Used Hydraulic Hose Press for sale (38,965)

Year of construction: 2022, condition: like new (used), functionality: fully functional, Gates MCX 25 hydraulic hose crimping machine for sale – like new, barely used machine. Please refer to the technical specifications on the Gates manufacturer's website. Additionally, the Gates MK 3000 hydraulic hose cutting machine is also available for purchase. The listed price is net and applies only to the hydraulic hose crimping machine. Pgodsxw Rzkjpfx Ab Iow

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140_10, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Pgsdpfsxd U Nlsx Ab Iow Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 1,44,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 25/11/2025 2000 tons press hydraulic Pgsdpfxsw Hrido Ab Isw Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 144.5 tons YOM: 1986

Condition: good (used), Press machine, hydraulic press, used machine Pjdpst A U Irofx Ab Ijgw Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw Pgedpstndu Ujfx Ab Isw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Podpocmat Uefx Ab Iogw the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: good (used), Year of construction: 1990, Pressure: 1200 t Stroke height: 800 mm Table size: 1600 x 4000 mm Pgjdpsxzd Ewjfx Ab Ijw

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm Podoxb Scwjpfx Ab Ijgw - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Pgodpfsdwf Dbjx Ab Ijw

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Motor power: 2.2kW - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Podpfew N St Hex Ab Isgw

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Pgodpjw N Su Dsfx Ab Ijw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1982, functionality: fully functional, Overtravel distance 9 mm; overtravel time 85 ms Pgsdpfexz Dbfox Ab Isw

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Pjdpsxzlqhsfx Ab Isgw Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Catalogue number 7830 TECHNICAL DATA - size of heating plate: 2200x1100 mm - number of batches: 1 - electrically heated shelf - total clearance: 280 mm Podpfexz Ebgex Ab Iegw - number of cylinders: 4 - cylinder diameter: 80 mm - total power: 10 kW - dimensions (L/W/H): 2540x1260x1860 mm - weight: approx. 2000 kg ADVANTAGES – German-made – electrically heated shelf – unpainted – very good condition – used press Net price: PLN 15,900 Net price: EUR 3,790 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, price may change)

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm Pgodpfx Asxz Hfmeb Iew stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP Pgsdpfx Ajumk Najb Iow General: Display: 0-400kp/cm2 / 0-25Mp

Condition: ready for operation (used), Hydraulic Press, HARE 6 HP, Used Machine Manufacturer: Hare Model: 6 HP Overall Dimensions: Width: 960 mm Depth: 1160 mm Height: 2000 mm Table Size: 570 x 290 mm Stroke Length: 100 mm Clearance: 460 x 290 mm Working Pressure: 6 tons (60 kN) Podpfx Aexxiybsb Iegw Year of Manufacture: 2005 Electrical Data: 400V; 3 kW Air Pressure: 5.5 bar Weight: 620 kg

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed Pgodou Nfn Rjpfx Ab Isw - no CE certification available i.D. *

Year of construction: 2018, condition: ready for operation (used), General Data Measurements height 2650 mm Dimensions Pjdpsxx Du Hjfx Ab Iegw Machine Length 3400 mm Main Drive Pressing force 784.53 Kn Number of axis 4 Movement X-Axis Movement 500 mm This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm - Passage: 2050 mm Pedpfx Aboxdc A He Isgw - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm Psdpfx Abjw D Hiaj Iogw table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Pgsdpfx Abjhfwqzs Iew Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: ready for operation (used), Hydraulic Press, HARE 6 HP, Used Machine Pgsdpsxxikyefx Ab Iow Manufacturer: Hare Model: 6 HP Overall Dimensions: Width: 940 mm Depth: 1110 mm Height: 2000 mm Table Size: 570 x 290 mm Stroke Length: 100 mm Clearance: 470 x 240 mm Working Pressure: 6 tons (60 kN) Year of Manufacture: 2005 Electrical Data: 400V; 3 kW Air Pressure: 5.5 bar Weight: 620 kg

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Podpfx Aoxx Dx Ejb Iegw Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Year of construction: 2021, condition: ready for operation (used), General Data Measurements height 2850 mm Dimensions Machine Length 3950 mm Control Unit Brand DELEM Pedpsxwqr Aofx Ab Ijgw Model DA-58 Main Drive Bending length 3100 mm Pressing force 220 Kn Number of axis 2 This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine. Application Types Bending