Used Horizontal Shaping Machine for sale (66,492)

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm Nksdpfjxx A Dmex Ah Rew table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Condition: used, Year of construction: 2021, controller manufacturer: Sonstige, controller model: Professional 6, _____ Description: Year of manuf. : 2021 Control : Sonstige Professional 6 Speed : 14000 rpm Movement X/Y/Z : 730/650/800 mm Tool holder : HSK-A63 Nedsymhx Hepfx Ah Rskw Spindle: Speed:14.000 U/min Torque (max.):303 Nm Taper:HSK-A63 NC-Roundtable: B-Axis:0,0001° Palletsize:500 x 500 mm Tableloading (max.):500 kg Workpiecedimensions (max.):ø800 x 1.000 mm In general: Toolmagazine:60 Stations Rapid travers in X/Y/Z:60 m/min Ausstattung/Zubehör: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfitler and High-pressure, 70 bar Automation:Palletchanger, 2 Stations Workpiececlamping:Hydraulic, 6+3 Contactcontrol:Penumatic Oilmistseparation:Mechanical extraction, SARA UC1 SD III Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, nominal power (apparent): 49 kVA, controller manufacturer: Okuma, controller model: OSP-P200M, table width: 400 mm, table length: 400 mm, table load: 400 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 58,000 h, coolant supply: 60 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained 3-axis Okuma MA-400HA horizontal machining center for sale. Nedjyvga Uopfx Ah Rskw The Z-axis module needs to be overhauled. If more than 30% of maximum rapid traverse speed is selected, the axis does not move. The machine is still in daily production and can be inspected at any time. The machine is sold including: - 100 SK tool holders (without tools) - Renishaw OMP60 measuring system including probe and receiver - 60 bar internal coolant supply - 6 pallets including fixtures for machining round parts. Minimum fixture diameter 160mm, maximum fixture diameter 370mm - Mayfran Consep 2000 II chip conveyor

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm Nkedpfsx D Dtasx Ah Rsw This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 horizontal machining center Max spindle speed: 7000 rpm Including spindle cooling Z-880 Nkjdpsyvf Ttsfx Ah Rew X-1050 Y-800 Tool magazine for 80 tools 1 spindle, 2 pallets, 500x500 mm cubes, 4-axis (x-z-y-b)

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm Nedpfxoxh Rulj Ah Rokw 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: used, Year of construction: 1991, x-travel 710 mm y-travel 510 mm z-travel 510 mm Nodpjyutp Tofx Ah Rskw Control Mazatrol M 32 size of pallet 500x500 mm spindle taper ISO 40 turning speeds 50-10000 U/min Spindle capacity 7,35 KW tool magazin: 60 numbers of pallets 6 weight of the machine ca. 8,5 t Accessories: Screw conveyorThe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 63 m/min, rapid traverse Y-axis: 63 m/min, rapid traverse Z-axis: 63 m/min, nominal power (apparent): 48 kVA, controller manufacturer: Fanuc, controller model: F31i-B Plus, workpiece height (max.): 1,150 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 500 mm, table load: 700 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, spindle nose: BT40, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, Machine Technical Specifications: Travels: X: 760mm Y: 760 mm Z: 800 mm Table: 500x500mm Load capacity: 700kg Workpiece dimensions: Ø 800 x 1150mm (depending on workpiece shape) Taper: BT40 (dual contact) Spindle power: 37/26/18.5 kW Maximum speed: 15,000 rpm Controller: FANUC 31i 5Plus Tool magazine slots: 60 Max. tool length: 550mm Max. tool diameter: 95mm (170mm with no tools in adjoining pockets) Max. tool weight: 12kg Machine dimensions: 4605 x 2750 x 3605 mm (L x W x H) Weight: 10,500kg Nodpfx Ahsytfnxo Rokw Additional equipment: CTS (Coolant Through-Spindle) preparation High-pressure unit (70 bar) Tool breakage detection in magazine (contact type) Lift-up chip conveyor – scraper type with drum filter & floor magnet (Type E) Soft AC Coolant shower gun (medium pressure)

Condition: excellent (used), The machine is in good condition and can be tested at our warehouse. Nkodoyuy Dqjpfx Ah Rsw

Condition: excellent (used), Year of construction: 2022, x-axis 550 mm Nkedjxxmmfjpfx Ah Rjw y-axis 450 mm z-axis 375 mm control SIEMENS 840D SL spindle turning speed range 1-17.500 U/min weight of the machine ca. 10 t dimensions of the machine ca. H 6,30 x 3,85 x 3,70 m The machine is designed for friction stir welding. Reinforced Z-axis (5000 N) required for the welding process. Spindle speed increased to 1-17,500 rpm. including swivel axis Operating hours: approx. 11,111 h. Spindle running time: approx. 4,116 h.

