Edge sanding machine

Holzkraft KSO 150 F Basic

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Lajdpfxeff Ed To Adhef Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short-term

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), AZR 600 – 18.5 kW 30 round knives with welded knife holders incl. 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Pusher with hold-down device Vibration-damping machine feet Laodji Hb Iaspfx Adhsf Automatic star-delta start-up Automatic shutdown when hopper is empty Control cabinet with 5 m cable and PLC-controlled Feed opening: 600 x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW – 400 V – 50 Hz – 3 Ph. Hydraulic motor: 0.75 kW – 400 V – 50 Hz – 3 Ph. Subject to technical changes and errors.

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm Ledpfx Aed R Ev Djdhoaf • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Type 500 Lsdpfxjdzttao Adhsaf Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Condition: new, bore capacity in steel (diameter) 32 mm throat 257 mm bore stroke 115 mm boring spindle MK 4 boring chuck 16 mm bore depth 120 mm table surface area 475 x 425 mm column diameter 92 mm total power requirement 1,1 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top Lodpfx Aefv H H Uedhoaf

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,820 kg, 1 new hopper-type shredder DH 600, 18.5 kW Rotor width: 600 mm Rotor diameter: 220 mm Number of knives: 28, concave ground, four-way reversible Motor power: 18.5 kW Electrics: 400V, 50 Hz Control: control cabinet, fan-cooled, Siemens PLC Lajdpfx Aemv Eh Nsdhjf Hopper opening: extended hopper Hopper volume: approx. 0.60 m³ Screen: 20/25 mm or as required Hydraulics: 40-liter tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1–3 m³/h, depending on material and screen size Extraction nozzle: 160 mm Extraction capacity: min. 28 m/s

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Lasdpoyhzhnjfx Adhof Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: as good as new (ex-display), Year of construction: 2024, - Edge and frame press, single-sided/stationary - Gluing stand without frame pressing mechanism - Usable dimensions in mm as edge press: 2900 x 1600 - Usable dimensions in mm as frame press: 2600 x 1600 (with option QJ 002) - External dimensions in mm: 3100 x 700 x 2150 mm (L x W x H) - 3 roller-bearing-mounted, vertical pressure beams with robust bevel gear and counter bearing - Press stroke: 150 mm, pressing force: 2000 kg - Frame pressing mechanism with left-hand counter bearing - Sliding carriage for width adjustment, with central locking system - 2 horizontal bevel gears - Pressure beam with spindle pressure Lsdpfx Adehd N Eqjhsaf - Chassis with 4 swivel casters (2 of which are braked) - Paint finish: RAL 9002 grey-white, pressure plate and counter bearing RAL 5010 gentian blue

Year of construction: 2026, condition: new, functionality: fully functional, Applications & Customer Benefits: Lodpfow Ughpsx Adhoaf Screw conveyors efficiently transport dry, powdery, or granular bulk goods, biomass, pellets, and metal chips for applications like emptying, dosing, sieving, loading, and mixing. Their modular design ensures flexibility, high-quality performance, and cost-effective solutions tailored to customer needs. Key Features: • Modular system for customizable screw conveyors • Supports horizontal and angled configurations • Options for metal chip and biomass handling • Durable materials including Hardox and S355 • Infinite spiral or segmented spiral designs Tech Highlights: L 3.44 m · H 0.68 m · W 0.33 m

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 3000mm Table size: 960mm x 352mm Auxiliary table: 330mm x 330mm Sanding roller diameter: 60mm / 100mm / 120mm Veneer sanding attachment: yes Oscillation: yes Sanding unit swivels: yes Dust extraction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg Laedpfx Adegtdpujhof