Used Idx 23 for sale (19,418)

Condition: good (used), Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: SK30 23 pieces Dlsdpfx Aetxkuheddoa -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 480/400/H315 mm -Total weight: 20.2 kg

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Dledpfewkir Dsx Addsa Storage location: Nattheim

Condition: used, mileage: 48,671 km, power: 174 kW (236.57 HP), first registration: 10/1992, overall weight: 12,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t towing capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10 Rx 22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. We will deliver the Iveco with a fresh MOT/AU and H-certificate upon request. = +500€ The GVW is 12.5t. The curb weight is approximately 8.0 t, so the 120-23 cannot be reduced to 7.5 t. Dlodpfx Adsx A N Sfjdoa The V8 diesel engine and 5-speed transmission run smoothly, the car is easy to drive. Top speed according to the documents = 93 km/h Bag dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: used, Year of construction: 2006, Four-sided planer Little Kuper SWT 23 XL-6 Year of construction 2006 min/max Working height 8/125 mm min/max Working width18/230 mm Working speed 6/28 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines 1st. Spindle - under 5.5 kW 2nd Spindle - right 5,5kW 3rd Spindle - left 7.5kW 4th. Spindle - above 11kW 5th. Spindle - above 7.5kW Dljdpfoxyvzujx Addja 6th Spindle - under 7.5kW Main fuse 105 amp. Dimensions 7500 x 2000 x 1850 mm (L x W x H), weight 4000 kg - Year: 2006 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2025, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm Dlodpfecnwydox Addsa max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm Dlsdpfx Adoi Hph Sodea dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Dlodpfswqr Rvox Addea Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: used, Year of construction: 2005, Unimat 23 E: Working width (with cutter circle 140 mm): 20 – 230 mm. Working height (with cutter circle 163 mm): 8 - 120 mm. 1st spindle lower horizontal spindle: 7.5 kW, 2nd spindle right vertical spindle: 11 kW (shared with left vertical spindle), 3rd spindle left vertical spindle, 4th spindle upper horizontal spindle: 7.5 kW. Each spindle diameter: 50 mm. Each spindle speed: 8,000 rpm. Feed system: 4 kW. Mechanical feed, steplessly adjustable: 5-24 m/min. Working table: 2.5 m long (incl. joining fence). Uniplan 23: Max. working width: 230 mm. Working height min.: 15 mm / max.: 120 mm. Feed: 3 kW. Horizontal spindles each 5.5 kW. Feed speed, steplessly adjustable: 6 – 36 m/min. Spindle speed: 6000 rpm. Spindle diameter: 50 mm. Tool clamping length: 240 mm. Max. tool diameter: 163 mm. Fixed lower chip removal: 0.5 mm. Short piece package for min. workpiece length: 280 mm. Mechanical spindle brakes up to 7.5 kW. Feed braking system up to 5.5 kW. 1st feed roller synchronized with photocell. Spindle speed 7200 rpm, incl. motor power 7.5 kW. Improved noise insulation of the full safety enclosure. Dsdpfxovvkcie Addjla Location: Customer

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Dledpfx Ajx A N R Ueddoa Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: used, Year of construction: 2002, Dimensions (LxBxH): 355 x 125 x 173 cm Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No Djdpfx Adoxykrzjdola - Serial number: 95140 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Min. planing width [mm]: 13 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1.5 - Transport dimensions: 3550mm x 1250mm x 1730mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2025, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Djdpfx Aoci Tvheddola Location: ex stock 54634 Bitburg

Condition: used, mileage: 1,60,000 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 10/2021, loading space length: 4,340 mm, loading space width: 2,140 mm, loading space height: 2,450 mm, loading space volume: 23 m³, emission class: euro6, color: white, number of seats: 3, total length: 6,900 mm, total width: 2,190 mm, total height: 3,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35s14 – Box body for furniture with 3.5 t approval – * Box length (internal): 4.34 m * Box height (internal): 2.45 m ----* 1st owner * NEW: Oil change service * NEW: Front tires * NEW: TÜV (German roadworthiness inspection renewed upon purchase if desired) * Air conditioning * Cruise control * Rear double doors with 270° opening * Rear step * Central locking with remote control * Bluetooth hands-free telephone system * Radio * USB, AUX, Bluetooth audio * Electric windows * Electrically adjustable exterior mirrors * Heated exterior mirrors * ABS * ESP * Engine start/stop function Djdpsxv Nngofx Addsla * On-board computer * Euro 6D engine * 6-speed manual transmission * 3 seats – double passenger bench * Roof spoiler * Reversing camera ----* Wheelbase: 4,100 mm (extra-long wheelbase) * Dimensions (cargo space/loading area) LxWxH: 4.34 x 2.14 x (2.45 m - 2.41 m) * Loading volume (in m³): approx. 22.8 m³ * Permissible total weight: 3,500 kg * Payload: 960 kg * Truck registration – N1 * COC documents * VAT deductible ----* We speak German / English / Greek * Financing options available * We assist you with all registration matters (export plates, temporary plates) and customs formalities * We will gladly make you an offer for your vehicle * WEB: * E-MAIL: ----Price subject to change, prior sale, typographical and clerical errors excepted.

Condition: good (used), Year of construction: 2019, Year of manufacture: 2019 Technical condition: good Visual condition: good Price: On request Dlodox Dtwbspfx Addja Please contact John de Koning or Mark de Koning for further information.

