Used Holzkraft for sale (215)

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Lhjdpfx Ajv Sk Tmsdwsb Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Lhedehk S Stjpfx Adwsb Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Lhedpfx Adjhk S Swewjb Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm Lhedpfx Aohp Rcyedwob working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Arch milling protection hood Anodized aluminum sliding carriage Telescopic miter fence Aluminum stop jaws

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Lodpfsdqzh Rsx Adwshb Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights Ledpfx Adod Hx Hmewjhb weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Lhsdsd Hx Hnjpfx Adwsb Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm Lhodpfx Aoci Tvhedwsb spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. Lhjdpfx Aded Hx Hpoweb The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes

Condition: new, Year of construction: 2026, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Lodpfxeih Dwve Adwjhb 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table Lhedpeih Dxljfx Adweb sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Ledpfx Adohkzttowjhb Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Lodpfx Adecnw U Dowehb Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2026, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Ljdpfx Adjcnxmzswohb Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, cutting width at rip fence: 1,200 mm, type of input current: three-phase, input voltage: 400 V, main saw diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, cutting length (max.): 1,250 mm, With a pivoting 400 mm saw blade With manual height and angle adjustment 130 mm cutting height Lhodpfjwa A E Ajx Adwsb Sample machine built in 2022

Condition: new, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Ledpfxewa Dbxo Adwshb Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: new, functionality: fully functional, table length: 950 mm, table width: 450 mm, input voltage: 400 V, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Dimensions and Weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Lodpfx Adswg Ddaewehb Extraction Connection Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: new, Stürmer Maschinen GmbH is launching a new generation of Holzkraft band saws. With innovative technology and sophisticated design, the new FBS models set standards in precision and versatility. Thanks to their sliding carriage and outrigger, these band saws are ideal for cutting beams, blocks, and insulation materials. Whether in prefabricated housing, the packaging industry, or paper processing – these machines offer a reliable solution for a wide variety of applications. Each model is available in various versions and can be individually tailored to specific requirements. We will work with you to develop the optimal solution for your production processes. Interested? Let our experts advise you! Technical specifications: Particularly smooth and precise operation thanks to the torsion-resistant machine housing Solid cast flywheels and chip scraper Gray cast iron saw table with ground and polished surface Smooth-running aluminum sliding table with telescopic crosscut stop and folding stops Aluminum parallel stop with round bar guide, easy to move High operating comfort thanks to the mobile control panel that can be moved within the working radius Special saw blade guides at the top and bottom Saw blade tension indicator Integrated lubrication system with felt pads Precise cutting height adjustment via rack and pinion with millimeter scale Self-braking motor Lhjdpfx Aswa Srfjdweb Automatic star-delta start The photos show examples of the different models. Please contact us for your specific requirements. Sold through authorized retailers.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 1,000 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, power: 9 kW (12.24 HP), Equipment: scorer, Robust steel and grey cast iron construction • Standard with three speeds • Equipped as standard with NC control and 7-inch LCD display for setting all machine axes • Saw unit with permanently precise dual pivot segment guide, 6-year Holzkraft warranty on wear of pivot segments • Electrical positioning of cutting height and saw blade tilting Lhodpfxowz Nzye Adwob • Scoring saw unit with separate scoring motor • Powerful industrial motors • Smooth-running and precise sliding table made of anodised aluminium with proven, permanently smooth ball contact system on hardened rails, 10-year warranty on wear of guide tracks • Large support surfaces thanks to standard table extension and width extension • Grey cast iron saw table • Folding parallel fence with fine adjustment and round bar guide • Crosscut fence, extendable to 3200 mm, with two flip stops and eccentric clamp • Particularly large outrigger with material roller, extendable to 2400 mm • Side-swivelling saw blade pendulum guard with integrated extraction port • Optionally available: mitre fences extendable up to 1500 mm for mounting directly on the sliding table • Numerous equipment options for individual customisation

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Lhjdewg Dy Ispfx Adweb Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 140 mm, saw blade diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 45 °, Equipment: motor brake, scorer, Heavy-duty sliding table saw with scoring unit and motorized sawblade adjustment Technical Description Lodpfxjwa I Ups Adwehb Motorized sawblade tilt and height adjustment with digital display Belt-driven main sawblade with speeds of 3500/4500 rpm Heavy-duty weight ensures vibration-free operation Large outrigger table with material roller Parallel stop with round bar guide and digital position display Extendable aluminum longitudinal stop with two folding stops 7.5 kW main motor mounted on a robust cast iron frame Four-bearing sliding table made of anodized aluminum with high torsional rigidity Standard table extension and table extension made of heavy-duty sheet metal Large pendulum guard can be easily raised using a gas spring Quick and convenient sawblade changes thanks to the Rapid clamping system Multiple locking mechanisms on the sliding table Dimensions and Weights Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 850 kg Extraction connection Extraction nozzle diameter 120 mm Extraction nozzle diameter of saw blade guard 80 mm Electrical data Power consumption 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the saw blade 3200 mm Saw blade inclination 90 – 45 ° Max. cutting height 90° 140 mm Max. cutting height 45° 100 mm Saw blade diameter 400 mm Saw blade speed 3500/4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring saw blade diameter min. 120 mm Scoring saw blade diameter max. 125 mm Scoring saw blade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: like new (used), functionality: fully functional, CNC drilling machine for precise single-part and series production Drilling head with seven vertical, four horizontal spindles and a groove saw unit Lhjdpfx Aswz Nuysdwsb Equipment: Roller conveyor for workpiece infeed and outfeed Edge sensor Pressure-boosted Y-axis for processing hard materials Automatic lubrication Machine operator interface software Maestro CNC Qwerty keyboard for convenient data input

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17456, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 7 kW (9.52 HP), Equipment: motor brake, scorer, New machine built in 2021, serial number: Stable steel and gray cast iron construction With three speeds as standard With NC control with 7 inch LC display as standard for adjusting all axes of the machine Saw unit with permanently precise double swivel segment guide, 6-year Holzkraft guarantee on wear of the swivel segments Positioning of the cutting height and the saw blade swivel electrically Scoring unit with separate scoring motor Powerful industrial motors Smooth and precise format sliding carriage made of anodized aluminum with proven and permanently smooth ball contact system on hardened, 10-year guarantee on wear of the guideways Large support surfaces thanks to standard table extension and widening Lhedovxvbpjpfx Adwsb Gray cast iron saw table Fold-down parallel stop with fine adjustment and round bar guide Crosscut stop, extendable up to 3200 mm, with two folding stops and eccentric clamp Particularly large boom with material roll, extendable up to 2400 mm Saw blade pendulum guard that can be swung away to the side with integrated suction nozzle Optionally available: mitre stops that extend up to 1500 mm for attachment directly to the sliding carriage Numerous equipment options for individual adaptation

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 115 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 45 °, power: 4.7 kW (6.39 HP), Equipment: scorer, With a pivoting 350 mm saw blade and scoring device. With manual height and angle adjustment and a digital display on the parallel stop. 115 mm cutting height. Sample machine built in 2022. Lhedpfxewa Ande Adweb

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Lodpjwgz T Ssfx Adwjhb Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.