Used Impregnating for sale (63)

Condition: like new (used), Year of construction: 2019, Partial area dryers IWT, widely used in the automotive industry, Chedsxxa Nmepfx Apteb

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Internal diameter: 1950 mm Chedpsw S N Awefx Aptsb Total length: 13,500 mm + 3 tanks for impregnant

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Chsdow E Evzspfx Aptsb

Year of construction: 1997, condition: ready for operation (used), A large-format wood impregnation plant by Wichmann-Metallbau is available. Nominal volume: 28m³. An on-site inspection is possible. Chedpfxjzpyxpe Aptob

Condition: used, Flood nozzle zone: - 8 pieces, 3 flood nozzles, adjustable, from above - 10 pieces, 3 flood nozzles, adjustable, from below - Material-carrying parts made of stainless steel - With pump unit for the flood nozzles Chodozf N D Tjpfx Aptjb Drying zone: - Air circulation fan with soundproof housing, dimensions 1190x1190x1170 mm - el. power 15 kW, connection diameter DN 300 mm - Air circulation system incl. fan (see pdf.) - 4 nozzles, each 1300 mm wide, for drying from above, adjustable - 4 nozzles, each 1300 mm wide, for drying from below, adjustable Transport system: - Transport system Stainless steel disk roller conveyor Technical data: - Manufacturer Finnrose - Type. Impregnation 1300 - Year of construction 1999 - Working width 1,300 mm - Max. Part height 300 mm - Shortest part length 300 mm - Length 4,000 mm - Width 1,860 mm - Height 2,200 mm - Location, in stock

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. Chsdpfx Apjymxqasteb The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Csdpjy T Iyrsfx Aptehb Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, impregnation container used, good condition container size l x w x H ca. mm 750 x 750 x 1130 with cover membrane pump air operated required space ca. l x w x h mm 1200 x 800 x 1400 Csdpsvwgd Eefx Aptohb weight ca. 200 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Year of construction: 2008, condition: ready for operation (used), Schiele impregnating machine Year 2008 all in stainless steel Chsdpfx Ajd H Skbjptob

Condition: good (used), wood impregnation line Chjdjzwx Niopfx Aptsb

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Cedpfx Aexrpmzsptohb Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: new, A2C develops, manufactures, installs, and maintains a wide range of effective, reliable, and efficient solutions for all companies in the wood processing industry. Our qualified and experienced team offers you the optimal equipment for your projects. A2C offers equipment for four application areas: Chodpfxewnqn Ie Apteb – Wood processing (e.g. impregnation tanks), – Robotics, – Logistics, – Handling (loading containers) Please feel free to contact us.

Condition: excellent (used), For sale is an industrial autoclave (pressure impregnation unit) manufactured by the renowned Czech company VYVOS spol. s r.o. This unit, with a substantial capacity of 75 m³, is designed for professional wood impregnation using the pressure-vacuum method. The machine was previously used with popular impregnation agents (the unit displays a Tanalith E marking), making it an ideal solution for sawmills, wood processing plants, and manufacturers of garden architecture. Parameters and Technical Specifications: According to the attached original nameplate and documentation, the unit has the following parameters: Manufacturer: VYVOS spol. s r.o. (Czech Republic) Year of manufacture: 2005 Working capacity / Volume: 75 m³ Basic dimensions (chamber): approx. 2.0 m x 13.2 m (the total length of the unit is over 14 m, according to the technical drawings) Maximum working pressure (overpressure): 0.8 MPa (8 bar) Maximum working temperature: 20°C (typical for cold impregnation) Factory number: 2119 Registration number (passport): 1302/2004 Key features and equipment: Codpfx Apozlu N Ujtjhb Robust construction: Thick-walled pressure vessel made of steel, guaranteeing safe operation under load (secured with a locking servomotor-operated hatch). Complete automation system: Control cabinet visible in the photos, with a system of switches, indicators, and an integrated pump power supply system. Included accessories: The machine is sold with the piping system, pneumatic/hydraulic valves (including DN 40, DN 80, DN 200), pressure pump, and auxiliary tank (green) visible in the photos. Documentation: I am including extensive technical documentation with the unit, as shown in the photos, including detailed engineering drawings (sections, locking details), installation diagrams, and valve specifications (including protocols for safety valves set at 0.9 MPa and 1.0 MPa). Technical condition: The unit is used and shows signs of standard industrial operation. The steel structure is in very good technical condition. The machine requires dismantling, re-commissioning, and calibration at the new destination. I encourage you to contact me to arrange an on-site inspection of the machine. I have complete documentation in paper form available for serious buyers to review.

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Cedpsx S Rbvofx Aptshb

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Csdpfxjzpydrs Aptshb Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Cedpfx Apezc N Axetjhb Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Cjdpfoy H I Hlex Aptohb

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, overall weight: 650 kg, pass-through width: 250 mm, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Chedpfxjxhc Tme Aptob Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Coderhilxjpfx Aptjhb Special price €6,500

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Chsdpjzf Iyaofx Aptsb Four-sided impregnation machine + drying tunnel.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Brush air Apache 15 impregnation line, year 2016 (USED, fully operational, taken from the customer from whom it was acquired). Chodpfovy Enhjx Apteb Complete with automatic loading and unloading conveyors.

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Cjdpfxjx R A Tne Aptshb Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet Chsdpfex T Aqfsx Aptjb

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, Chsdpforhidmjx Aptsb located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm Chedpfx Apsw I Hqwjtob