Used High Pressure Washer for sale (28,795)

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Ljdpfjhtyxlox Ackeab Scope of delivery 1 x pressing unit Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 Lajdpfxsu Hz Tqs Ackeb A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure jetting unit, high-pressure inbuilt cleaner mounted on a hot-dip galvanized and painted high-grade steel frame with forklift sleeves, suitable for installation in commercial vehicles. Similar to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Dry weight without water tank: approx. 300 kg Dry weight with 400 l water tank: approx. 320 kg Dry weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Power: 35 HP (26 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass On/Off - Speed control +/- - Emergency stop button Laedpfxof Arugo Acksb - Switch to radio remote control INSTALLED ALARM: - Water shortage safety system to prevent the high-pressure pump from running dry with automatic shutoff. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control; - Engine On/Off; - Bypass On/Off; - Speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 300, 400, 500, or 800 l polyethylene water tank (with steel frame); OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to a hydrant; - UNI 45 kit; - Version with 2 high-pressure reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit with swivel joint and quick coupling; - High-pressure lance kit with fan nozzle 15° / rotating nozzle; - High-flow lance kit; - Rotating nozzle kit; - Twin-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; - Further accessories upon request

Condition: used, Jaw width: 125 mm Clamping width: 220 mm Laedpfxeu Sh Hue Ackeb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-Pressure Cleaning Unit, High-Pressure Jetting Unit, High-Pressure Built-in Jetting System on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 650 x 1,000 x 1,030 mm Unladen weight without water tank: approx. 250 kg Dimensions & unladen weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm & approx. 280 kg Dimensions & unladen weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm & approx. 300 kg HIGH-PRESSURE PUMP: - Manufacturer: COMET - Model: TW 13022S Premium ENGINE: - Manufacturer: Honda - Model: GX 690 - Fuel: Petrol - Cooling: Air - Cylinders: 2 - Displacement: 688 cm³ - Max. output: 24 hp (17.7 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL: - Ignition key Ledpfx Ajdqmttjcksab - Hour meter - Electronic fuel gauge - LED indicator for low oil pressure - Emergency stop button INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump running dry, with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a manometer. HIGH-PRESSURE HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 60 m ½” high-pressure hose - Hose: 50 m ½” high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL TANK: - Capacity: approx. 13 l WATER FILTER: - With washable cartridge and drain valve - Filtration: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine On/Off - Bypass On/Off - Electronic speed control +/- - Emergency stop button - Battery charger for remote control - 300, 400 or 500 l polyethylene water tank OPTIONS ON REQUEST: - 60 m ½” high-pressure hose - Pulsation/booster pump - Second high-pressure hose reel - Electric high-pressure hose reel (requires connection to vehicle battery) ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Mobile hot water generator 10 kW – 12 VDC - High-pressure spray gun kit, swivel and quick coupling - High-pressure lance kit with 15° flat jet nozzle / rotary nozzle - High-flow lance kit - Rotary nozzle kit - Twin-head nozzle kit - Water sandblasting lance kit - Detergent dispenser kit - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Year of construction: 1995, condition: good (used), Stationary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Delivery rate: 56 l/min. Drive speed: 1.475 RPM Drive power: 44 kW with SIEMENS 45 kW 3~motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm weight: approx. 1.115kg Lasdjfl Dwmspfx Ackeb Year of construction: 1995 Condition: in good used condition.

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Lajdpfx Acohf Nakoksb Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: used, functionality: fully functional, mileage: 52,441 km, power: 101 kW (137.32 HP), first registration: 10/2007, overall weight: 7,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 4,520 kg, empty load weight: 4,520 kg, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2007, Equipment: ABS, High-pressure cleaner on transporter: + Nissan + Atleon 70.14 + 52,441 km Lsdpfxewyvvzj Acksab + 5-speed manual transmission + 4-cylinder Cummins diesel engine, 4462cc; 101kW, type ISBe4-140 + 3-seater + electric windows + analog tachograph + heated mirrors + rearview camera + radio/CD + rear window + driver comfort seat + warning beacons + length: 598cm + unladen weight: 4,520kg; gross vehicle weight: 7,000kg High-pressure water system: + 4-cylinder Lombardini diesel engine, type LDW 2214, 2199cc; 65 HP + General Pump, type TS1511, 3500 PSI + electric throttle control + electric hose reel rewinding + 1x high-pressure lance + 2-chamber water tank, approx. 3,000L (180cm x 200cm x 85cm) Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Year of construction: 2025, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - External mini-pneumatic oil separator Ledjf A Nqqspfx Ackoab

