Used Horizontal Broaching Machine for sale (65,664)

Condition: new, pressure 80.0 t Kwodpfx Adsxabhaewet stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l Kwjdpfx Ajxabhmsdwet weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, bending radius min. 190 mm square edge steel 20 x 20 mm flat steel 100 x 7 mm round bar steel 22,0 mm L-beam 100 x 10 mm range L-W-H 900 x 430 x 310 mm weight of the machine ca. 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop Kjdpfxjxcuyhs Adwswt - Ideal for repair shops and locksmiths scope of delivery - Bending plate - Stepless angle stop - Terminal block with eccentric clamp - Material stop

Condition: used, Year of construction: 2012, pressure capacity max. 10.0 t bending capacity - flat iron ca. 100 x 12 mm stroke 0 - 150 mm dayligth ca. 100 mm assembly distance ca. 200 mm print area 0 - 100 kN stroke speed max. 0.6 m/min table surface area 1000 x 600 mm Kodpfx Asxaa Iledwswt work height max. 845 mm operating pressure max. 260 bar engine output 1.1 kW weight 400 kg range L-W-H 1100 x 800 x 1000 mm Equipment: - Robust electro-hydraulic horizontal bending machine - Large worktable (1000 x 600 mm) - Hydro-mechanical stroke limiter - Continuously adjustable punch stroke - Side-mounted, one-handed operation - 1x bending tool set * Reversible die with 80/50/40 mm opening - Control cabinet - front

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm bending radius min. 190 mm round bar steel 18,0 mm weight of the machine ca. 33,0 kg. Characteristics : - For precise cold and hot bending of flat, round and square steel Kedpoxcux Rsfx Adwowt - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, Mitsui Seiki HU40A (2005) is a high-precision horizontal machining center: Kwedpewwrw Njfx Adwst * axis travel: 560 × 560 × 560 mm, * spindle: 12,000 rpm, power 11–15 kW, BT40 taper, * tool magazine with 60–220 positions, * new FANUC CNC systems, * large workspace and cooling system, * chip conveyor.

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm Kwjdpsx Sq Uvefx Adwet B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Ksdpoyazc Ssfx Adwswt Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.

Condition: used, Year of construction: 2009, total height: 2,900 mm, Empty weight: 14.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-31 - Details: - └ Description: Excluding tools - Year: 2009 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Parts book, User manual - └ Language: NL, DE - └ Type: Hardcopy - CE certificate present: No - Serial number: 113253 - Number of milling spindles [pcs.]: 1 - Drilling unit present: Yes - Tool changer positions [pcs.]: 24 - Table length [mm]: 4500 - Working range X [mm]: 4500 - Working range Y [mm]: 260 Kedsx Dil Ijpfx Adwswt - Z-axis working range [mm]: 150 - Voltage [V]: 400 - Current consumption [A]: 63 - Fuse [A]: 80 - Power [kW]: 32.0 - Transport weight [kg]: 14000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 - └ Vertical drilling spindles [pcs.]: 6 Kwjdpfexbzg Ejx Adwet - Tool changer positions [pcs.]: 14 - System/software: Xilog plus - Safety feature: Bumper guard - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Travels X-axis: approx. 800 mm Y-axis: approx. 410 mm Z-axis: approx. 510 mm Table Table size: approx. 1100 × 450 mm Max. table load: approx. 700 kg Spindle Spindle taper: BT40 Kodpfoycibzox Adwjwt Max. spindle speed: approx. 8,000 rpm Spindle motor power: approx. 7.5 kW Tool Changer Automatic Tool Changer (ATC): 20–30 tools (depending on configuration) Feed Rates Rapid traverse: approx. 20 m/min (X/Y), 15 m/min (Z) Machine Weight Approx. weight: 5.5–6.5 tons

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) Kjdpfox Iputsx Adwewt -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Kjdpfx Adsx Rhlcowswt Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. Kedpfsu U Hvwex Adwowt The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: excellent (used), Year of construction: 1999, CNC horizontal machining center DECKEL MAHO DMC 60 H SIEMENS CONTROL Year of manufacture: 1999 Technical data: X-axis: 600mm Y-axis: 560mm Z-axis: 560mm B-axis: 360° Pallet: Number: 2 Ksdpfovn Ra Sox Adwjwt Size: 400x500mm Permissible load: 600kg Weight: 10,500kg

Condition: excellent (used), Year of construction: 2005, TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Kjdpfexywtlox Adwswt Control Powered Hours: 112,997 h

Condition: excellent (used), Year of construction: 2008, CNC Horizontal Machining Center MAZAK HCN 5000 II Year of manufacture: 2008/10 Tool magazine: 40 tools Spindle speed: 18,000 rpm NC rotary table (fourth axis / 0.001 x 360,000 positions) Technical Specifications: Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Distance from spindle center to pallet center, min.: 70 mm Distance from spindle center to pallet center, max.: 810 mm Distance from spindle center to pallet surface, min.: 100 mm Distance from spindle center to pallet surface, max.: 830 mm Kodpfx Adox Hgh Iewswt Tool holder: SK40 Tool magazine: 40 tools Spindle speed: 18,000 rpm Pallet working area: 500 x 500 mm NC rotary table (fourth axis / 0.001 x 360,000 positions)

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Ksdpfxsx Trmcj Adwswt Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm Kedpfx Aeizxbiodwowt - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, General Data Measurements width 4000 mm Measurements depth 6000 mm Measurements height 2500 mm Machine weight 10600 kg Control Unit Brand Siemens Model Sinumerik 840D Main Drive Number of axis 4 Kodpfsx I S Shjx Adwewt Movement X-Axis Movement 560 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Media Internal cooling Yes Additional Equipment 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree Workpiece probe Internal cooling Large coolant tank with automatically coated filter paper This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156592, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 171, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X/Y/Z: 1,000 x 900 x 1,000 mm Kwsdpfxswu Epaj Adwot Pallet size: 630 x 630 mm Number of pallets: 2 Max. workpiece size: 1,000 mm diameter x 1,000 mm height Max. workpiece weight: 1,200 kg Spindle power: 40 HP Spindle speed: 6,000 rpm Tool magazine: 171 positions Spindle taper: DIN50 EQUIPMENT - Coolant supply through spindle - Chip conveyor

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Kedpfxsx N Ndde Adwewt Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Year of construction: 1994, condition: used, Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer's data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats - A mini : 20mm - A maxi : 85mm - B mini : 12mm - B maxi : 60mm - C mini : 50mm - C maxi : 170mm Kwsdpfx Aox R D A Rjdwjt Carton feeding: suction cup picking Product feed belt: cell chain Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 2350 Measurements depth 3150 mm Kodex D Sqyspfx Adwowt Measurements height 2180 mm Machine weight 10500 kg Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Number of axis 9 This 9-axis FASSLER HMX 400 horizontal honing machine was manufactured in 2005. It features a comprehensive control system with Sinumerik 840 D, ensuring precision and ease of use. With a honing stone diameter of 400 mm and a machinable workpiece diameter up to 350 mm, it is ideal for both external and internal honing. Consider the opportunity to buy this FASSLER HMX 400 horizontal honing machine. Contact us for more information about this machine. Application Types Honing

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 5585 mm Kwedpfxex D Ib Io Adwet Measurements depth 3080 mm Measurements height 3280 mm Machine weight 21000 kg Control Unit Model OSP-E100M Brand OKUMA Main Drive Spindle speed range 20000 rpm Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 900 mm Z-Axis Movement 980 mm Media Internal cooling Yes This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us. Application Types Milling