Used Hydraulic Pump 200 Bar for sale (60,725)

Condition: good (used), Pressing force 200 to table: 1500x1000 mm motor: 45 kW weight: 18000 kg Dedpfogvz Hxsx Ag Rjul Stand width:1500mm dimensions: Machine: 5500x2610x2150 mm

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Duedpfswva I Hjx Ag Rel Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Dedpfxox Aunfj Ag Rsul

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke length: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-PURPOSE workshop / press Available in both 20 and 25 tons. Dujdot A Dznspfx Ag Rjl BAR-MAN 20: 3,450 euros BAR-MAN 25: 3,990 euros The BAR-MAN can be used for a wide range of applications. Examples include maintenance work, cutting keyways, pressing bearings in and out, and much more. With this powerful machine, you can tackle almost any task, all while maintaining maximum operator comfort.

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery Dedpfx Agsxrb Nbe Rjul - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: like new (used), Unused KSB Etanorm G065-200 Dedpfoxw Nw Rox Ag Roul

Condition: new, Technical Specifications: Capacity: 200 t Dujdpopl T Diofx Ag Rel Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight (approx.): 2600 kg Equipment features: - Laterally adjustable cylinder via rack, pinion, and handwheel - Generously dimensioned working area - Height-adjustable table - Torsion-resistant welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Your benefits: - Among the heaviest-duty models on the market - Available in capacities up to 500 tons - Maximum performance and stability - Various table widths available upon request - Horizontally freely positionable hydraulic cylinder with handwheel, rack, and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Dsdpfxjxrgu Ao Ag Roul Type: U 120 V4 0.18 No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Motor power: 0.18 kW Tank capacity: approx. 8 liters Power supply: 400 Volts, 50 Hz - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Net weight: 20 kg Good condition

Year of construction: 2008, condition: used, Field of application: Freight transport Attachment suited for: Loading and unloading machines Please contact ATS Norway for more information Please provide reference number upon request: 20081 Specifications: 2008 model Weight: 750 kg Hydraulic pump Length: 12 meters Ready for delivery Description:2008 Palfinger PK 14080 C crane with hydraulic pump.The crane was overhauled when the owner purchased it.Ready for delivery. Own weight: 750 Djdpfjw Ia Ngox Ag Rsul Model: PK 14080 C kran m/ hydraulikk pumpe

Condition: used, Year of construction: 2017, operating hours: 19,782 h, functionality: unexamined, machine/vehicle number: 3869002, overall weight: 4,840 kg, motor manufacturer: ABB, volume flow: 36 m³/h, Equipment: type plate available, For sale: ALUP Kompressoren Allegro 200DW Technical Data: Manufacturer: ALUP Kompressoren GmbH Model: Allegro 200 DW Type: Industrial screw air compressor Pressure: 8 bar Capacity: 36 m³/min Duedpfxsxy Sagj Ag Rel Voltage: 400 V Frequency: 55 Hz Motor Power: 200 kW Motor Speed: 2983 rpm Serial Number: TRD128935 Production Date: 09/2017 Weight: 4840 kg Noise Level: 79 dB(A) Made in Germany

Condition: good (used), Year of construction: 2021, functionality: fully functional, With the stretchMASTER 6000, you can straighten steel bars up to 6 meters in length. The processable cross-sections are: round steel 6 – 30 mm, flat steel 4 – 12 mm as well as 12 – 60 mm, and square steel 8 – 25 mm. Djdpfx Agoxyxkre Rsul The machine can be inspected by appointment. Delivery is available at an additional charge.

Condition: good (used), Year of construction: 2011, Mono pump, dosing pump, high pressure pump, water pump, screw pump, eccentric screw pump, hopper pump, eccentric spindle pump Duedpfx Asffk Ineg Rol -Connection: DN80 -E-Motor: North 3.0 kW -Gearbox: Nord SK25-100LA/4 TF -Speed: 105 rpm -Price: per piece -Quantity: 3 pieces -Dimensions: 1810/200/H300 mm -Weight: 107 kg/piece

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, DP Pumps Pump Set HU 4 UL DPV15/4 SVP NW100 R L LEFT Manufacturer: DP Pumps Model: HU 4 UL DPV15/4 SVP NW100 R L LEFT ID: 0945600033 Year of manufacture: 08/2020 Power supply: 3x400 V, 50 Hz Current consumption: 32.2 A Pump dimensions: 1350 mm × 900 mm × 950 mm Control cabinet dimensions: 600 mm × 350 mm × 1520 mm Configuration: Four-pump booster set The DP Pumps HU 4 UL DPV15/4 SVP NW100 pump set is a modern, energy-efficient booster unit designed for automatic pressure increase in water supply systems. Equipped with four vertical multistage DPV15/4 pumps, it ensures stable operation, high performance, and optimal energy consumption. The integrated control cabinet allows precise management of pump operation – automatic start/stop, speed control, and system protection against dry running and overload. Dodpfxoxviztj Ag Rsul

