Used Hydraulic Guillotine Shear for sale (16,887)

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker design: pendulum cut cutting length: 3.050 mm plate width: 1.000 mm Dwodpfx Adegnywusksc plate thickness: 4,5 mm

Condition: good (used), Equipment: documentation/manual, OMAGATTI SHEAR 2000 x 5 HYDRAULIC MODEL CNH5 USED MACHINE INTERNAL CODE: CAR 152 Djdpfx Adexfkiwskewc

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms Djdpfx Adjxaci Eskewc - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8721 oil volume 240 l Dwodpfx Asxacixjdksc voltage 400 V total power requirement 17.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm Good / well-maintained condition With special accessories (!!) Equipment: - NC electro-hydraulic guillotine shear "Sliding Guided" - Heavy-duty / stable welded construction (machine body) - NC ELGO digital control unit "P8721" - NC electro-motorized backgauge on recirculating ball screws - Electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball transfer units in the work table including recessed grips - Front finger guard - foldable at the front - 1x freely movable foot switch - 2x emergency stop buttons at the front - Operating instructions (PDF) Special accessories included: - Pneumatic sheet holding device for thin sheet metal blanks * Movable - on casters - 1x used Set of scissor blades

Condition: used, Year of construction: 2003, sheet width 3100 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm Djdpfjxach Usx Adkewc down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1.2 ° control ELGO "P9521" work height max. 800 mm oil volume 150 ltr. total power requirement 15.0 kW weight 7000 kg range L-W-H 3900 x 2300 x 1600 mm Current new price approx. 40.000 Euro Special price upon request Equipment: - NC electro-hydraulic swing beam shear - ELGO NC control unit "P9521", front left - NC electro-motorized backgauge * Travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Positioning accuracy 0.1 mm * Travel speed 80.0 mm/sec. - Manual lateral cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - 1x freely movable foot switch - 2x front emergency stop buttons - Rear safety guard - Operating instructions (PDF)

Condition: used, sheet width 2040 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 3300 kg. range L-W-H 2550 x 2100 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) Djdpoxacgwofx Adkewc - Rear sheet chute - 1 freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm from a maintenance workshop Djdpsxacfaefx Adkowc with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Condition: used, Year of construction: 2003, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 14 Stück no. of strokes max. 15 Hub/min cutting angle 1°15 work height max. 770 mm column arm 350 mm oil volume 170 ltr. control ENC 100 oil volume 170 l total power requirement 15.0 kW weight 7500 kg range L-W-H 3850 x 1950 x 1700 mm Equipment: - NC electro-hydraulic swing beam shear Dwodpexacdiefx Adkec - DURMA "ENC 100" digital control unit * Operator control, pivoting to the front left - NC electro-motorized backgauge * Travel = 1.000 mm (X axis) * On recirculating ball screws - Manual quick cutting gap adjustment * Via eccentric (right side column) - Machine column with overhang (350 mm) - 1x extra-long side stop, with mm scale - 2x front support arms, with mm scale - Ball transfer units in the front support table - Front hinged finger guard - 1x freely movable foot switch - Rear safety device (protective grid) - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: used, Year of construction: 2009, sheet width 4050 mm plate thickness 6.50 mm thickness at "Niro-steel" 4.00 mm back stop - adjustable 1000 mm no. of strokes 6 - 11 Hub/min work height max. 880 mm Control SC 70 cutting angle 0.5 - 3.0 ° down holder 23 Stück engine output 11.0 kW weight of the machine ca. 7500 kg range L-W-H 4950 x 1950 x 1720 mm Machine made from light metal production (ALU) Dwodpfxsxaccre Adkjc good condition including special accessories such as sheet metal holding device - in checked condition - machine video - ?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard - original operating instructions including CE declaration Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch Dodpfxjxab Tvo Adkjwc - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek Dodpexab Rusfx Adkswc down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: Dodpfjxab I Hex Adkowc - pneumatic sheet metal holding device

Condition: new, sheet width 2600 mm plate thickness 8,0 mm thickness at "Niro-steel" 5,0 mm Dwedpoxab D Iofx Adkec down holder 12 Stück no. of strokes 18 Hub/min oil volume 200 ltr. cutting angle 1,5 ° engine output 15,0 kW weight of the machine ca. 6.300 kg range L-W-H 3525 x 2350 x 1700 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1996, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good condition With new NC "SC 90" control unit (!!) Equipment: - Electro-hydraulic / slide-guided guillotine shear - HACO NC control model "SC 90" * Pre-selected backgauge positioning * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on recirculating ball screws - Hydraulically operated hold-down clamps - Front finger guard Dwjdpjxab Duefx Adkoc - Ball transfer units in the support table * Support table with recessed grips - 1x side stop with mm scale - 2x front support arms - 1x freely movable foot switch - Rear safety guard - Operating instructions in German (PDF)

Condition: used, Year of construction: 1987, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 / 14 Hub/min back stop - adjustable max. 750 mm Control konv. engine output 10.0 kW weight 4800 kg range L-W-H 3750 x 1600 x 2450 mm maintained condition (!!) Dwsdpfxoxab Aqs Adkjc Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF)

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min Dodexabzgepfx Adkjwc oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system Dsdpjxabwuefx Adkjwc - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Dsdpfx Adexabvqekewc good / well-maintained condition (!!) Equipment: - robust electro-hydraulic "swing cut" guillotine shears - electro-motorized rear stop - electric cutting length limiter - electro-motorized cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable, front support arms - 1x freely movable foot switch - front finger guard - EMERGENCY STOP button at the front - operating instructions * Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

Condition: new, sheet width 3100 mm plate thickness 13,0 mm Djdpfxjxabiko Adkjwc thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Djdpfx Ajxabd Usdkswc Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 14 Stück no. of strokes 13 Hub/min oil volume 260 ltr. cutting angle 2,0 ° Dwjdpfoxabdbjx Adksc throat 350 mm engine output 22,0 kW back stop - adjustable 1.000 mm weight 10.575 kg. range L-W-H 4,05 x 2,5 x 2,17 m ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4,1 x 2,2 x 2,19 m ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting Djdsxabcqopfx Adkjwc - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: new, sheet width 3100 mm plate thickness 13,0 mm Dwodpfxoxaa U Ss Adkec thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 Hub/min oil volume 310 ltr. cutting angle 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 12200 kg range L-W-H ca. 4100 x 2300 x 2235 mm ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 4100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 18 Stück no. of strokes 15 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC Cybtouch back stop - adjustable 1000 mm work height max. 800 mm engine output 11,0 kW weight 8.100 kg. range L-W-H 5000 x 2410 x 1650 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Dwedpfx Adexaa R Tjkoc Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system Dwedpfx Aoxaa Rgodkec - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German