Used Hob for sale (309)

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm Ncodpfx Adewi Tdbewol table size: 0/ 700 mm Location: In our warehouse

Condition: good (used), Liebherr - Lorenz S800 Gear Hobbing Machine -Well-maintained machine with comprehensive accessories -1x pallet of change gears -1x pallet of hobbing cutters -1x pallet of arbors -DOCUMENTATION -Max. workpiece length with counter support: 600 mm -Max. workpiece length with counter support retracted: 800 mm -Max. travel of the milling slide: 360 mm -Largest pitch machinable with largest workpiece: 5 Pi / in standard range: 8 Pi -Spindle taper - milling spindle: MT 5 -Arbors: 22/27/32/40 mm -Max. cutter diameter: 186 mm -Max. cutter length: 170 mm -Max. cutter shift: 80 mm -Cutter speeds: 40-220 rpm -Feed rates steplessly adjustable / horizontal Ncsdpfxew R Tyks Adwjl -Feed rates steplessly adjustable / vertical -Feed rates steplessly adjustable / tangential -Clamping table without coolant rim: 550 mm -Clamping table bore: 100 mm -Clamping arbor taper: MT5 Dimensions: LxWxH 3.6 x 1.8 x 1.9 meters / Weight 5000 kg Subject to errors and input mistakes.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, VEB Fritz Heckert ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Njdpfx Ajw Dvanjdwjcl Accessories: 2nd milling head, hob cutters in various modules, steadies, clamping devices, etc.

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16 Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Nedpfswxxxcsx Adwscl Radial feeds: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: ready for operation (used), thread length: 3,000 mm, Thread milling and hobbing machine Maximum spindle bore: Ø 80 mm Depending on the travel, max. Ø 250 mm and min. Ø 20 mm are possible. Nodpfx Adsv Huihjwjcl Machining length: 3000 mm With accessories: change gears, steady rest For further technical data, see the PDF file.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Machine still under power and production can be seen at any time. Technical Data – PE 150 This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received. Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces. Hob Cutter: Max. permitted cutter outside diameter: 130 mm Max. length (depending on cutter arbor diameter): 220 mm Slide Travel: Radial (X-axis): 150 mm Tangential (Y-axis): 170 mm Axial (Z-axis): 200 mm Max. Swivel Angle of Milling Head: In +A direction: 30° In -A direction: 45° Workpiece Table: Outer diameter: 160 mm Bore diameter: 63 mm Overall Dimensions of the Machine: Length: 5,820 mm Width: 4,047 mm Height: 2,810 mm Approximate Weight of Machine: 8,000 kg Speeds: Feeds: Axes X, Y, and Z: 1 to 3,000 mm/min Rapid Traverses: Axes X, Y, and Z: 3,000 mm/min Ncsdpfxju N E Rrj Adwjl Spindle Speeds: Tool (S-spindle): 150 to 600 rpm Workpiece table (C-axis): 1 to 125 rpm Electrical Equipment: Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48.5 kVA Cable cross-section: 25 mm² Fusing: 100 A

Condition: like new (used), Year of construction: 2004, More Photos coming soon hob cutter: -Largest permissible tip circle diameter: 80 mm Largest toothed length: 70 mm Largest total length: 240 mm Taper for trimming with counter bearing steep taper 1:3, 4286 Mounting diameter of the collet: 32 mm Sliding paths: Radial (X-axis): 100 mm Tangential (Y-axis): 160 mm Axial (Z-axis): 300 mm Tailstock (Z4 axis): 350 mm Loading gantry (X5 axis) 3800 mm Largest milling head swivel angle: Direction +A: 40 degrees Direction A: 40 degrees Workpiece spindle: Outer diameter: 160 mm Bore: 63 mm Overall dimensions of the machine: Length: 9130 mm Width: 3895 mm Height: 3200 mm Gain of the machine: 8400 kg Feed rates: X and Z axes: 1 to 10000 mm/min Y axis: 1 to 5000 mm/min Rapid traverse: X, Z and Z4 axes: 10000 mm/min Ncsdpfx Adsqpf Ifswol Y axis: 5000 mm/min X5 axis: 150 mm/min Speeds: Tool: 300 to 4000 min^-1 Workpiece spindle: 0 to 1000 min^-1 Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48 kVA Cable cross-section: 35 mm2 Fuse protection: 70A wälzfräser: -Großter zulassiger Kopfkreissdurchmesser: 80 mm Groste verzanne Lange: 70 mm Größte Gesamtange: 240 mm Kegel zum Abstutzen m Gegenlager Steilkegel 1:3, 4286 Aufnahmedurchmesser der Spannzange: 32 mm Schlitterwege: Radial (X-Achse): 100 mm Tangential (Y-Achse): 160 mm Axial (Z-Achse): 300 mm Reitstock (Z4-Achse): 350 mm Ladeportal (X5-Achse) 3800 mm Größter Fräskopfschwenkwinkel: Richung +A: 40 Grad Richtung-A: 40 Grad Werkstückspindel: Außendurchmesser: 160 mm Bohrung: 63 mm Gesamtabmessungen der Maschine: Lange: 9130 mm Breite: 3895 mm Höhe: 3200 mm Gewinnt der Maschine: 8400 Kg Vorschübe: Achsen X und Z: 1 bis 10000 mm/min Achse Y: 1 bis 5000 mm/min Eilgänge: Achsen X, Z und Z4: 10000 mm/min Y.Achse: 5000 mm/min X5-Achse: 150 mm/min Drehzahlen: Werkzeug: 300 bis 4000 min^-1 Werkstückspindel: 0 bis 1000 min^-1 Betriebsspannung: 400 V Versorgungspannung: 230 V Steuerspannung: 24 V Frequenz: 50 Hz Anschlußwert der Maschine: 48 kVA Kabelquerschnitt: 35 mm2 Absicherung: 70A

