Used Horizontal Bender for sale (7,128)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 The machine is currently powered and available for immediate delivery. • P8 power supply, valued at 1500, was renewed in August 2024. • The spindle was repaired in 2017 and has since been used primarily in a single-shift operation, as we mainly produce individual parts and small series. Therefore, the machine has spent most of its time in setup mode. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 Gbjdoyt Nnpopfx Ap Deu • Configuration: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm * 500mm) • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring during pallet changes is likely damaged, resulting in oil leakage. We have temporarily resolved this by inserting a ball valve in between. We only need to open this when we change the pallets, which doesn't happen very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being switched off for an extended period. The procedure for restoring it is known. If you have any questions or require further information, please send us a message or call us.

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 260 mm, Equipment: CE marking, HESKA HES 260 metal band saw – robust band saw for metalworking For sale is a used HESKA HES 260 metal band saw. The machine is ideally suited for cutting steel, stainless steel, aluminum, and other metal profiles, tubes, and solid materials. The HESKA HES 260 is characterized by its solid construction, reliable technology, and versatile applications. Thanks to its horizontal design, it is ideal for workshops, blacksmith shops, metal fabrication companies, and general mechanical engineering. Technical data: Manufacturer: HESKA Model: HES 260 Machine number: 23244 11 Machine type: Horizontal metal band saw Cutting range round/square at 90°: 260 mm, at 45° 160 mm Miter: right/left Band speed: 15-90 m/min Saw band: approx. 3,660 × 27 × 0.9 mm Coolant system: available Drive: approx. 0.6/0.8 kW Godpfx Apezwlhfo Dsbu Operating voltage: 400 V Dimensions: approx. 2000 x 1000 x 1200 mm (L x W x H) Weight: approx. 650 kg

Condition: good (used), functionality: fully functional, controller manufacturer: Fanuc, controller model: 16m, table width: 1,140 mm, table height: 1,220 mm, table load: 2,000 kg, overall weight: 22,000 kg, FOR SALE: Niigata HN80C – Horizontal Machining Center (HMC) Looking for a heavy-duty, reliable, and precise Japanese machining center for demanding work? For sale is a high-quality Niigata HN80C horizontal machining center, ready for production! General Information Manufacturer: Niigata Engineering Co., Ltd. (Japan) Model: HN80C Type: Horizontal Machining Center (HMC) Control System: Fanuc 16iM, Machine Weight:20,000 kg (20 tons) Axes and Performance X-axis Travel (longitudinal): 1,530 mm Y-axis Travel (vertical): 1,220 mm Z-axis Travel (cross): 1,140 mm B-axis / Table Indexing: Full 4th axis (0.001°) / 360-degree indexing Table and Pallet Changer Pallet Size: 800 x 800 mm Max. Pallet Load: 2,000 kg Pallet System: Automatic Pallet Changer (APC) Spindle and Tooling Spindle Taper: ISO 50 / BT 50 / CAT 50 Spindle Speed: 20 – 4,500 RPM Spindle Motor Power: 30 kW Tool Magazine (ATC) Highlights / Why Choose the Niigata HN80C? Heavy-Duty Construction: Built for demanding and heavy machining with excellent vibration damping and long-term stability. High Capacity: Large ISO 50 / BT 50 spindle taper enables heavy depth of cut and high power utilization. Generous Work Envelope: Large X/Y/Z-axis travels allow efficient machining of large workpieces in a single setup. Reliable Fanuc Control: Industry-standard control system ensuring operational reliability, easy programming, and broad spare parts availability. Gbsdjz H I Tmjpfx Ap Dju Contact us for more details, inspection, or a quote!

