Used Hydraulic Machine Vice for sale (1,06,859)

Condition: good (used), Karl Tranklein ZP 39 two-station hydraulic bookbinding press The device is ready to work. The machine is like new. The press has a built-in hydraulic unit. Two independent stations, single piston surface: 325x440mm Bedpfx Ajwt St Aobzsww Irreplaceable in the bookbinding shop when producing books, blocks, etc.

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can operate horizontally or vertically Bedpfx Abjxgukuszeww Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, jaw width: 160 mm jaw height: 55 mm Bjdpfebt Sd Dsx Abzoww span width: 310 mm span power: 5000 kg total height: 170 mm

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 ! Bwodpfsud Rhvex Abzew

Condition: good (used), Year of construction: 1977, machine/vehicle number: 22247, Offered 23250 Technical data: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW Bsdpfjv Hzr Nox Abzsww - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg - with - Pipe circular saw - Inside and outside pipe deburring device - Pipe necking device - Without tools

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Bwedew Rg Tqepfx Abzew Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: new, Year of construction: 2025, operating speed: 10 mm/s, pressing force: 80 t, warranty duration: 12 months, HP 80 HYDRAULIC HORIZONTAL PRESS MACHINE Tubend HP-Series Hydraulic Horizontal Press Machines can easily make all operations such as bending, cutting, punching, shaping pipe, square profile, sheet metal with standard or special tools. Standard Accessories • Ergonomic Tool Clamping Table • Hydraulic Speed and Pressure Adjustment • Easily Adjustable Back Gauge • Induction Hardened Support Pins Bedpfjvlam Aex Abzoww • NC Control • Easy Tool Change MODEL HP 80 Max Pressure At 200 Bars TON 80 Bending Capacity Flat Material MM 300×20 Max Stroke MM 300 Height Of Toolings MM 300 Working Speed MM/SEC 10 Engine Power KW 7.5 Net Weight KG 1850 Size Of The Machine (LxWxH) MM 850x1600x1600 COUNTRY OF ORIGIN: Türkiye PRODUCED FROM 10 TONS TO 100 TONS.

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Bwjdegd D U Eepfx Abzew Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: ready for operation (used), jaw width: 100 mm jaw height: 41 mm Bodpfx Abod Hurfjzsww span width: 160 mm total height: 127 mm

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch Bjdpfov Uytzox Abzsww - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 1095 mm Measurements depth 3033-3448 mm Measurements height 2010 mm Machine weight 3030 kg Clamping Unit Clamping force 500 kN Opening stroke 400 mm Distance between bars 360 x 335 mm Mould height min 250 mm Bwjdpswvwbwsfx Abzsw Ejector stroke 80 mm Ejector force for / back 20.4 kN / 13 kN Media Oil tank 200 liters Additional Equipment Screw diameter 32mm (SP 82)/ Clear width between tie bars 360mmx335 (hxv) /Maximum ejector stroke 80 mm/ Maximum injection weight PS 69.5/ Minimum mould height 250 mm /Maximum special injection pressure 1076 This BOY 50 E hydraulic injection moulding machine was manufactured in 2024. It features a maximum clamping force of 500 kN, a maximum opening stroke of 400 mm, and a total installed power of 16.8 kW. The machine dimensions are compact, with a length of up to 3448 mm and a width of 1095 mm. Consider the opportunity to buy this BOY 50 E hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: new, Year of construction: 2024, operating speed: 10 mm/s, pressing force: 60 t, warranty duration: 12 months, TUBEND HP Series Hydraulic Horizontal Press Machine can easily perform all productions such as bending, cutting, drilling, shaping for standard or special molds such as pipe, profile, sheet, plate production. Standard Equipment • Digitally adjustable forward-backward distance position • Adjustable working pressure • Adjustable back support • Quick mold connection system • Easy mold change TECHNICAL SPECIFICATIONS: MODEL HP 60 Max Pressure At 200 Bars TON 60 Bending Capacity Flat Material MM 300×16 Max Stroke MM 300 Height Of Toolings MM 300 Bwedevk Sdwopfx Abzew Working Speed MM/SEC 10 Motor Power KW 5.5 Net Weight KG 1530 Size Of The Machine (LxWxH) MM 750x1450x1360