Condition: good (used), Year of construction: 2017, Gasoline-powered high-pressure cleaner in tubular frame. Extremely robust. Ideal for construction sites where there is no electricity yet. 100% ready for use. High quality Honda engine. High pressure hose and blasting unit in top condition. Shipping within Germany possible. Transport costs about 110.-€ plus VAT. The device can be visited at any time and tried on site. Lasdpfx Aok Dz R Tjckjb Technical data: Pressure: 150bar Delivery rate: 650 liters / hour weight: 39,5kg more info's in the attached data sheet

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen Lajdpfxev S Ep As Ackjb The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: new, Year of construction: 2020, A new high-pressure pump from Andritz Ritz GmbH is offered. Year of manufacture 2020. Technical details: see nameplate. Laedpfxevu T A Nj Acksb

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Lodpfx Asyacaxockeab Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Lsdpfx Aceyablmokoab Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Lasdpfx Aexugifeckeb Best regards, STS-Reinigungstechnik Team

Year of construction: 1993, condition: used, Material: regular steel Driving force: 55 kW Laedpjgb D Hiefx Ackob Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.5 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 1/min, stroke: 105mm

Condition: used, Year of construction: 2004, Name: High pressure pump Manufacturer: Abel Type: HP-K-25-56 Laodpevu Ui Djfx Ackeb Year built: 2004 Delivery pressure: 100 bar Material: Steel Driving force: 55 kW Flow rate: 14.400 l/h Dimensions: L 2.000 x W 1.000 x H 1.000 mm Empty weight: 1.500 kg Technical doc.: Yes Condition: Second hand Price: On demand

Year of construction: 2012, condition: used, Name: High pressure pump Manufacturer: Abel Type: HP-K-25-56 Year built: 2012 Type of protection: IP 55 Speed: 1480 rpm Operating voltage: 4009 / 690 V Flanges: DN 80 Frequency: 50 Hz Delivery pressure: 100 bar Material: Steel Driving force: 55 kW Flow rate: 14.400 l/h Dimensions: Approx. L 1600 x W 1400 x H 1600 mm Empty weight: 1500 kg Technical doc.: No Laodpfx Ajvtbcbeckob Condition: Second hand Price: On demand

Year of construction: 1990, condition: used, Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm Ledpjgb D Irofx Acksab

Year of construction: 1991, condition: used, High-pressure pumps are used for cleaning machines and apparatuses.
 Vessels, filter cloths of filter presses and pipelines can be cleaned with them. Ledshu U Nfspfx Ackeab Name: High Pressure Pump Manufacturer: Uraca Type: KD613 Year built: 1991 Material: mild steel Driving force: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liter/min Condition: Used Technical documentation: yes Price: on request

Year of construction: 1977, condition: used, Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year built: 1977 Material: mild steel Driving force: 55 kW Lsdpfxjh Unlkj Ackoab Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 liters/min Operating pressure: 100 bar Operating voltage: 380/660 V Type of protection: 44 Flanges: DN 65 Condition: Used Message: Frequency range: 50 Hz, protection class: 44, flanges: DN 65 Price: on request

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) Lsdpsx E Utiofx Ackjab High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3520191300779, operating pressure: 220 bar, input voltage: 400 V, overall weight: 85 kg, The Nilfisk MC 5M is equipped with a hose reel and a new rotor nozzle. Ledpfx Aouwlxfjckjab The water pressure can be adjusted using a dial on the high-pressure cleaner. It is extremely maneuverable and a so that it can also be used on the move in everyday work. Technical data Pressure: 220 bar Cleaning effect: 6.2 Max. Inlet temperature: 60 degrees Dimensions: 890x570x1020 (length x width x height ) in mm Weight: 85

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Ljdpfxof Hly Sj Ackeab Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time.

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Lasdpfegz H Akox Ackeb Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Driving power: 55 kW without motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg year of construction: 1998 Condition: in good used condition.