Used Homag Bof 211 for sale (474)

Condition: used, machine/vehicle number: 006906, X axis working area: 4175 mm Y axis working area: 1730 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 20 Total number of tool changer positions: 18 Podpowgktbsfx Ab Ierd

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0-201-06-9022, rotational speed (max.): 24,000 rpm, distance between spindles: 32 mm, working height: 950 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece length Single setup: max. 4,000 mm Pendulum setup: max. 1,375 mm Workpiece length for milling operations with 25 mm tool diameter Single setup: max. 4,175 mm Double setup: max. 1,950 mm Pendulum setup: max. 1,550 mm Podsw Upu Sspfx Ab Ijrd Workpiece width – front fence, operator side Milling with 25 mm tool diameter: max. 1,220 mm All units (except drilling head): max. 1,150 mm Workpiece width – rear fence Milling with 25 mm tool diameter: max. 1,730 mm All units: max. 1,600 mm Extension of consoles available as option, order no. VK 7375 Workpiece thickness Including clamping devices: max. 300 mm With standard clamps, unlimited: up to max. 60 mm Dimensions are not equivalent to the maximum possible processing sizes per unit – see separate tables Minimum workpiece size: Dependent on clamping devices, workpiece surface and contour Working height Bottom edge of workpiece: 950 mm Main spindle Power S6: 18.5 kW Power S1: 14.5 kW Tool holder: HSK F63 – DIN 69893 Tool weight: max. 6 kg including holder Tool length: max. 200 mm from lower edge of motor spindle Milling tool diameter: max. 180 mm Grinding tool diameter: max. 200 mm Speed range: 0 – 18,000 rpm Full torque: 0 – 12,000 rpm Full rated output: from 12,000 rpm Maximum speed: 24,000 rpm Disc tool changer Capacity: 18 positions Tool holder: HSK F63 Configuration option 1: 18 x max. diameter 130 mm Configuration option 2: 9 x max. diameter 180 mm and 9 x max. diameter 70 mm Drilling head Spindles: 17 Motor power: 4 kW, frequency controlled Speed range: 4,500 – 6,000 rpm Function: vertical drilling Stroke: 50 mm Drill spindles: up to max. 35 mm drilling diameter Spindles X-direction: 11 Spindles Y-direction: 7 Spindle spacing: 32 mm Total drill length: 70 mm Shaft diameter: 10 x 20 mm Rotation direction: Alternating left/right MACHINE DETAILS Footprint: 5,000 x 7,750 x 3,000 mm EQUIPMENT 2x vacuum cups per console Note: Unless expressly stated otherwise, tools, tool holders, units, and mechanical clamping devices that may be visible in photos and videos are not included in the scope of delivery.

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center featuring robust engineering, ideal for industrial use in furniture manufacturing and interior fit-out. ⸻ Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Travel paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Controller: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing etc. • Vacuum clamping system: grid nesting or console table • Optional: edge banding and labelling ⸻ Special Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior construction ⸻ The machine is available immediately. Disassembly and transport can be arranged by our service team upon request. ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT, subject to change and errors excepted. Prodpfxoxk Tumj Ab Isd

Condition: ready for operation (used), Year of construction: 2004, Travel Z: 535mm, travel speed X/Y/Z: 60m/60m/30m/min, max. workpiece dimensions X/Y/Z: 4175mm/1730mm/300mm. Main spindle: power: 18.5kW, speed: 24000rpm, max. tool diameter: 200mm, max. tool length: 200mm, max. tool weight: 6kg. Drill diameter: 35mm, speed: 6000rpm, power: 4kW, projection stroke: 50mm, swivel: 100°, cross-cut saw diameter: 180mm, number of spindles: 4, vacuum pump capacity: 100m³/h. Documentation available. On-site inspection is possible. Pjdpfx Abewmqw Hs Ijrd

Condition: ready for operation (used), Technical characteristics Workpiece length max: 5200 mm - for tool Ø 25: 5375 mm Workpiece width max: 1400 mm - for tools Ø 25 mm: 1550 mm Workpiece thickness 300 mm max up to 60 mm with a standard clamping device Console table: consoles with front stop 8 units Rear stop (fixed) 4 units Lifting rails Console length 1340 mm Side stops left 2 units - right 2 units Suction cups 160 x 115 x 100 mm 16 units Suction cups 125 x 75 x 100 mm 8 units Vacuum pump 140 m3 / h Modern control system from a WINDOWS computer WINDOWS XP operating system Industrial pc 17 inch flat screen Ethernet network connection WOODWOP program Voltage 400 V 50/60 HZ Additional vacuum pump 100 m3 / h Chip conveyor belt 13-spindle drilling head 9 vertical 6 x drilling spindles 4 Y-drilling spindles 4 horizontal spindles 2 pins in X Prsdot Eygljpfx Ab Ijd 2 Y-pins Main spindle 11kW HSK F63 Liquid cooling 1000/24000 rpm Ø of tools 180 mm max C axis including C axis tilt drive Unlimited swivel range 12-station tool changer Ø 135 mm CONSOLE LED positioning system Caractéristiques usinageWindows PCVacuum pump Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24 Prjdpevctlgefx Ab Isd

