Horizontal machining center DOOSAN

DOOSAN HM 630

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Ncjdpfx Adjwq Dpqjwel Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nodpfx Adsd E A I Iewjcl Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Nedpfx Adow Rl S Sswecl Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Nsdpfou Dm E Hox Adwecl Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Ncodpfxjtqtk As Adwjl Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm Nodpfx Aedhhpredwscl weight: 3500 kg

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 Nodew Rn R Rspfx Adwocl - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 - Coolant device

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 Nedpfxotltl Ho Adwjcl CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Ncjdpeia Rtdsfx Adwel Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Ncjdpfxsxn Svdj Adwjl Coolant pump Barfeeder interface