Used Long Bending Machine for sale (68,686)

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Todez Akgwopfx Airsd Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! Tedpfx Ao Ahg T Heirjd TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: Tjdpfx Asz Ny Rkoirsd o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Tsdpfo Af Utajx Aired Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for angle iron • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Tsdpfx Aiezc Uu Hored

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Usable length: 6200 mm Bending capacity steel 400 N/mm: 2.00 mm Stainless steel 600 N/mm: 1.50 mm Todpfjyxchnsx Airjd Aluminum 190 N/mm: 3.00 mm Number of uprights: 6 Driven bending joints: 6 Insertion depth: 1165 mm Connection: 400V/3Ph/50Hz Other data and dimensions: see brochure Includes hydraulic jaw adjustment to compensate for different sheet thicknesses Includes adjustable jaw preload Includes 2 hydraulic pressure stages Includes safety package Includes 10 x 60 mm, 2-piece bending jaw extension rail Includes 2-way foot switch for clamping jaw open/close + automatic bending jaw start Includes resettable sheet metal grid Includes water groove in the clamping jaw BMS Multi-Touch control with electronic depth stop TAZ 1000 With this Windows-based, graphical touchscreen control, profiles can be selected by simply tapping. The simulation program allows you to observe the complete bending process of a previously saved profile, as well as newly entered profiles. The depth stop is electronically driven via toothed belts and is equipped with four stop fingers. The fingers are infinitely adjustable along the entire machine length. Depth stop measuring range: 10/30 - 945 mm. Network connection for remote maintenance Electric cutting device S2 Cutting capacity: Steel 400 N/mm²: 2.00 mm Stainless steel 600 N/mm²: 1.25 mm Aluminum 190 N/mm²: 2.50 mm Includes optional conical depth stop for narrow/wide edges for easy joining of sheets Measuring range: 10/30 - 885 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 Tedpez R Rpbjfx Airsd • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Dimensions: cm 105 x 95 x h. 89 Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Tjdezgv Hdepfx Airsd Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: good (used), Year of construction: 2020, operating hours: 42 h, functionality: fully functional, machine/vehicle number: 220/831, overall weight: 550 kg, total length: 2,200 mm, total height: 1,900 mm, total width: 1,100 mm, table width: 250 mm, table height: 900 mm, space requirement height: 2,000 mm, space requirement width: 1,200 mm, space requirement length: 2,500 mm, type of input current: three-phase, input voltage: 460 V, Equipment: CE marking, emergency stop, We have a bending machine for sale. It has only been used for 42 hours and 31 minutes, as can be seen in the attached picture. It is in good condition and well-maintained. If you are interested and require further details, please call or send me an email. Tedpfe Afyq Usx Airjd

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender Todpfx Aswk Rlxsirod roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). Tsdoz Ix Ukopfx Airjd • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available Tedpfeyviwqox Airod - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl, in absolutely top condition! Device features: - Shear model: MSB 200 - Cutting capacity: see nameplate, up to 3mm steel – significantly more for aluminum - Working length: just over 2 meters - Manual back gauge: 500 mm - Side / angle gauge - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 meters - Sheet thickness (steel): 3 mm – significantly more for aluminum and zinc - The machine was used extremely rarely, approx. 1-2 times per month for thin sheets at a lamp manufacturer - It shows hardly any signs of use; this condition is rare - The total price is less than half the current new price – the price list is from last year! If you have any questions, feel free to call briefly. We have this set twice, as well as other models such as the Schechtl MAX 200 (2.5mm) or MA 200 (2mm). The current net new price for both machines can be seen in the photos. You will receive an invoice with VAT shown separately. I can arrange shipping by freight forwarder if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible by prior telephone arrangement. Payment in cash upon collection – if there is anything else I can do for you, please call me briefly – thank you. Tjdjwfzztspfx Airod Collection should take place within 8 days after the end of the auction. Item number:

Condition: used, sheet width 3000 mm Tjdpfo Ahkinsx Aired plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Tjdpfsz D Ippex Airod Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Tedpfx Asyw N H Uoired

