Used Holz Her for sale (163)

Condition: used, Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm Hjdpfx Aeg Ehageabsnu -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Condition: used, Year of construction: 2005, Used machine Year of manufacture 2005 Technical specifications: - Base machine 555 - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968, 18 vertical drilling spindles with a 32 mm pitch, individually accessible, T-shaped arrangement, 12 in the X-axis and 6 in the Y-axis, max. drilling diameter 35 mm (depending on panel thickness), spindle extension stroke: 70 mm, direction of rotation: alternating right-hand and left-hand rotation, n = 4725 rpm continuously adjustable, 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946, 3.5 kW, pneumatically pivotable 90°, n = 5300 rpm, tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm Sawing/grooving in X and Y directions - Milling unit 7935 with 16 kW spindle, water-cooled - Milling unit 7982 for lock case milling - Tool changer 7996 with 18-station magazine (disk) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: Short-term Hnedewlwn Nspfx Aabsu Storage location: Poland

Year of construction: 2016, condition: good (used), • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Hnodowkf Twjpfx Aabeu Buffing unit 1940 For edge cleaning and polishing

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements Hnedpfxeu R Syio Aabou when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: defective spare-parts repository (used), HOLZ-HER 1230 Automatic. The machine's controller lacks the panel required for automatic formatting. With the help of an electrician, it can be converted to normal automatic operation. Until then, operation is not possible in either manual or automatic mode. Hnsdpfx Aeuuf Akeabju Industrial machine in good condition, but thus it is advertised in incomplete condition.

Condition: excellent (used), Feeder Hodpfxewktalo Aabjnu 3 rollers with stand (rollers are new) New feed rollers 8 speeds Very good condition

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Number: 1x motor -Motor type: -Power: kW Hnedec Iprfepfx Aabsu -Voltage: 380 volts -Tool holder: SK40 -Spindle speed: 9000 rpm -Dimensions: 340/270/H400 mm -Weight: 35 kg

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Cutting depth 80 mm Saw blade diameter 300 mm Hnjdjvymf Uepfx Aabeu Motor 4 kW - 4420 rpm. Incl. middle workpiece support on 4 fields Incl. 2 length stops with manual scale Availability: short term Storage location: Röllbach

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 558/0-112, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 Hjdpfx Aaoh Uyg Ejbenu edge feeding unit 1901 tracer nozzle printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer is an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - EVOLUTION diamond formatting cutter set - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen 21.5", 16:9 Hnodju Tid Hopfx Aabsu - Workpiece length measurement LASER - Milling unit 7830 - 7887 tool changer 6-position magazine pick-up - ECO vacuum system - Air conditioning unit for switch cabinet cooling - Tool changer 7874 - Angular gear 7869 - Adapter for Clamex milling cutters - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Manual control unit - Tool set - EVOLUTION for XL drilling head 7885 - new exhibition machine -

Condition: used, Chip extraction, filter extraction, bag filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm Hodpfxeb A E Uhs Aabenu -Weight: 135 kg

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 completely overhauled with new glue application system Hedjwka H Sopfx Aabsnu Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Hnsdpfx Aaonxkm Ejbeu Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation Hodpfx Aou R Sy Ajabonu - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete Hedov D Nugjpfx Aabonu -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Year of construction: 2015, condition: used, STORE-MASTER 5110 automatic panel storage system used Built in 2015 Was a demonstration unit from Holz Her and only went into production with one machine in 2019 30% to 50% space savings Minimal distances between stacks (from 70 mm) = optimal use of space Excludes panel damage, panel separation control with weight measurement Fully automated process (storage/retrieval) and machine loading Adaptable for all panel formats (1.2 to 5.6 m) depending on options 90° panel rotation Low manipulator height External dimensions: Length 8.5 m, width 7.5 m Max. panel size 3.2 x 2.1 m Min. panel size 1.2 x 0.6 m Max. lifting weight 150 kg Stacking height 1.8 m, max. 2.0 m m Max. lifting height 2.1 m Travel speed: Horizontal approx. 120 m/min Vertical approx. 45 m/min. Manipulator suitable for slightly air-permeable, smooth materials such as: e.g., coated chipboard, blockboard, raw MDF, raw HDF, raw particle board (good quality) Upgrade: Vacuum capacity for suction cups on the manipulator 100 m³/h for a mixed material in the warehouse, such as MDF and raw chipboard Connected load 6 kW Vibration-damped gantry bridge, manipulator head with lifting device, and steel gripper arm, space-saving due to its low design Articulated arm design with direct drive via steel belt therefore wear-free and insensitive to vibrations Electronic panel position measurement Panel rotation correction Hedowkbagspfx Aabsnu The panels are measured with sensors and neatly stacked Separation device for thin panels via integrated weight measurement Storage and retrieval station Direct loading onto the machine Warehouse software Former list price: €110,000.00 Availability: Short-term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm Hsdpoq Au Huefx Aabsnu rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: good (used), roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails Hnsdpfsv D U A Aex Aabsu -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 started box/ total approx. 7000 pieces -Type: 3.0x25 A2 stainless steel -Price/Delivery: complete -Transport dimensions: 490/300/H140 mm -Total weight: 12.7 kg

Condition: used, Year of construction: 1997, Second hand machine Year of manufacture: 1997 Condition: well maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feed for roll and strip material, automatic 1901 Adhesive application cartridge 1906 with sensing nozzle Printing unit pneumatic, motorized adjustment to edge thickness 1926 cross-cutting unit 2-motor, pneumatic swiveling 1918 Trimming unit rigid up to 30 mm 1962 Milling unit MOT 5 with multifunction flush, radius, chamfer 1966 Radius scraper 1927 corner copying 1983 Surface scraper 1964 Buffing unit 1944 Blowing nozzles Technical data: Workpiece thickness min./max.: 6/60 mm workpiece width min. 60 mm workpiece length min. 140 mm glueing thickness max. 13 mm weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short term Hjdpfx Aomxp I Hoabonu

Condition: as good as new (ex-display), Year of construction: 2023, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,110 mm, cutting depth: 80 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid Hnsdpjtwpgmefx Aabou - center workpiece support - longitudinal stop with digital dimension display - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)

Condition: good (used), Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 Hsdpfxevpf Ute Aabonu -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Hnedsvymdqepfx Aabeu Availability: short term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Hnsdpfx Aaeiamufjbsu Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK Hnedpfx Aajv D Nvdjbou .: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

Condition: good (used), roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 box/ total approx. 7200 pieces Hedpfx Aov D U Ekeabsnu -Type: 3.0x22 A2 stainless steel -Price/Delivery: complete -Transport dimensions: 490/300/H140 mm -Total weight: 12.6 kg