Condition: ready for operation (used), Year of construction: 1999, For sale Heller MCP-H 460 HS Unipro controller Horizontal 4 axis machine center with direct drive spindle Working range X 2000mm Nodsyw Rwzepfx Ah Rokw Y 1400mm Z 1250mm Thermo-symmetric gantry column design Pallet system designed for high performance/ production Manufactured 1998 Currently in production, being decommissioned very soon Additional tool carriage at rear to standard one also controlled with a separate unipro controller Please feel free to contact if you require any additional information

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm Nkjdpfxjvzhf So Ah Rsw max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Nksdpfxew Rf S Es Ah Rsw Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN Nksdpfxew Rf R Uo Ah Rew power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 2015, Twin-spindle machining center – 4 axes Nkedpfxsycqp Hs Ah Row Travels x/y/z = 400 x 500 x 425 mm 2 x swivel axes Tool magazine: 2 x 36 positions Tool holder: HSK 63 Spindle speed up to 17,500 rpm Siemens 840D Chip conveyor Coolant system

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: A.1003260.01, Machine designation: Machining center Manufacturer: Hueller Hille Model: NBH230 Year built: 2009 Serial number: A.1003260.01 Control: Sinumerik 840D Travel paths: X-axis: 1200 Y-axis: 800 Z-axis: 1200 Tool holder: HSK100 Spindle speed: 10000 rpm Feed (X-Y-Z axis): 1-60000 mm/min Rapid traverse (X-Y-Z axis): 60m/min Rapid traverse (B-axis): 15 rpm Tool palette: 630x800mm NC rotary table: 0.001 deg Tool magazine: 3 cassettes of 50 tools each Measuring system: Direct with incremental scale Position uncertainty: 0.007mm Nkodswpi Ucjpfx Ah Rjw Position deviation: 0.004mm Tool change time: 2.5-4.5 sec Chip-to-chip time: approx. 6.2 sec Pallet change time: 14.5 - 17 sec Connected load: 69 kW Compressed air system: 5 bar Coolant system: approx. 1250l Chip conveyor with inclined discharge: 1200 mm height

Condition: used, Year of construction: 2011, groove width 22 mm drawing length 1200 mm working speed 0 - 3,7 m/min drawing capacity 4 t Nodpfsymqd Eox Ah Rokw surface area Ø350 mm voltage 400 V total power requirement 5,5 KW weight of the machine ca. 550 kg dimensions of the machine ca. 3,90 x 0,65 x 1,20 m - Serial No.: 11-6160 incl. complete set of broaching tools Width 3,4,5,6,8,10 and 12 mm Tolerance JS9

Condition: used, Year of construction: 2007, (2007) Matsuura HPlus 300 PC11 CNC Horizontal Pallet Changing Machining Centre With Matsuura G-Tech 30i Contro Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=560mm, 'Z'=500mm, 'B'=0-360° (0.001° Increment). Distance Spindle Nose To Table 80-640 mm. Rapid Traverse 'XYZ'=60,000mm/min, 'B'=100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT 40. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950 (2007). Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). Njdpfx Ahsyw Thcj Rjkw With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Quantity Of Pallets With Tombstones, Spin Window, Hand Wheel, Signal Tower, Full Manuals, Tool Holders, Back Up CD/USB & Maintenance Records. New Spindle 18 Months ago at a cost of £20,000. Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice).

Condition: good (used), Year of construction: 2014, functionality: fully functional, number of spindles: 1, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical specification: - Horizontal spindle Nkedpfx Ahoyrfxhs Rew - Spindle HSK-A63 - Spindle torque 240 Nm (to be confirmed) - 4-axis machining - ATC for 60 tools - Pallet changer (2 pallets) - Pallet size 500x500 mm - Coolant chiller - Coolant filtration system by Knoll - Coolant pressure 50 bar through spindle - Fanuc control system - Chip conveyor - Robot interface - Linear measuring systems (scales) - Manufactured in 2014

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 mm gear width 72 mm max. module 6 Control Siemens 840 D swing diameter 350 mm dia. of shaper cutter 125 mm x-axis 230 mm y-axis +/- 25 mm Nkodpeymqw Sofx Ah Rew z-axis 250 mm stroke length max. 80 mm column swivelling 0 - 12 Grad no. of strokes 80 - 800 Hub/min total power requirement 44 kW weight of the machine ca. 11,5 t dimensions of the machine ca. 4,2 x 4,0 x 3,3 m Very nice condition!