Condition: used, Year of construction: 2008, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending radius (max.): 45 mm, overall weight: 180 kg, total length: 3,300 mm, total height: 1,150 mm, operating pressure: 125 bar, Equipment: documentation/manual, emergency stop, foot remote control, quick-change device, We are offering this used TRACTO-TECHNIK TB20D mandrel bending machine for sale. Serial number: TB20D 2110608 Year of manufacture: 2008 Todpfx Ao Abbmpeirsd For sale is a mandrel bending machine, type: Tracto-Technik Tubobend TB20D, 3000 mm, from its first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. It is fully operational and can be demonstrated under power upon prior arrangement. The TUBOBEND 20 mandrel bender is a pipe bending machine with a free bending head for processing pipes in all planes. It is designed for work involving adjustments according to drawings or samples, as well as for series production. With the TUBOBEND 20 mandrel bender, precision steel pipes according to DIN 2391/C, material St 35.4 NBK (hydraulic pipes), 6-16 mm diameter can be processed. The processing of other pipe qualities and dimensions is also possible. The mandrel system allows for the smallest technically feasible radii to be achieved. If required, a folding smoother can also be used. The bending unit is designed in such a way that even serpentine (meander) bends can be made. Dimensions: L x W x H in mm 920 x 720 x 1800 (without stop device) Machine lower part 630 x 550 x 700 Machine upper part 920 x 720 x 500 Weights: Total weight approx. 180 kg (without stop device) Machine lower part with hydraulic unit approx. 74 kg Safety device: - Emergency stop button: A central emergency stop button for the TUBOBEND 20 is located on the control panel. Safety cover with electrical shut-off in the hazard area of the bending arm. Description and overview: The TUBOBEND 20 mandrel bender is a small, mobile, compact pipe bending machine that can be easily disassembled into two main components for transport purposes. The bending head can be swivelled from the vertical to the horizontal position. The pipe feed length is 1500 or 3000 mm. Extensive scope of supply (a very large number of tools included!): An advantage of this offer is the extensive tool package, which is completely included in the price: see separate list. Documentation: Original operating manual is complete. EC Declaration of Conformity available. Note: The machine will only be sold as a complete package together with the complete set of tools according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a shipping company commissioned by him. Technical data according to available documents. Subject to prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Schneider, shaft diameter: 50 mm, bending force (max.): 10 t, overall weight: 2,200 kg, total length: 2,670 mm, total width: 1,650 mm, total height: 1,400 mm, input voltage: 380 V, input current: 24 A, type of input current: three-phase, Equipment: CE marking, documentation/manual, For sale: an INDUCTAFLEX AL-1e 4-roller CNC profile bending machine, purchased in 2021. It has been used very little and has only been switched on for a total of 100 hours over the years. It comes with a complete set of rollers, including a separate holder. INDUCTAFLEX AL-1e 4-roller CNC tube bender + tool set - Purchased in 2021 - CNC-controlled, 4-roller bending machine for aluminium profiles and tubes - Bending force: 10 t - Repeat positioning accuracy: 0.05 mm - Torque per roller: max. 2,500 Nm Tsdpfx As Afb Afsirjd - Shaft diameter: 50 mm - X-axis stroke: 200 mm - Dimensions: 1,650 × 2,670 × 1,400 mm - Weight: approx. 2,200 kg - Includes a tablet for training purposes - Tool set with holder - Located in Budapest, Hungary

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. Tjdjz Aiqzjpfx Airsd The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Todpfsytn E Tsx Aired Technical data on photo

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: D06L/7826, Offer Number: D06L/7826 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM50 Constr. year: 1968/2016 wire diameter range: 0,5 -5,0 mm width of band: max 70 mm feeding length: max 320 mm Tedpfx Aijwi S Ewjred output pieces/min: max 132 number of slides: 5 Location: In our warehouse

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: M961287, overall weight: 17,000 kg, Herber 127 CNC in very good condition. The control system has been upgraded to "WinBoHerber". Year of manufacture: 1996 Capacity: Ø 127 x 5 mm Radius: min./max. 80/400 mm Bending speed / repeatability: 40°/s; ±0.1° Mandrel length: 4,000 mm Weight: 16,000 kg Machine dimensions: 7.0 x 2.2 x 1.8 m Motor: 40 kW Todpo Aax Uzjfx Airjd Longitudinal feed: 900 mm/s Tolerance range: 0.05–0.1°/mm Tools are also included in the scope of delivery. Ø 50, radius 101.6 mm, folding smoother. On request, we also offer installation and training.

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking Tjdpfoz S Afpox Airsd -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Inspection and demonstration possible by appointment. Tedpjyr H A Iofx Airjd

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Tedpfx As Agu D Eoired Pipe length: 4 meters Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Round 54, radius 108