Condition: used, Hydraulic Keyseating Machine FRÖMAG Type RA D 63/425 Serial No. AKK 10102 ASK 2191 Year of manufacture 1981 Max. keyway width: 63 mm Max. working stroke: 425 mm Table size: 460 x 680 mm Working height - table height: 1320 mm Keyway depth feed: 0.01 to 0.25 mm/stroke (feed per stroke) Bore diameter: 10 to 400 mm Bodpfx Asvvwxdebzoww Cutting speed: 2 to 22 m/min Motor power (hydraulics): 4 kW Power supply: 380 Volt, 50 Hz - Feed control for the rack from 0.01 to 0.25 mm per stroke - Manual and automatic operation - Control with digital selector and digital display - Automatic feed with cut-off - Hydraulic working stroke with adjustable overload cut-off - Stroke preselection 1 to 9 - Centralised oil lubrication - Hydraulic cylinder equipped with new sealing elements (1/2025) - Operating manual, hydraulic diagram, and electrical schematic - The machine comes without tooling Weight: 1600 kg Space required L x W x H: 1100 x 800 x 1400 mm In good condition

Condition: used, machine/vehicle number: V-17 1782, Jaw width: 103 mm Jaw height: 37 mm Bwedsdp S U Nepfx Abzjw Clamping width: 175 mm swivel range: 90 Space requirement: 600 x 180 x 150 mm

Condition: used, Year of construction: 2010, machine/vehicle number: 25064, Item No. 25064 Technical Specifications: - Jaw width 200 mm - Jaw height 63 mm - Maximum clamping range 280 mm - Total height 150 mm - Maximum clamping force 6200 daN - Clamping range adjustment with Camlock system Bedjwhbzlopfx Abzeww - Weight 78 kg - Minimum space requirement L 695 x W 200 x H 150 mm - Hand crank

Year of construction: 2009, operating hours: 41,246 h, condition: ready for operation (used), General Data Machine weight 13700 Control Unit Brand ENGEL Model CC 200 Additional Equipment Robot included This Engel VC 330H/200el/180 Combi was manufactured in 2009. It features a screw diameter of 30 mm and includes a robot, despite having a defective CPU. Weighing 13,700 kg, it has accumulated 41,246 operating hours. Consider the opportunity to buy this Engel VC 330H/200el/180 Combi hydraulic injection moulding machine. Contact us for more information about this machine. Bsdpfxew Ih T Ho Abzoww Application Types Injection Moulding

Condition: good (used), machine/vehicle number: 17 10(5), Jaw width: 125 mm Jaw height: 45 mm Clamping width: 220 mm Overall height: 145 mm Bwodpfol Ra Uxsx Abzow Space requirement: total length max. 683 mm Weight: 45 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system Bwjdpfow Ei Tdsx Abzsw - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Year of construction: 2016, operating hours: 5,650 h, condition: ready for operation (used), General Data Measurements width 3400 mm Measurements depth 2800 mm Measurements height 3900 mm Machine weight 8200 kg Automatic cycles 87601 Main Drive Distance between bars 570 x 520 mm Injection Unit Screw diameter 40-50 mm Bodpfx Ajw H Txlebzoww Nozzle pressure 30 kN Clamping Unit Max open daylight 975 mm Ejector stroke 200 mm Ejector force for / back 41.2 kN Additional Equipment Foaming Unit – Battenfeld “Einschäumungseinheit” for physical foaming (MuCell-like) Handling System – Equipped with robot interface; compatible with Wittmann W818/W828 Conveyor Belt – 1400 mm × 400 mm Rotary Table – Integrated, servo-driven, for 2K molding with vertical injection unit Control Panel – UNILOG B6 touchscreen with periphery and MES interface capability Temperature Unit – 1× GWK Logotherm mold temperature controller This WITTMANN Battenfeld HM 180/750H/350V was manufactured in 2016. It features a clamping force of 180 tons and a screw diameter range of 40-50 mm. Notable for its multi-component capability, it integrates horizontal and vertical injection units with a rotary table for 2K molding. The UNILOG B6 control system offers an intuitive touchscreen interface. Consider the opportunity to buy this WITTMANN Battenfeld HM 180/750H/350V hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm Bsdpowpincefx Abzeww - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Bsdju H Acyopfx Abzjww Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: Bwodswk Icbopfx Abzow - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar Bwodpfxowmnhpe Abzsw - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Bedpfx Aert Unwsbzsww Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm Bsdpfx Ajwp Egusbzoww - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports