Used Immersion Tub for sale (3,004)

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Kfodpfei Arlhox Aanea Material: Acid resistant It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Kfodpfx Aaefz I N Tsnoa materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Kjdefz Aw Hspfx Aanjfa

Condition: used, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Spray head, crane lugs Design: Vertical Remarks: Sheet metal cut-outs in top plate (see photos); 2 electric immersion heaters each (functionality not guaranteed) Speed: 11 / 17 rpm Outer diameter: 2,680 mm Inner diameter: 2,550 mm Total height: 3,850 mm Heating/Cooling: available Insulation: available Power: 2 / 3 kW Agitator: anchor agitator Base type: height-adjustable feet Location: Bremen Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Previous use: bitumen TANK Number of feet: 4 pcs HEATING/COOLING JACKET Internal temperature control: Immersion heater Kfodoxqbnbepfx Aanoa INSULATION Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on top plate (DN 500) Note: slight residues, dents on insulation jacket Outlet: 60 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Voltage: 380 V Bottom bearing: Agitator arrangement: eccentric in top plate

Condition: used, Impregnation bath or dipping bath Wichmann type 13,000 L for soaking / dipping of whole wood packages with hydraulic lift and circulation pump. Package size: max. 590 x 100 x 120 cm length: 6.000 mm Ksdox Hf Hcepfx Aanefa width: 2.200 mm height: 3.250 mm Filling quantity: max. 13,000 L

Condition: used, mileage: 1,56,000 km, Year of construction: 2021, Serial number: WMA30EZZ5MM87xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21127 Specifications: Km: 156,000 (will increase) Transmission: Automatic Suspension: Steel front, air rear 6x2 Tires (see pictures) Retarder Euro 6, 581 hp Tow hitch VBG Nor Slep tipper box Toolbox Nor Slep asphalt body Air horn Extra lights Box (see pictures) Bed Radio/CD Climate/AC Video Delivery by agreement Description:MAN TGX asphalt truck with body and tipper box.The truck is EU-approved and has run 156,000 km.Delivery by agreement. Km: 156000 HK: 580 Technical approved: Yes Ksdpfx Asw Radioansfa EU-approved until: 21.09.2026 Own weight: 13950 Payload: 19975 Model: 2021 MAN TGX 33.580 6x2 Asfaltbil m/ Dumperkasse og Balje.

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. Kjdpofw N Rtefx Aanofa WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. APPLICATION AREAS AND ADVANTAGES: Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Apart from these, only applications for cleaning and oil removal can be made. There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Condition: used, Tiltable yeast container with removable lid and spout. Additional title: tiltable stainless steel vessel with spout Capacity appr.: 70 l Length: 0,8 m Width: 0,7 m Kfodpfx Ajxwy Dzeansa Height: 0,8 m Material: Stainless steel Base construction: On stainless steel frame Features: removable lid, spout

Condition: ready for operation (used), A conventional lathe Mexpol is available. Distance between centers: 2000mm, swing diameter over bed/cross slide/bed gap: 630mm/385mm/820mm, center height: 300mm, spindle bore: 103mm, speed: 2000rpm, quill stroke: 200mm, max workpiece weight: 520kg. Machine dimensions X/Y/Z: approx. 3950mm/1550mm/1500mm, weight: approx. 4300kg. Including accessories. An on site inspection is possible. Kjdpsx A Hg Tofx Aanefa

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm Kfsdephup Aspfx Aansa -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support Kfedpsu Ix Rpsfx Aansa - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: used, New: No Field of application: Freight transport Please contact ATS Norway for more information Kfsdoxydiyopfx Aanja Please provide reference number upon request: 21848 Specifications: - Uncertain model year - Owner says it has been used for 3 seasons - Has been on a Mercedes 3355, wheelbase of 330 cm - Needs to replace cylinder on hood - Double insulated on guillotine hatch - Approved for county government - Tipptube not included