Condition: used, mileage: 1,12,348 km, power: 232 kW (315.43 HP), first registration: 08/2019, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, 1344Bh 4/25 Left-hand drive, differential lock, steered/liftable trailing axle, stop brake for waste collection vehicle, 3-seater, ASR, ADR, central locking, speed limiter 30/85 km/h, radio, rotating beacons, pop-up roof, decorative inlays, armrests, sun blind, cornering light, daytime running light, LED position lights, emergency brake signal (ESS), Brake Assist 2, Lane Guard System 4, HS turning assistant, Olympus Industrial 23 m³ with HS dumping hopper Comfortlift type U-K-KL EuroMax, suitable for 80 l to 5 m³, bulky waste collection with foldable chute, comfort gearshift, central lubrication system, hopper lifts approx. 2 t, Welvaarts scales Dodjwcikqspfx Addela

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Dlodpfx Aovbwzvjddsa Right Left Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Condition: used, Year of construction: 1994, functionality: unexamined, planing height: 120 mm, planing width: 230 mm, total height: 1,700 mm, total length: 4,600 mm, overall weight: 3,550 kg, Machine with 6 planing heads bottom 4 kW, right 4 kW, left 4 kW, top 5.5 kW, top 4 kW, bottom 4 kW Dlsdpfx Aev Dx Euoddja Working width 25 - 230 mm Planing height 6 - 120 mm Feed speed 5 - 35 m/min Feed motor 4 kW Spindle speed 6000 rpm Spindle diameter 40 mm Infeed table length 2000 mm Machine weight 3800 kg Dimensions (L x W x H) approx. 4550 x 1700 x 1700 mm

Condition: good (used), power: 126 kW (171.31 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 9,325 h, Equipment: air conditioning, Technical information Track width: 86 cm Drive: Track Make of engine: SAA6D107E-2 Empty weight: 18.690 kg Functional Working width: 365 cm Djdpfsxxpd Hox Addjla CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMT0D120K01030695 Other information EPA Marked: yes Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 5,4x3x3,45 Production country: JP Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, mileage: 1,95,000 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 10/2022, next inspection (TÜV): 06/2027, loading space length: 4,330 mm, loading space width: 2,140 mm, loading space height: 2,450 mm, loading space volume: 23 m³, color: white, number of seats: 3, total length: 6,860 mm, total width: 2,200 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35s14 – Furniture Box Truck with 3.5 t Approval – * Box length (internal): 4.33 m * Box height (internal): 2.45 m ----* 1st owner * NEW: Oil change service * NEW: TÜV (inspection) – valid until 06/2027 * NEW: Front and rear brakes * Air conditioning * Cruise control * 2 rear swing doors with 270° opening * Rear access steps Dodsxhauuopfx Addjla * Central locking with remote control * Bluetooth hands-free phone system * Radio * USB, AUX, Bluetooth audio * Electric windows * Electrically adjustable exterior mirrors * Heated exterior mirrors * ABS, ESP * Engine start/stop function * On-board computer * Euro 6E engine * 6-speed manual transmission * 3 seats – dual passenger bench * Roof spoiler * Rear parking sensors ----* Wheelbase: 4,100 mm (extra-long wheelbase) * Dimensions (load space): LxWxH: 4.33 x 2.14 x (2.45 m – 2.41 m) * Load volume (in m³): approx. 22.7 m³ * Permissible total weight: 3,500 kg * Payload: 908 kg * Truck registration – N1 * COC documents * VAT deductible ----* We speak German / English / Greek * Financing available * We assist with all registration matters (export plates, temporary plates) and customs formalities * We are happy to make you a purchase offer for your vehicle * WEB: * E-MAIL: ----Subject to price change, prior sale, typing errors, and mistakes

Condition: good (used), power: 68 kW (92.45 HP), fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 5,811 h, Equipment: air conditioning, Technical information Track width: 60 cm Drive: Track Dodoxxzxpjpfx Addsla Make of engine: SAA4D95LE-6 Empty weight: 8.640 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMT0D121E01080161 Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 4,275x3,2x2,775 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: refurbished (used), Year of construction: 2023, operating hours: 810 h, load capacity: 1,400 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 251 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles in stock ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase On-site demos and consultations available now – we’ll find the right solution for you. Dodpfx Adow Uctnjdsla Industrial Truck Specifications: Manufacturer: Jungheinrich Type: Electric Pallet Truck EJE 114 Drive type: Electric Load capacity: 1,400 kg Year of manufacture: 2023 Operating hours: 810 Lift height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 251 kg Load center: 600 mm Tires: Polyurethane Model type: EJE 114 Battery type: Gel Battery weight: 156 kg Charger: Integrated charger

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping Dledjxqh E Hspfx Addja 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: new, functionality: fully functional, Spindle unit MKK05-026-23-60-080-01024 Dljdoxz Ahdepfx Addea Factory-sealed, from stock with documentation EMAG order number: 20596156

Year of construction: 2025, condition: new, neu 2025 030161 ca. 2 - 4 Wochen ab Auftr Deutschland Dodpfxjxcg Ecj Addsla 7170.9 € 138.4 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Gewindeschneideinrichtung Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: good (used), power: 126 kW (171.31 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 12,870 h, Equipment: air conditioning, Technical information Track width: 86 cm Drive: Track Dlsdpfxsxxmv He Addoa Make of engine: SAA6D107E-2* Empty weight: 18.600 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMT0D120C01030604 Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 5,48x2,99x3,18 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), power: 126 kW (171.31 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 13,256 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KTMT0D120J01030245 Technical information Track width: 86 cm Drive: Track Make of engine: SAA6D107E-2* Empty weight: 18.600 kg Functional CE mark: yes Condition Djdpsxxmvyefx Addsla Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 5,48x3,53x3,18 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information