Condition: ready for operation (used), Technical characteristics 5 axes Max workpiece length single 6000 mm, pendulum 2375 mm Max. workpiece width rear 1300 mm Max. workpiece thickness 300 mm, incl. clamping device Consoles with front stop 10 units 100 mm high suction cups for processing the underside of the workpiece Vacuum pump 2 x 100 m3/h Windows control system Windows XP operating system 17" TFT flat screen WOODWOP program Graphic representation of the clamping stations Modern 3D graphic interface software Remote diagnostics Operating voltage 400 V, 50/60 Hz Control cabinet can be positioned on the right or left 5-axis main spindle 15 kW drive5+ HSK F63 Predpfxet Ttn Ej Ab Isd Liquid cooling Electronically controlled from 1000 -24000 rpm Tool length 230 mm max Tool Ø: max 180 mm for milling tools 350 mm max for saw blade use Z-axis travel 750 mm Vibration sensor for monitoring the spindle during machining Tool changer by disc 18 stations D=130 milling tool HSK F63 Place pickup for saw blade 350 mm 25 spindles drilling unit (19 vertical, 2+4 horizontal, grooving saw) Laser projection for positioning of suction cup clamp to show the contour to be milled program in WOODWOP Chip transport belt Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 9500 mm Width: 5000 mm Height: 3450 mm

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Predowcyd Ispfx Ab Iod Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 5 Psdpfxexyay Us Ab Ierd Movement X-Axis Movement 6000 mm Z-Axis Movement 380 mm Y-Axis Movement 1800 mm This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 350 mm, controller model: Woodwop 6, Equipment: chip conveyor, rotational speed infinitely variable, Homag BOF311 Profiline, Year 2006 Fully functional and currently still in operation. Will be replaced at the end of January. 5-axis CNC machining center, table approx. 6100/1350 mm Heavy-duty fork head design 18-position disc tool changer Additional 1 pickup slot for saw blade Scope of delivery includes: - 50 pcs. 100 mm plastic suction cups - 10 pcs. 150 mm aluminum suction cups - 4 pcs. single horizontal clamps - 4 pcs. quadruple horizontal clamps (custom-made) - 4 pcs. vertical aluminum clamps - 3 pcs. round vertical aluminum clamps (almost new) - Various spare parts - WoodWop package incl. 1x AV - Large touch bell (Arminius) - Vacuum claw pump 290 cbm (year 2017) Prjdpfx Abexy Izge Isd - Inclined conveyor - Laser can be purchased at an additional price

Condition: used, Year of construction: 2005, operating hours: 31,690 h, functionality: fully functional, machine/vehicle number: 0-201-10-2035, table load: 500 kg, Main technical data: Model: BOF 611 / 34 / 13 / 2R — CNC machining center with 3 working axes Spindle power: 15 kW, HSK 63 system Working dimensions: X axis: 3,740 mm (single table mode) / 1,830 mm (pendulum operation) Y axis: 1,550 mm Z axis: 300 mm Prsdpfx Absw Ilvfo Ijd Material feeding options: - Gantry feeder (HOMAG OPTIMAT) - Double work table — allows alternate or parallel operation Additional features: Tool changer: 12 positions Control and software: Flex5 interface and WoodWOP (e.g., version 6.0) for CNC programming Weight and construction: Weight: approx. 25,000 lb (~11,340 kg) Dual matrix table system (each 5 × 6 ft) Summary: The HOMAG Optimat BOF 611 is an advanced CNC machining center for woodworking, equipped with a powerful 15 kW HSK 63 spindle and three controlled axes. Ideal for precise milling, drilling, and large-format workpiece machining, with automated feeder (not included) and a dual table system for increased productivity. Buyer requirements: - Dismantle and prepare the machine for transport - Load the machine onto a truck - Arrange transportation from the seller’s location to the buyer’s location - Organize transport insurance if required The machine can be viewed under power/in current (working) conditions. It is still in daily use. For visits or a video call, please contact us.

Condition: good (used), Year of construction: 2008, functionality: fully functional, 4-axis machining center Homag Optimat BOF 311 venture 15 XXL New spindle Machine in excellent condition Can be inspected in department 14 Dismantling, loading and transport at buyer's expense Pjdpfx Ajw A R D Eob Ijrd

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0-201-22-4204, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,150 mm, workpiece height (max.): 80 mm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 1,000 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle with C axis Podpfx Abexdxg Ij Isrd

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-15-4101, travel distance X-axis: 535 mm, travel distance Y-axis: 535 mm, travel distance Z-axis: 535 mm, spindle speed (max.): 24,000 rpm, tool diameter: 280 mm, Equipment: chip conveyor, 5-Axis Machining Center with Chip Conveyor! Bidding obligates the buyer to collect the item by 14.10.2025 at the latest! TECHNICAL DETAILS Travel paths Travel range X-axis: 535 mm Travel range Y-axis: 535 mm Travel range Z-axis: 535 mm Feed speed X/Y direction: up to 60 m/min Feed speed Z direction: 30 m/min Spindle Head Spindle power: 12 kW Spindle speed: 1,500 - 24,000 rpm C-axis swivel range: -220 - +220 ° A-axis swivel range: ° Coolant temperature: 15 - 45 °C Tool Magazine Tool holder: HSK-F63 Interface: HOMAG Interface 9-002-04-3360 Number of tool positions: 18 Pitch circle diameter: 760 mm Max. total toolholder weight: 90 kg Max. weight per tool: 10 kg Tool diameter: 280 mm Max. tool height: 320 mm Clamping Cylinder Lower clamping plates: 70 × 90 mm Upper clamping plates: 77 × 100 mm Piston rod diameter: 25 mm Clamping height above console: 100 mm Lift – support cylinder: 55 mm Clamping force: 1,300 N Max. workpiece height: 80 mm Return: manual Drilling Unit with Slotting Tool Drill tool speed: max. 6,000 rpm C-axis swivel range: ± 360° Tool holder for drill tool (rotating): Ø 11.55 mm Tool holder for slotting tool (fixed): Ø 18.95 mm Weight (mounted): 3.5 kg Chip Conveyor Discharge height with incline conveyor: 1.3 m Discharge height without incline conveyor: 0.3 m Max. scrap piece size: 300 × 300 mm Podpfsxhgpfox Ab Iord EQUIPMENT Chip conveyor Eagle Eye laser projector 40 tools Numerous additional accessories

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Podpsvxxuxofx Ab Ierd Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Prjdpfxjr Ai Sqj Ab Ied Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: ready for operation (used), Technical characteristics BOF 611 / 34 / 13 / 2R 4 machining axes + A axis 15kW HSK 63 electrospindle Useful dimension in X : 3740 mm Useful dimension in Y : 1550 mm Useful dimension in Z : 300 mm With gantry feeder HOMAG OPTIMAT Double work table Drilling unit Automatic feeder for bar feeder Power and Motors Pluging: Three-phased Pjdpfx Aetqkaajb Ijrd Overall dimensions

Condition: good (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0-201-22-4227, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 30 m/min, workpiece length (max.): 4,800 mm, workpiece height (max.): 80 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 18, Equipment: rotational speed infinitely variable, Main spindle equipped with C axis and extension for Flex 5 aggregate. Working area X: 4800 mm. Working area Y: 1300 mm. Working area Z: 80 mm. 8 consoles. 1 vacuum pump. 18-position travelling tool changer. Tool holder HSK 63. Adapter - horizontal boring head with 4 fixed spindles. Boring head with 17 spindles. Additional spindle with collet chuck. Measuring probe. Central automatic oil lubrication. Lifting rails for console table. Pedpfx Aexdxa Iob Iord

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Prodsfg Ewzopfx Ab Isd Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,740 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Number of axes: 4 processing axes + A-axis Spindle power: 15 kW Model: HSK F63 Working surface In X (single processing, workpiece length): 3,740 mm In X (pendulum processing, workpiece length): 1,830 mm In Y (workpiece width): 1,550 mm In Z (workpiece thickness): 300 mm Work tables: Double Use of tables: simultaneous or alternating Feeding system Model: HOMAG OPTIMAT TBP 370 gantry loader Type of feeding: Automatic panel feeding through spreader beam Usable dimensions: Panel width: 400 - 1,600 mm Prsdpfx Abevwatys Iod Panel length: 400 - 2,000 mm Panel thickness: 16 - 36 mm Maximum panel weight: 60 kg Drilling group Total number of spindles: 16 Number of vertical spindles: 12 Number of horizontal spindles: 2 + 2 Tool magazine Turret: 12 positions

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm Podpfx Ajxxal Ieb Ierd UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Adjustable panel support rails for suction cup positioning Podoxx Nnxjpfx Ab Iord Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Automatic lubrication system Vacuum pump

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The machines are in very good condition. They are almost like new, hardly used at all. They were assembled for a period of time and then dismantled. Price is negotiable. Pedpexun Amofx Ab Isrd

Condition: used, Year of construction: 2017, Worktable: X=3100 mm Y=1250 mm (front stop) Y=1415 mm (rear stop) Z=160 mm (thickness) Z=260 mm (clearance height without vacuum cups) Processing spindle 10 kW DRIVE5CS Cardanic 5-axis head for milling, drilling, and sawing Drilling unit V21 High Speed 7500 incl. quick change system and spindle locking Vertical drilling unit Grooving saw automatically swivels 90° Drilling unit H6X Horizontal drilling unit with 6 spindles Drilling unit H4Y Horizontal drilling unit with 4 spindles Tool changer magazine 14 positions at the rear Linear changer fixed laterally, 7 positions Vacuum connection for templates Split vacuum system for pendulum operation (Field A/B) woodWOP Powercontrol with Powertouch Prodpfx Aexz Hnhsb Ijd Storage location: Customer

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Podpfoxw T H Nox Ab Isrd Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking