Used Hot Water Regulator for sale (10,676)

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Cgodpfxsxwy Aqs Aa Not Gross volume: 2000 l Height: 2100 mm Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge

Condition: used, Vertical hot water tank with internal heating coil for heating with steam. Capacity approx. 30 hl. Additional title: Heatable tank Content approx.: 3000 l Width: 1400 mm Height: 2800 mm Material: stainless steel Position: free standing Csdpfx Asw Tdx Asa Negt Base construction: Cylindrical tank on pipe feet Features: 1 tank with heating device, temperature gauge, outlet in the centre of the base, manhole at the top, overflow

Condition: excellent (used), Year of construction: 2005, 1 used hot water boiler ----- - mounted on frame – Type: UT-L 14 Manufacturer: LOOS Output: 1,500 kW Codpfjyrnhlex Aa Nsgt Permissible operating pressure: 6.0 bar Test pressure: 9.6 bar Permissible flow temperature: 110°C Water capacity approx.: 1,700 l Year of manufacture: 2005 CE mark: 0085 Equipped with Weishaupt combination burner, type GL8 / 1-D, Oil output 65–191 kg/h, gas output 400–2275 kW and control cabinet. Dimensions (approx.): Diameter incl. insulation: 1,500 mm Height: 2,000 mm Length: 3,400 mm Length with burner: 4,600 mm Shipping weight: 3.5 t

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, parking feet, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12,6kW JTR-H 23/350 | 23l/min. at 350bar | Motor: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Motor: Kohler KDW 1404 26kW Cedsfdvkzjpfx Aa Nogt JTR-H 30/500 | 30l/min. at 500bar | Motor: Kohler KDW 2204 37,5kW - Dimensions: 3.370 x 1.640 x 1.540 - empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual with max. 30 m. 1/2" or 100 m. 3/8" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-lime pump with tank - 75 kW heating module - Options and accessories on request

Condition: good (used), Top-maintained Falch Trail Jet 15 500 bar Csdpfx Aouvd N Ssa Negt 1790 hrs Year 2019 Purchased from Falch Hot water Service maintained by Falch Various accessories optional

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Csdjwz Scajpfx Aa Njgt

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Cgjdpewy Elljfx Aa Not

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: Cgsdpfx Aaetywzqe Net - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Cgjdju Rn Agepfx Aa Net

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: Cgsdpjhgbkujfx Aa Not ----- Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg Cgjdpofh Skajfx Aa Nst - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Cedpfjqagl Hsx Aa Nsgt Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments; Cgodpfeg A Rhkox Aa Njt

Year of construction: 2014, condition: good (used), Cryovac STE96-600 hot water shrink tunnel Serial: SN00422 Cgedpfxomx Sknj Aa Not 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, .... Cgsdpfx Aaodqkrwo Not - Cold water / hot water approx. 95°C and steam 32 bar up to 140°C + high pressure steam up to 150°C at 200 bar (only versions with 250 and 350 bar) and chemical free weed killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/250 HP (high pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Torpedo Compact 16/350 HP (high pressure steam) | 16l/min. at 350bar | Diesel engine: Kohler KDW1003 18,9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three plunger pump with ceramic plungers - Operating hours counter - pressure gauge - pressure regulator - safety valve - High quality painted steel frame with forklift lugs - Stainless steel covers - Magnetic descaling device - incl. 20 [...]

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW Cgodjfdkcgspfx Aa Net - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour counter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel, also available with forklift sleeves - Stainless steel covers - Magnetic descaling device - incl. frame for water tank, 500 l water tank - incl. basic accessories such as 20 m high-pressure hose, spray gun, lance, and 25° fan nozzle - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available on request

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H Hot Water 95°C, Steam 140°C/32 bar, and High-Pressure Steam 150°C/200 bar (only for version 16 l/min and 350 bar). Trailer similar but not Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer on galvanized frame with jockey wheel, parking brake, automatic reverse, support legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires, and ABS. Cjdefdkakopfx Aa Negt The following hot water models are available: CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003 19 kW CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003 19 kW | High-pressure steam 150°C at 200 bar - Dimensions: 3,045 x 1,390 x 1,190 mm - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available on request

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Cgedsp H Swdepfx Aa Net Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION Cedpfxjxgua Ao Aa Njgt HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units Cgsdexgumcjpfx Aa Nst – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Cjdoy Aam Nepfx Aa Nsgt Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) Cgedpfx Ajnab Rlea Nst - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition Cjdpfx Aasnab Rzj Njgt - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features Cgodpfonab Sijx Aa Njt - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Cgjdpfx Aaoi Hckrj Nst ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)