Used Hot Chocolate Machine for sale (91,521)

Condition: good (used), Loypack One shot chocolate depositor Hjdemqm E Uspfx Adwjfb Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: good (used), Loypack One shot chocolate depositor Hsdpsmqm E Rsfx Adwjfb Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Hfodjwq Suuspfx Adwjb Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Hjdoum Hufspfx Adwefb Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine Hfjdpfx Adox N D Ttowob This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Hjdpfxswl Iw Us Adwsfb

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm Hjdpfx Aj Syv Tjdwsfb cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler

Condition: excellent (used), functionality: fully functional, power: 2 kW (2.72 HP), DGUV certified until: 12/2026, Chocolate Enrobing Machine IKM 305 Enrobing machine IKM Model: 305 with chocolate wheel for all types of pastries and cakes wire belt width: 305 mm belt speed infinitely adjustable bottom dipper, blower mobile machine, stainless steel construction connection: 220 V dimensions approx.: 1200 x 750 x 1400 mm, W x D x H used machine, cleaned Option: - Maintenance contract - Delivery service - Service package - Training & commissioning Hfjdjxmrchopfx Adwob Enter the world of bakery machines with us!

Year of construction: 2009, condition: used, MADAG DP H120 Hot Stamping Machine • Year of manufacture: 2009 • Pre-owned and fully functional machine • Manufacturer: MADAG (Model DP H120) • Application: Stamping • Optional: Inspection and demonstration available upon request Hodpfxjxy Ra Eo Adwjfb ___ Our General Terms and Conditions apply. The seller is not liable for typographical errors or data transmission mistakes. All information and images were provided by the owner and authorized for publication. The visual condition of the items corresponds to their age and the photos shown. The technical condition and wear of the items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 1988, functionality: fully functional, • Machine type: Tire building machine • Configuration: Tire building machine with (3) hot knives • Model designation: BRC III R1 E84 Manufacturer • Manufacturer: The Goodyear Tire & Rubber Co. • Production site: Goodyear S.A. – Mold Plant • Country of manufacture: Luxembourg (as stated on the nameplates) Identification (visible) • Model: BRC III R1 E84 • Serial number: 21553 • Date of manufacture: June 1988 Included units • Number of hot knife cutting machines: 3 • Type: Hot knife cutting machine • Manufacturer (cutting machines): The Goodyear Tire & Rubber Co. • Production plant: Goodyear S.A. – Mold Plant Hodpex I Ea Ssfx Adwsfb Mechanical configuration (visible only) • Inline tire building machine • Multiple roller conveyor sections • Tire building drum station with circular frame • Hydraulic unit with pumps, valves, and pressure gauges • Floor-mounted steel machine base • Fixed yellow safety guard and wire mesh fencing

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h Hedex N D Tgepfx Adwsfb This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: Hedpsxg Hzfofx Adwefb 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Other Features: Front and side lays Non-stop feeder and delivery options Includes chases for both die-cutting and stamping

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe Hfedpjx Hp E Asfx Adwob 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: excellent (used), functionality: fully functional, Chocolate Enrobing Machine IKM 220 Enrobing machine Model: IKM 220 with chocolate wheel for all types of pastries and cakes Wire belt width: 220 mm Continuously adjustable belt speed Mobile machine, stainless steel construction Connection: 220 V Dimensions approx.: 1200 x 750 x 1400 mm (WxDxH) Used machine, cleaned Options: Maintenance contract Delivery service Service package Discharge conveyor Training & commissioning Visit our large showroom! Hfsdpfx Adexmrcbjwsb

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Hfsdjxp Ntvjpfx Adwjb Photos show machine in production before reconditioning

Condition: new, Year of construction: 2025, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV Hfodpfx Adsh U A Uaewjb NEW machines in prompt delivery -30% OFF PROMOTIONAL machines in prompt delivery CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Hfsdpfxex N Dxvs Adweb Weight: approx. 600kg.

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,250 kg, Hot Foil Stamping Tiegel / Tiegel Heidelberg GTP Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Online-Video-Inspection by FaceTime Hodpfjxu Uc Hox Adwefb Available Immediately - Can be inspect Can be test

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Hot Press Machine • Using Purpose: Pressing Double Glass Hfodewdn S Aspfx Adweb • Usable Glass Measures (max.) : a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm.,

Condition: excellent (used), A3 format Gilding Additional frame Die-cutting material Hfsdpsxtwx Iefx Adwjb

Year of construction: 1982, condition: excellent (used), Gietz FSA 720 die cutting and hot foil Sheet Size 720 x 520mm, High Speed Suction Feeder, Two Sheet Detection, Central Control Console, Hfodpfx Adeul T R Rewjb 2 x Honeycomb, 6 x Heat Zones,

Condition: new, Year of construction: 2025, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) Hsdpfxjf H Hlre Adwjfb 100% made in ITALY CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg Hfodpfx Asx Hqmhedwjb 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Hfjdpexzulzsfx Adwsb Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Hedpfx Aswxtb Eodwefb Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.