Used Hydraulic Section Bending Machine for sale (89,490)

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m Fedpou Ibuksfx Ag Roft dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 5.5 kW Fodsw An Uhopfx Ag Rsft Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 874015, Profile bending machine Roundo R3 Ffodex Hw Eqjpfx Ag Ret

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600 Ffsdpfx Ajd Ab H Nsg Rot         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Fedpeuzlh Iefx Ag Roft

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Fsdpevxbm Refx Ag Rjft Additionally, a staircase platform around the machine can be purchased.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, shaft diameter: 50 mm, bending force (max.): 10 t, travel distance X-axis: 200 mm, shaft length: 200 mm, TECHNICAL DETAILS Maximum torque per roll: max. 2,500 Nm Bending force: 10 t X-axis travel: 200 mm Shaft diameter: 50 mm Shaft length: 200 mm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 1,730 mm x 1,600 mm x 1,520 mm Weight: 1,800 kg Ffedoxw Sl Ropfx Ag Rjt Transport packages: 2

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Ffodpfxewkaalo Ag Rjt Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), ZOPF ZB 70/2 H – Ring Bending Machine / Profile Bending Machine Manufacturer: ZOPF GmbH Model: ZB 70/2 H Serial number: 5710276 Year of manufacture: 2005 Category: Ring Bending Machine / Profile Bending Machine Location: Germany Technical Specifications Power supply: 400 V / 50 Hz Motor power: 2.2 kW Current: 6.5 A Number of driven rolls: 2 Top roll adjustment: Hydraulic (H version) Roll speed: 8.5 rpm (max.) Speed control: rotational speed adjustable via potentiometer Mechanical Specifications Shaft diameter of rolls: approx. 40 mm Roll/bending roll diameter: approx. 152 / 162 mm Hydraulic pressure force: approx. 80 kN Adjustment travel of top roll: approx. 120 mm Working position: suitable for both horizontal and vertical operation Construction: welded steel frame, conical roller bearings, interchangeable slideways Bending Capacity (indicative) Round tube: up to approx. Ø 70 × 2 mm Solid round: approx. Ø 35 mm Angle profile: approx. 50 × 50 × 6 mm Dimensions and Weight Machine weight: approx. 470 kg Dimensions: 800 mm wide x 900 mm deep x 1200 mm high Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you verify all relevant details independently. Financial Information VAT/margin: VAT/margin: Fodjxw Np Tepfx Ag Roft VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,-- Ffjdsd Ab H Rspfx Ag Rot                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Motor Power: 7.5 kW Ffedpfsw Smi Ijx Ag Rjt Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. Ffjdpfoxflfmex Ag Rst The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can operate horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Fedpexgukuefx Ag Reft The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Fjdpfx Aoh Alh Hsg Roft Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 5 kW (6.80 HP), STANDARD EQUIPMENT Welded steel construction body Three rollers with motor drive Shafts hardened and ground from special high-strength material Horizontal and vertical working position Ffedsw Smibepfx Ag Rot Hardened standard rolls Movable control panel separated from the main body Manually adjustable mechanical side supports movable in 3 directions Precision bending with braked motor Two digital indicators OPTIONAL EQUIPMENT Rolls for bending pipes and profiles Optional 2-axis hydraulic side supports Automation via NC control TECHNICAL SPECIFICATIONS Upper shaft diameter: 80 mm Lower shaft diameter: 70 mm Roll diameter: 245 mm Working speed: 7 m/min Motor power: 4.75 kW Length: 1500 mm Width: 1000 mm Height: 1400 mm Weight: 1645 kg

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Fodpfjd Acazex Ag Roft

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Fedpfx Agjw Smhws Rsft Lower Shaft Construction: 50 mm Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg

Condition: new, Shaft diameter: 315working speed: 7motor power: 7,5length: 2000width: 1450heigth: 1700weight approx.: 3650 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls Fjdpfoh Alicjx Ag Roft - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Fodpfew Slctsx Ag Roft Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6 Fjdpfx Ajd Ab H Seg Roft         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts Fodpfx Asw Slcgog Reft - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: Ffjdpfxsh Alh Re Ag Rot - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Ffodpjw Slbvsfx Ag Rot Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Shaft Diameter: 80mm Roll diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Fodpfxsd Ab H To Ag Reft Options: NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Ffsdpfoh Alh Uox Ag Ret Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--