Condition: used, Year of construction: 2007, operating hours: 30,271 h, functionality: fully functional, machine/vehicle number: 147, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,950 mm, controller manufacturer: Fanuc, controller model: 15i, total height: 4,500 mm, total length: 5,500 mm, total width: 6,500 mm, table load: 8,000 kg, rotational speed (max.): 4,000 rpm, overall weight: 40,000 kg, spindle speed (max.): 4,000 rpm, operating hours of spindle: 30,251 h, coolant supply: 70 bar, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Good used MITSUI SEIKI HU 150 A for sale - Fanuc 15i control - Knoll high-pressure system, 200 liters, 70 bar - Chip conveyor - Tool magazine, 120 positions, BT 50 - NC table, 0.001° accuracy - 2 pallets, 1500 x 1500 mm - Extended Z-axis - Machine can be inspected while powered on - Year of manufacture: 2007 - Linear scales in all axes Gjdpfx Asz Iyd Tsp Djbu

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: Gbodpfx Aoz H Tqdep Dsu * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: used, Year of construction: 1993, Used Machine Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm Godpez I Uffofx Ap Debu - Max. drilling depth: 150 mm - Precision indexing rail, 12 mm - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor: 1.5 kW - Speed: 2,800 rpm - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm Gbjdpfx Aeu Ickyop Dou flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, HUNING screw conveyors – 2 vertical and 2 horizontal conveyors with 3 pneumatic slide gates For sale are four used HUNING screw conveyors for biomass conveying, as well as three pneumatic slide gates. The conveyors feature shaftless screws, stainless steel tubes, and wear-resistant linings made of RCH 1000. Vertical conveyor HUNING SPV 300 – approx. 6 m • Base length approx. 5 m with approx. 1 m extension • Vertical conveying, conveying angle 90° • Drive power approx. 7.5 kW Vertical conveyor HUNING SPV 300 – approx. 8 m • Base length approx. 5 m with approx. 3 m extension • Vertical conveying, conveying angle 90° • Drive power approx. 7.5 kW Horizontal conveyor HUNING SPF 300 – approx. 7 m • Base length approx. 5 m with approx. 2 m extension • Horizontal conveying in tubular design • Drive power approx. 3 kW Horizontal conveyor HUNING SPF 300 – approx. 8 m • Base length approx. 5 m with approx. 3 m extension • Horizontal conveying in tubular design • Drive power approx. 3 kW Gsdpfx Aoz Infxsp Dobu Additionally included: 3 pneumatic slide gates Package price: €27,000 net Location: Diekirch, Luxembourg. Inspection possible by arrangement. Technical specifications according to the original manufacturer's documentation. The stated overall lengths are calculated from the base lengths and the added extensions. All measurements are approximate and can be verified on-site. Collection from the location. Dismantling, loading, and transport are the responsibility of the buyer.

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Godpfx Apsium Eue Debu Europe-wide delivery possible.

Condition: used, Year of construction: 1981, total length: 3,300 mm, total width: 1,100 mm, total height: 1,250 mm, Colour: Grey Empty weight: 2.500 kg Gsdpfoz Enywsx Ap Debu - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 14946 - Drive system: Conventional - Power [kW]: 7.5 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 312 - Distance between centres [mm]: 1600 - Bed width [mm]: 385 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 3300mm x 1100mm x 1250mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 500 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC MSX 501 Gbedpfx Apoz H I A Ue Dou WORKING CAPABILITIES: X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm B-axis rotation: 360° Rapid traverse speed X, Y, Z: 50 m/min TABLE: Number of pallets: 2 Table dimensions: 500 x 500 mm Maximum workpiece dimensions: Ø 800 x 1,000 mm Table load capacity: 500 kg SPINDLE: Tool holder taper: ISO 50 Maximum spindle speed: 8,000 rpm Machine configuration: •120-tool magazine •Spindle connection DIN 69871 ISO 50 •High-pressure system through the spindle, 70 bar, complete with tank and paper filter •Chip evacuator •Operating manuals and CE declaration Year of manufacture: 2004