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 Horizontal Machining Center Spindle cooling Maximum spindle speed: 7000 rpm Z- 1000 mm X- 1300 mm Nsdpoyuyfhjfx Ah Rokw Y- 1100 mm Tool magazine for 80 tools 1 spindle, 2 pallets, 800x800 mm cubes, x-z-y-b, 4-axis

Condition: excellent (used), Year of construction: 2013, 1. Automatic Profiling Planer Weinig Powermat 600 - Net price: €68,800 Technical Data: • Year of manufacture: 2013 • Working width (with cutting circle 93 – 125 mm): 20 – 230 mm • Working height (with cutting circle 93 – 125 mm): 10 – 120 mm • 7 spindles: - First bottom horizontal spindle Nkodpfx Ahoytd S Ns Row Motor: 5.5 kW (7.5 HP) - First right vertical spindle Shared motor with first left vertical spindle: 11 kW (15 HP) - First left vertical spindle Shared motor with first right vertical spindle - First top horizontal spindle Motor: 7.5 kW (10 HP) - Second top horizontal spindle Motor: 7.5 kW (10 HP) - Second bottom horizontal spindle Motor: 5.5 kW (7.5 HP) - 7th universal spindle Motor: 5.5 kW (7.5 HP) • Electronic feed drive with brake, stepless adjustment 5 – 30 m/min Motor: 4 kW (5.5 HP) • Operating voltage: 400 V (voltage range 380 – 420 V), 50 Hz • All spindle motors in IE2 design • All spindles with high-precision rotational accuracy • Standard PowerLock fitting • Additional set of spacer rings, installation length 170 mm, diameter 40 mm • Joiner table 2 m long (incl. longitudinal fence) • Marathon Coating for machine table and fences • Special coating for protection of table segments and fences against excessive wear. Recommended for processing abrasive materials (e.g. tropical wood, MDF, chipboard). 2. Weinig Rondamat 960 Powerlock - Automatic Knife Grinder - Net price: €15,300 Weinig Rondamat 960 Powerlock (Automatic Straight Knife and Profile Knife Grinder) Specification: • Weinig Rondamat 960 Powerlock / HSK profile grinder • High-precision knife grinder for sharpening straight knives and profiling using templates • Sharpening of straight knives in cutter block; manual grinding for profile and straight knives • Grinding wheel diameter min./max.: 150 mm / 225 mm • Grinding wheel width: ceramic 5 mm, borazon 10 mm • Grinding wheel bore: 60 mm • Tool diameter min./max.: 100 mm / 300 mm • Max. tool width: 240 mm • Grinding wheel drive: 1.1 kW • Spindle speed: 1700/2000/2400/3000 rpm • Relief angle: Radial (back): 10–30°, Axial: 0–20° • For rotary heads up to 60° • Coolant tank approx. 50 L • Table feed 0–240 mm • Electrical connection approx. 2 kW • Option: PowerLock System – for grinding PowerLock tools • HSK manual quick-release tool holder • Radial table clamping with precision adjustment • Max. tool width: 240 mm 3. WEINIG OptiControl 970095 Tool Measuring Station - Net price: €7,650 Specifications: • Min. tool diameter: 90 mm • Max. tool diameter: 300 mm • Tool length: 0–240 mm • Radial measuring range (radius): 150 mm • Contactless measurement of tool dimensions, radius (R), and height (H) with display on electronic digital readouts • Electronic digital displays show radius and tool height • HSK63 tool holder for PowerLock tools • NEW: PowerLock HSK63 adapter, mandrel D=50 x 260 mm 4. Weinig Template Maker Isel 3020 Copy Router - Net price: €1,700 Applications: • Profile milling • Manufacturing of tool templates for further processing on machines such as Weinig Rondamat 5. POWERLOCK Milling Cutters/Heads - Price: €7,500 Two cabinets filled with various Powerlock milling heads for different applications, approx. 45 pcs.

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min Nodpfxoxylm He Ah Rokw - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg Nkjdpfx Ahjxxvtuo Rjw # Tool change time: 3 s Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: Njdpfx Asxxrnbeh Rskw # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.