Condition: used, Year of construction: 2008, The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it: - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products. - Applications: It's typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese. Duodpfx Aex Aa Spjg Rol - Specifications: Although specific technical specifications can vary, common features might include: - Capacity: Often measured in liters per hour, indicating the amount of milk it can process. - Pressure Ratings: The operating pressure used during the homogenization process. - Material: Typically made from stainless steel for hygiene and durability. - Efficiency: The H3075 model is known for its efficiency in energy consumption relative to its output and performance. - Maintenance: Regular maintenance is required to ensure optimal performance, including cleaning the unit and checking parts for wear. Capacity: 10,000 Litres per hour Pressure: 200 Bar Stages: 2 Electrical Requirements: 380/50 Hz Max KW : 75 Amps Requirements: 137 A Condition: Very Well Maintained Full Service in 2025

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed Dodpfexabw Ijx Ag Rsul * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, Year of construction: 2025, Fits to following machines: Powerscreen Warrior 1400, Warrior 1800, Chieftain 2100 Gear triple pump X1A504650335033/124003/1C Dodpfeigvctex Ag Roul we are polish distribiutor of David Brwon Hydreco original genuine new pumps. All Powerscreen pumps on stock. Pump designed for Powerscreen Warrior 1400, Warrior 1800, Chieftain 2100

Year of construction: 1994, condition: good (used), machine/vehicle number: GCHREIS, SPECIFICATIONS: Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 71” Daylight Opening: 98” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Oil Reservoir Capacity: 153 Gallons Motor: 25.3 Kw (approx 33 HP) 41 amps / 1755 rpm Power: 480 v/3ph/60cy Dedel Ayc Topfx Ag Rjul Approx Floor Space required: 322.83” lr x 133.85” fb Approx Overall Height: 261.5” Above Floor: 233.8" Approx Overall Weight: 103,617# EQUIPPED WITH: Press Controls Console Top Mounted Hydraulics Roll Out Bolster (Table) Tilt Down Ram (180º) SPECIFICATIONS SUBJECT TO VERIFICATION

Condition: excellent (used), Hydraulic pump, oil pump, gear pump Duodpfx Agecgqdae Rjl -Pumps: are unused -Contents: approx. 20 l -Electric: 24 V 3 KW -Working pressure: 140 bar -Number: 13x pumps available -Price: per piece -Dimensions: 900/175/H210 mm -Weight: 24 kg

Condition: new, neu ca. 4 Monate ab Auftragse Italien 132500 € 2504.25 € 200 to 500 mm 1250x1000 mm 600 mm 25 mm/s 3,5 mm/s 7.5 kW 1550 mm 1300 mm 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Duodpfx Aowiq Absg Rjl Oil cooler with decompreission valve € on Request Pressur switch € on Request

Year of construction: 2018, condition: good (used), water pump KSB ETB 050-032-200 26 m³/h 55m 11 KW price: 2.750 Euro Djdpfx Agji E Icis Roul contact: Mr. Rainer Eckerle

Condition: new, functionality: fully functional, machine/vehicle number: 05124130, power: 7.5 kW (10.20 HP), protection type (IP code): IP64, Pump is new from spare parts stock Dedpfx Asuyg Rzog Reul

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 375 mm, pressing force: 200 t, table width: 750 mm, table length: 1,000 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) Dodpfxjvzkvgs Ag Reul - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 200 PRESSURE (TONS) 200 STROKE (MM) 800 THROAT DEPTH (MM) 375 TABLE – RAM DISTANCE (MM) 900 TABLE DIMENSION (MM) 750X1000 PRESS DEPTH (MM) 1500 PRESS WIDTH (MM) 850 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2900 MAIN CYLINDER DIAMETER (MM) 320 ENGINE POWER (KW) 22 WEIGHT (KG) 11500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece Dedexl Rzgspfx Ag Rjul -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm Duodpfx Aevviggsg Rel -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gearbox, electric motor, DC motor, traction motor, drive motor -Manufacturer: Juli, drive motor with hydraulic pump from electric forklift -Type: GP 116-14/7.9 -Voltage: 48 volts -Power: 9.0 kW -Speed: 2900 rpm Duedpfx Agexlcg Ie Rol -Individual components: see photos -Dimensions: 460/400/270 mm -Weight: 41 kg