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Ncsdpfx Adew Al U Ejwol For more information, please contact us.

Condition: excellent (used), functionality: fully functional, overall weight: 34 kg, input voltage: 230 V, DGUV certified until: 01/2027, Cream Whipping Machine Hobart Model: G 5 R Tabletop model for 3–5 litres of raw cream Timer: 1 to 6 minutes Stainless steel bowl up to 5 litres Connection: 220V Dimensions: 410 x 410 x 530 mm (W x D x H) Used equipment, cleaned and tested Options: Ncodswpz Etjpfx Adwel Delivery service Spare parts service Maintenance contract Service package Visit our showroom!

Year of construction: 2021, condition: used, functionality: fully functional, You are bidding here on a Hobart rack conveyor dishwasher, model CN series. The machine was first installed in a canteen operation in 06/2021 and was used there for lunch service. Due to business closure, operations stopped in 12/2024. The dishwashing system was purchased new by the operator, treated with care, and all necessary maintenance was professionally performed. The machine will likely be available for delivery from February 2026. HOBART presents the new generation of the proven CN series as a powerful PROFI version – the new rack conveyor dishwasher delivers increased efficiency and cost-effectiveness, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily demands of commercial kitchens. Optimal wash results with low energy consumption – even for plastic items. The CN series rack conveyor machines are modular, operating from left to right with pre-wash, main wash, rinsing, drying, and roller conveyor discharge. You will receive an invoice with indicated VAT. Equipment details: • Climate exhaust air heat recovery for smart energy use • Climate-Pro heat pump saves up to 20 kWh • LC detergent saving system • Triple rinse • Washing system with wide-angle nozzles Ncodpfox R R Utjx Adwel • Dynamic-Dry drying • Automatic water consumption • Empty rack detection • Permanent soil removal: ASR soil discharge • Control system with USB interface • Drop-in washing system • Color-coded cleaning aids • Coded curtains • Coded wash and rinse arms • Deep-drawn drain fitting • Fully deep-drawn wash basin • Easy-to-clean condenser • No contact between wares and wash water • TRI-RINSE: high-quality rinsing result via 3-stage zone • PERMANENT-CLEAN soil removal: revolutionary filter system eliminates manual pre-rinsing • LC detergent saving: reduces detergent consumption by up to 50% • Automatic water adjustment: machine consumption automatically adapts to load • CLIMATE heat recovery: optimally uses exhaust air • CLIMATE-PRO heat pump: innovation meets efficiency and cost-effectiveness • RACK-FLOW sensor system: easy one-person operation • Fully deep-drawn tank: no residue build-up • Easy-to-clean condenser • Deep-drawn drain fitting • DYNAMIC-DRY drying: optimal results thanks to new blower technology with higher dynamic airflow—up to 50% increased efficiency Technical data: • External dimensions (W x D x H): 4215 x 2336 x 2150 mm (see photo sketch) • Pass-through width: 510 mm • Pass-through height: 440 mm • Electrical connection: 400V 3NPE 50Hz; 26.5kW • Model: CN-C-A-CDC • Serial number: 866707054 • Year of manufacture: 2021 6 months warranty on electrical components, limited to the replacement of defective parts (excludes labor costs for removal and installation). Warranty claims require installation and commissioning by an authorized Hobart service provider. Subject to change and errors.

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos Ncsdpfx Adjwnn U Eewjl -Dimensions: 700/400/H710 mm -Weight: 125 kg

Condition: used, Planetary mixer Hobart, 140 L Ncsdpex Rnwlofx Adwel In good condition, serviced The set includes 3 attachments

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Caenaho, geared motor type PA-09 / RD-09 -Voltage: 110 V / 50 Hz Ncjdpfx Aeguzr Rodwol -Speed: 137 rpm -Performance: 1.27 m Technical data: see photo of the type plate Quantity: 1 piece available Price: per piece -Dimensions: 240/120/H200 mm -Weight: 6.2 kg

Condition: good (used), functionality: fully functional, Hobart meat grinder. Ncedpfxeybaarj Adwel Model: 4732 380V.