Condition: new, Year of construction: 2026, turning diameter over cross slide: 620 mm, turning diameter: 6,000 mm, spindle bore: 103 mm, turning diameter over bed slide: 860 mm, New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Working range: - Center height [mm]: 330, 380, 430 - Rotation diameter over bed [mm]: 660, 760, 860 - Rotation diameter over cross slide [mm]: 420, 520, 620 Kfjdeufgfyspfx Aanea - Center width [mm]: 1500 to 6000 - Bed width [mm]: 560 - Spindle nose DIN 55027/11 - Spindle bore [mm]: 103 - Max. Torque (spindle) [Nm]: 2000 - Speed control: Stepless - Speed stages: mechanical 3 - Total speed range [rpm]: 9 - 1320 / 12 - 1250 - Power [kW]: TUB660C: 15 / 18.5 - Feed rates X/Z [mm/min]: 1 - 3000 - Rapid traverse X/Z [mm/min]: 8000 - Quill diameter [mm]: 105 - Inner taper of quill [MK]: 6 - Quill stroke [mm]: 225 - Workpiece weights supported with tailstock [kg]: 1500 Options: - Fixed tailstock - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drill rig with boring bar - And much more

Condition: like new (used), Temperature range (°C) -15 to 40 Cooling power (W) Kedpfx Aelnbh Toansfa at 20°C 400 at 0°C 320 at -10°C 170 Overall consumption (VA) 500 Dimensions (d/w/h, mm) 460/305/225 Weight (kg) 21 Flexible pipe (l, mm) 925 Coil (Ø/l, mm) 77/55 Electrical supply 230 V (50Hz) Good working condition. Please check out our other listings as well.

Year of construction: 2013, condition: as good as new (ex-display), Technical description with the following main data: Load capacity 1000 kg static line load Useful stroke 895 mm Overall height 85 mm Total height 980 mm Platform length 1450 mm Platform width 1000 mm Material Smooth sheet metal Stroke time approx. 15 sec. for the full effective stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Engine 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 in general, solenoid valve and switch IP 65 Unit placement free standing Operating box Dead man's control incl. 2 m cable Total weight approx. 205 kg Standard version: The lift tables comply with EN 1570 E and are marked with the CE mark. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane varnish. The lift tables are equipped as standard with safety shut-off strips on all sides made of aluminium and with assembly supports for repair and service. Kfedofm U Auepfx Aansa Our lifting tables are dimensioned for approx. 10 strokes/hour with full load in 8 hours/day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts during normal operation in one shift, excluding labour costs.

Condition: excellent (used), PACK’R filling machine in near new condition. Has been filling mayonnaise and various sauces into the following; 12 x 10 kg buckets per min, 18 x 5 kg buckets per min, 18 x 2.5 kg buckets per min, 25 x 5 litre Jerry cans per min, 25 x 2.27 kg Jerry cans per min, 18 x 1 litre burger van squeezies per min. Bought new in 2017, current price is approximately £450,000 Ksdpfxepgq I Ds Aanjfa

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Kfedpfx Aaexf Ey Renea

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW Kjdpfsxcuicex Aanefa weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Year of construction: 2000, condition: used, Cylindrical fermenter with side outlet in the lower part of the frame and cleaning connection in the hinged lid. Total volume: 1343 l Kfjdpfow Td Eiox Aansa Net volume: 1000 l for fermentation Length: 1495 mm Width: 1495 mm Height: 900 mm Material: stainless steel Features: PT100 and magnet valve for temperature control

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. • Very user-friendly Kodpev Srabsfx Aanjfa • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 100 L/h Power requirement: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute Kfjdpfxevgwqhe Aanoa

Condition: used, Bucket fillers for yoghurt are specialized machines used in the dairy industry to fill containers or buckets with yoghurt product efficiently and accurately. Here are some key points about them: - Types: There are various types of bucket fillers, including gravity fillers, volumetric fillers, and piston fillers. The choice depends on the viscosity and type of yoghurt. - Automation: Many bucket fillers are semi-automated or fully automated, which helps in improving the speed and accuracy of the filling process. - Hygienic Design: Since they deal with food products, these machines are designed to comply with health and safety regulations, ensuring easy cleaning and maintenance. - Adjustability: Some bucket fillers allow for adjustable filling volumes, making it easier to fill different sizes of buckets with varying quantities of yoghurt. New Tub Fillers By for 1 kg up to 10kg buckets Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Machine dimensions:Length: 5 meters Ksdpfx Asxpvugoanefa Type: ΒΕ 220 Width: 1 meter Height: 230 meters Machine Dimensions Length: 5 meters Delivery: 4 months

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap Kfodpfx Asdzqn Doansa - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Kodpfx Aaoxcuiienjfa Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Kfjdpfev Srblex Aanoa Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg