Used Hone for sale (232)

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Dcodsxzg Ubopfx Aa Nog Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Dedotqpd Hspfx Aa Njcg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZBF02, Equipment: Android Auto, CE marking, The production line can widely used to filling,capping and labeling for various semi-liquid,ointment paste, dense catsup and various materials with granule, such as drinks with fruit, honey,syrup,jam, peanut butter, sesame paste,tomato sauce, peper sauce, etc.Operating principle By the reciprocating motion of the pistons in the material cylinders of the Filling Machine, negative pressure produces in the front chamber of the cylinder so that material could be pumped. The stroke of the cylinder is controlled by a signal valve so as to adjust filing amount and to achieve accurate filling results.Property The Filling Machine with extra functions is designed and manufactured by our factory with reference to the same kind of foreign machines. Dodpfx Aexunctsa Necg

Year of construction: 2022, condition: new, -Power 1,5/2.3kw -Air pressure 6 bar -Number of drills 6 -Working piece length 100-480mm -Production capacity 500-1000 pcs/h -Optional saw can be added Dodpfxsh Hxzts Aa Njcg

Condition: new, Year of construction: 2023, JS-BSTR 350 is two side milling machine for profiling side bars on honey bee frame . It has charger magazine , 3 spindles . Engine power 3x1,5 kw, 1x0,75kw Minimum working length 100mm Max working length 320mm Dodpfx Aajh Hxw No Nocg Adjustable working width 35-38mm Production speed 500-1000 pcs/h

Condition: like new (used), functionality: fully functional, 1.) 2 pcs. Yealink MP56 E2 MSFT IP phones with Yealink EXP50 color LCD expansion module 140€/pc. Dcjdpjxxn S Njfx Aa Nsg 2.) 15 pcs. Yealink MSFT Teams Edition MP45 MP45 USB phone 40€/pc.

Condition: used, 1) 8 pcs. Dialog 4222 with extension display, black, €50/pc. Dodpfxowituao Aa Nocg 2) 2 pcs. Dialog 4223 with extension display, black, €70/pc. 3) 2 pcs. Dialog 4223 with extension display, white, €70/pc.

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Dodpfxjpcibmj Aa Necg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. Dcodpfey Ndg Tsx Aa Nsg • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2002, operating hours: 3,875 h, spindle speed (max.): 10,000 rpm, total height: 2,950 mm, total width: 2,200 mm, overall weight: 9,000 kg, travel distance X-axis: 700 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, product length (max.): 2,650 mm, number of slots in tool magazine: 32, number of axes: 5, This 5-axis Quaser MV204U/10 was manufactured in 2002. It features an impressive XYZ travel of 700 x 590 x 400 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a 32-tool automatic tool changer and a Heidenhain iTNC530 control system. If you are looking to get high-quality machining capabilities, consider the Quaser MV204U/10 universal machining centre we have for sale. Contact us for further details. • Rotary axes: A ±110°, C 360° • Through-spindle coolant: 20 bar Technical Specification Taper Size BT 40 Dodpfxsy Nbg Do Aa Necg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 16,700 h, spindle speed (max.): 6,300 rpm, total height: 2,750 mm, overall weight: 10,200 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 16,000 W, product length (max.): 6,600 mm, table load: 600 kg, number of axes: 5, This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details. • Spindle torque: 475 Nm (40% DC) • Tool changer: 60 positions (chain magazine) • Rapid traverse (X/Y/Z): 50 m/min • Feed rate (X/Y/Z): 50,000 mm/min • Table: NC swivel rotary table (d 630 mm) • Swivel range: -45° to +30° • Cooling: 40 bar internal coolant supply (IKZ) through spindle center • Power consumption: 50 kVA • Defect: Transmission damage Djdpfoy I Aqusx Aa Necg Additional equipment • Chip conveyor: Scraper belt type, discharge height 956 mm Technical Specification Taper Size SK 40

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m. Dcjdsgv Abpspfx Aa Njg

Condition: ready for operation (used), Year of construction: 1989, operating hours: 38,800 h, spindle speed (max.): 4,000 rpm, total height: 15,100 mm, total width: 3,650 mm, overall weight: 2,995 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,500 W, product length (max.): 4,330 mm, tool weight: 15,000 g, number of axes: 3, This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details. • Main spindle drive power kW 22.5 • Tool interface ISO 50 • Tool clamping force kN 23 • Spindle speed range rpm 20–4000 • Spindle speed override % 80–120 • Feed rate X Y Z mm/min 1–4000 • Minimum programmable feed mm/min 0.01 • Rapid traverse m/min 10 • Feed and rapid override % 0–140 • Tool magazine capacity 36 • Tool holder ISO 7388 Type B • Max tool diameter mm 160/210 • Max tool diameter adjacent free mm 125 • Max tool length mm 400 • Max tool weight kg 15 • Compressed air approx bar 7 Dsdpfxsy Hizwj Aa Necg • Table size mm 980×1800 • T-slot spacing mm 100 • Max workpiece weight kg 3000 • Voltage V 220/380 • Frequency Hz 50 • Total connected load kVA 37.5 • Total load with coolant kVA 45.0 • Positioning resolution mm 0.001 • Last operational year 2025 • Condition ran until 2025 without notable issues • Documentation manuals available • Coolant system available functional • Tool changer/chain magazine not present/ included

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Dcsdey Hizqopfx Aa Neg Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Voltage V 220/380Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Dcjdpjvn Tg Iofx Aa Neg Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Dcsdpfju Thhrex Aa Nog Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h Dcedpovf E Avefx Aa Nog bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 34,062 h, spindle speed (max.): 10,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details. • Spindle type: Motor spindle without gearbox (Motorspindel ohne Getriebe) • Spindle speed ranges: • Operating mode 1: 0–10,000 rpm • Operating mode 2: 0–800 rpm Djdpfxey Egblj Aa Njcg • Operating mode 3: 0–5,000 rpm • Spindle performance: • 40% duty cycle: 44 kW / 288 Nm • 100% duty cycle: 32 kW / 187 Nm • Spindle hours: 34,062 h • Machine on hours: 79,252 h • Spindle: New spindle installed end of 2025 • Workpiece dimensions (max): Diameter 800 mm, height 600 mm • Feed force (X/Y/Z): 10 kN • Rapid traverse: 60 m/min • Tool magazine: Chain type (60 or 120 slots, per technical documentation) • Cooling units: Machine cooling 3.3 kW; cabinet cooling 1.0 kW • Delivery: January 2027 Additional equipment • Dual pallet changer system • Internal coolant supply (ICS) with 980 l tank and band filter • Clamping hydraulics • Infrared measuring probe Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Swivel head: B-axis, up to 18000 rpm; spindle interface HSK-A63; power 35 / 25 kW (40 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET Dcsdoy D Ilcepfx Aa Njg • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Dodpsy A Ip Eefx Aa Nocg Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Dcsdpox Rd Hpofx Aa Neg Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 3, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm Dcjdpfsy Al Ufex Aa Neg • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 18,000 rpm, overall weight: 4,500 kg, travel distance X-axis: 7,200 mm, number of axes: 4, This 4-axis SCHÜCO PBX AL was manufactured in 2008. It features a processing length of 7,200 mm and is designed for the machining of aluminum profiles, including double-bar processing and through-feed capability for longer profiles. The machine includes an automatic tool changer and clamping blocks for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the SCHÜCO PBX AL universal machining centre we have for sale. Contact us for further details. Dcedpfx Aasy Aaw Ie Nog • Axis configuration: 3-axis standard; optional 4th axis with A-axis upgrade • Processing length: 7,200 mm • Capabilities: • Processing of aluminum profiles (e.g., Royal S, Firestop II) • Double-bar processing across total length • Through-feed capability for longer profiles • Electrical: 400 V, 50 Hz, nominal current 23 A, power consumption 11 kW, back-up fuse 35 A • Pneumatics: 7 bar compressed air Additional equipment • Clamping blocks (3–4 VE suggested for AL model) • Automatic tool changer (included; visible in images)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 10,200 h, spindle speed (max.): 24,000 rpm, total height: 3,125 mm, total width: 22,000 mm, overall weight: 26,500 kg, travel distance X-axis: 8,500 mm, travel distance Y-axis: 740 mm, travel distance Z-axis: 1,120 mm, spindle motor power: 12,000 W, product length (max.): 7,170 mm, number of axes: 5, This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÜCO AS 100 universal machining centre we have for sale. Contact us for further details. Dcjdpsy Aawzsfx Aa Neg • Machine bed length: 9,000 mm • Max profile length: 7,500 mm • Machining units: 2 x 5-axis towers • Machining sides: 6-sided processing possible • Clamping units: 5 movable clamping blocks with independent drives • Saw blade diameter: 450 mm • Cutting angle: 90° (per cutting diagram) • Control: AS 100 control module (leased via SchüCal) • Software: SchüCal integration Additional equipment • Combined loading and unloading magazine • Barcode scanner (included); optional portable barcode scanner

Condition: ready for operation (used), Year of construction: 2000, operating hours: 38,515 h, spindle speed (max.): 10,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 426, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details. • Interference circle (Störkreis): 400 mm • Operation voltage: 400 V (3 phase, 50 Hz) • Control voltage: 24 V (DC) • Total nominal current: 63 A • Total power rating: 42 kVA • Spindle on: 38,515 hours • Axes in motion: 36,413 hours Dcsdpfxjyz Tygj Aa Nog Technical Specification Taper Size HSK 63