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 600 mm table surface area 1360 x 590 mm Godpfjz Icr Tsx Ap Dsbu feed x-axis 30 - 30.000 mm/min feed y- axis 1200 mm/min Feed z- axis 1500 mm/min. stroke of the table 1200 mm spindle diameter 60 mm grinding wheel size 400 x 100 x 127 mm spindle speeds (infinitely variable) 1000 - 3500 U/min weight of the machine ca. 6,5 t dimensions of the machine ca. 4,10 x 3,70 x 2,85 m

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center (HMC) from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer: RILE RSP-MC+16.2, year of manufacture: 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer: Knoll 600K, coolant/lubricant processing with band filter, switch cabinet, separate cooling unit (manufacturer: BKW) Control: -Siemens 840D Gbodpfxez N Ewis Ap Dsu Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1 door) with partition, lighting fixture Contents: various machine accessories

Condition: used, Year of construction: 1998, Horizontal CNC Center REALMECA C300H Gedjz Nx Ihspfx Ap Dsbu Travel X: 320 mm Travel Y: 350 mm Travel Z: 250 mm Numerical Command: NUM 1060 Série II Cone: BT 40 Spindle rotation: from 100 à 6000 RPM Year of construction: 10/98 Maxi distance spindle nose/table: maxi 450 mm / mini 50 mm Tools store: 20 tools Threadings: Fast: maxi 10 m/min Work: 0 to 10 m/min Axe B: 10 RPM Equipped with: 2 palets 300 x 300 mm Voltage: 380 V Dimensions (L x W x H): 2450 x 1700 x 2400 mm Weight: 3,8 T

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Gbsdpfxez Ihnae Ap Dsu Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 Gsdpfsytcl Ijx Ap Dsbu - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, operating hours: 1,345 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: Fanuc, overall weight: 21,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, x-axis travel 1250 mm y-axis travel 1100 mm z-axis travel 1050 mm spindle speed range 8000 rpm spindle drive motor 30/22 kW pallet size 800 x 800 mm machine weight approx. 21 t machine dimensions approx. Gbodpfx Apjz H A S Ds Deu 5.0 x 8.0 x 4.0 m distance table / center of spindle 200 (100) - 1350 (1200) mm Torque 600 tool taper 50 SK b-axis 0.001 ° table – indexing 90° in 2.5 sec. Control unit CNC Manufacturer of control unit FANUC 31i A

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Godjzbt D Djpfx Ap Djbu Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 S/N 1591356 Year of manufacture: 2023

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: Gbjdpfx Aoz E Ddfop Dsu - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, nominal power (apparent): 61 kVA, controller manufacturer: Mazatrol, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 6,100 mm, total width: 3,500 mm, table width: 500 mm, table length: 500 mm, overall weight: 18,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 26,000 W, Equipment: chip conveyor, Dear Sir or Madam, Gbjdpfxjxf T Txe Ap Dju we are offering you a used CNC horizontal machining center "MAZAK" in good condition. Please refer to the attached file for details.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 72,887 h, functionality: fully functional, machine/vehicle number: 32-47220, Equipment: chip conveyor, The Heller MCH 250 is a robust, horizontal 4-axis machining center manufactured by the German machine tool manufacturer Gebr. Heller Maschinenfabrik GmbH. This CNC machine is specifically designed for highly productive single-piece and series production and is frequently used for machining aluminum and steel castings. Equipment: -Horizontal spindle, 2-position pallet changer with rotary table no. 1116, chip conveyor, coolant/lubricant treatment system (manufacturer Knoll, year 2007), cooling unit, tool change system, 2nd control panel -without SL. Control system: -Siemens 840D Accessories: Godpfx Ajz N Eykjp Dobu -Telescopic drawer cabinet, storage shelf, clamping device, step stool (3 steps)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure Gbedpfx Apeykpg Ho Dsu COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz Gedpfxjxwvr Ij Ap Dsbu # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle # Documentation: operating manuals only Machine condition: Operational / In production

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 Gjdpfoxwvlnex Ap Djbu # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Gedpfoxxifkjx Ap Dobu Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation