels, painted orange - Tyres: 385/65 R22.5 - ABS - Unladen weight: 6,500 kg - Gross vehicle weight: 33,700 kg 6 compartments: 7,500 / 7,430 / 4,660 / 2,570 / 7,500 / 5,840 litres Hfsdpfx Afowmpgtstel - 6 dome lids - 6 outlets, pneumatically operated - Flow rate: 100 to 1,000 litres per minute - Complete equipment cabinet with pump and M+F TKZ - 2 hose reels, electrically driven - Printer in storage compartment ADR / Tank inspections: new or valid! German semi-trailer! TÜV / main inspection: 10/2024; new inspection possible upon request and at extra cost! Errors and prior sale excepted!