Year of construction: 2011, condition: good (used), functionality: fully functional, Automatic bread slicing and packaging line. Fully operational, after service inspection. Used very little – mostly as a backup unit. Maximum capacity approx. 2,400 pcs/h. Nodpfxox A E E Uo Adwecl

Condition: excellent (used), functionality: fully functional, Dishwasher Hobart UX 30 EB Universal dishwasher Hobart model: UX 30 EB 3 wash programs, Genius X wash tank filter system Wash tank pump Ncsdpfx Adoxp Ug Iswol Easy Clean concept 3 programs 1 wash basket Connection: 400 V, 32A CEE plug, Dimensions: 780 x 820 x 1980 mm (W x D x H) Used machine Options: Water filter Maintenance contract Service package Delivery service Instruction and commissioning We have many more dishwashers in stock!

Condition: ready for operation (used), Year of construction: 1984, SAC Surface Planer FS 430 Table length mm 2900 Infeed table mm 1550 Outfeed table mm 1310 Table width mm 430 Table height mm 800 Cutterhead diameter mm 120 Cutterhead speed rpm 5000 Number of straight knives 4 Straight knives mm 430 × 35 × 3 Rabbeting depth mm 20 Planer fence mm 1005 × 180 Fence tilt 0-45 Motor power HP 4 Required space mm 2900 × 700 × 960 Ncsdpex S Ivksfx Adwol Weight kg 475 Condition: function tested

Year of construction: 2015, condition: excellent (used), Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph Njdsfv Spcopfx Adwjcl

Condition: good (used), Hobart H600 Planetary mixer Planetary mixer, 60L stainless bowl, whisk attachment, variable speed, with timer, 3Ph Nedpfx Adsnxlwqowocl

Condition: excellent (used), functionality: fully functional, Cream blower Hobart Model: G 3 R Table model for 1-3 liters of raw cream with nozzle discs Time controller 1 to 6 min Nodpfx Asgx T E Dedwscl Stainless steel kettle Connection 220V Used equipment cleaned and checked Come to our large bakery machine warehouse!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, total width: 550 mm, total length: 700 mm, total height: 1,050 mm, input frequency: 50 Hz, year of last overhaul: 2025, electrical fuse: 16 A, Planetary Mixer Model: H300 with 3 gears/power levels 30 liter stainless steel kettle with 1 broom and 1 flat beater Boiler lift manual protective grid Connection 400V, 1.1kW, 2.6A, 16-CEE plug Used machine cleaned and checked Njdpfoin Eaasx Adwjcl 6 months warranty Come and take a look at our large warehouse of bakery machines

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, DGUV certified until: 11/2026, total width: 410 mm, total length: 410 mm, total height: 530 mm, empty load weight: 15 kg, input frequency: 50 Hz, year of last overhaul: 2025, overall weight: 15 kg, electrical fuse: 10 A, power: 1 kW (1.36 HP), Hobart Cream Whipper G 5 R-FC Tabletop model for 3–5 liters of cream Easy operation Timer: 1 to 6 minutes Stainless steel bowl Connection: 220V Dimensions: 410 x 410 x 530 mm (W x D x H) Used device, cleaned With warranty and spare parts service Quality from a specialist dealer! Benefit from over 35 years of experience! Ncsdpfxoxmrams Adwsl Options: Maintenance contract Spare parts box for added security Delivery service Instruction & commissioning Further cream whippers available from stock!

Condition: refurbished (used), functionality: fully functional, Taylor Hobson Tallyrond 300 In good condition, Completely overhauled by sm-instruments (with new control unit and software) Ncsdpexpqwiefx Adwol Includes side table and accessories Delivery time: several weeks

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06202305, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine Nsdpfsw Ec U Ijx Adwecl - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes - Air shock web width 360 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Universal dishwasher HOBART UXS Bäko-10A Hobart UXS Bäko-10A, year of manufacture 2018, fully functional, functionally tested and cleaned, incl. rinsing basket and holder for trays. Machine with integrated rinse aid and rinse aid dispenser. Hobart SMART control with 2 / 4 / 6 minute wash programme as well as intensive and hygiene programme. Detergent dosing, 15.6 kW connected load, 380 / 400 V. Current new price: over EUR 13,000 net (!) Ncjdpev R E Ehjfx Adwol Dimensions (outside): UXS Bäko-10A, year of manufacture 2018 Width: approx. 80 cm, depth: approx. 95 cm, height with closed door: approx. 199 cm Washroom dimensions: approx. 60 x 76 cm, approx. 86 cm drawer height PRICE: EUR 6,950 net - Available immediately. Currently also in stock as a comparable used machine from 2015, in good condition (slightly cheaper) or UXT (double size) year 2017. If you are interested, we look forward to receiving your enquiry.