Used In Mould Label for sale (16,586)

Condition: new, Siemens Teleperm M 6DS1603-8RR binary output E Version 1 > unused < in opened original packaging, 100% functional Iijdpfxoz Acwhj Aiyog

Condition: new, Siemens Teleperm M 6DS1702-8AA E10 with C79458-L442-B1 E34-36, unused, in original packaging Iedpoz Acwuefx Aiysig

Condition: new, Siemens Simovert 6SE7022-5FA87-2DA0 braking unit E version C > unused < in opened original packaging, 100% functional Ijdjz Acqnjpfx Aiyeig

Condition: new, SKF 7026 ACD/P4ADGA Precision angular contact ball bearing Bore 130 mm Outer diameter 200 mm Width 34 mm < unused > in OVP 100 % functional Isdpfx Aez Acypoiyoig

Condition: new, Siemens Simovert 6SE7016-4FS87-2DA0 Brake Unit E Version C > unused < in opened original packaging, 100% functional Iisdpfsz Acqhsx Aiysg

Condition: ready for operation (used), Yaskawa CPCR-IN 01B-Y2 Motor Controller, used, normal signs of use, 100% functional Iiodpfsz Adplex Aiyog

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Ijdpfx Aezzz N Hoiysig Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 600 kg, loading space width: 3,000 mm, loading space length: 3,000 mm, loading space height: 2,600 mm, Equipment: lighting, Villex Mikro Wood Pavilion 3.0 – A modern 3x3m space container with an elegant wood look! The Villex Mikro Wood Pavilion 3.0 combines functional space with an appealing wood look – ideal for anyone who values a modern, high-quality, and inviting design. With its compact dimensions of 3.00 x 3.00 m, it offers approximately 9.0 m² of usable space and is perfect as a representative office, reception, meeting room, or practice room, as well as a modern garden office. The combination of panels in a warm wood look and the stylish anthracite (RAL 7016) frame gives the pavilion an elegant appearance that blends harmoniously into any environment. Inspection and collection are possible by arrangement. 🔹 HIGHLIGHTS & DATA AT A GLANCE Model: Villex Mikro Wood Pavilion 3.0 Condition: New & fully assembled External dimensions: 3.00 m x 3.00 m x 2.60 m (L x W x H) Usable area: approx. 9.0 m² (square, optimally usable floor plan) Weight: approx. 600 kg (particularly light, easy to transport & flexible to move) Color concept: Exterior: Warm wood look combined with elegant anthracite frame (RAL 7016) Interior: Bright, modern, and inviting design Insulation: 5.0 cm thick insulation for seasonal & medium-term use 🔹 PREMIUM EQUIPMENT Entrance: Modern, fully glazed entrance door for plenty of daylight and an inviting atmosphere Electrical equipment (ready for immediate use): Connections: 32A CEE heavy-duty power connection Iijdpfx Aiezzyraoysg 3x double sockets for office equipment, laptop & devices 2x LED lights for perfect room lighting 1x light switch & fuse 🛠 CUSTOM MANUFACTURING & SPECIAL REQUESTS POSSIBLE Do you need individual adjustments or additional options? We also manufacture containers to your exact specifications! 🚚 DELIVERY & PAYMENT Delivery: Nationwide delivery with our own special vehicles / crane truck Delivery time: In-stock standard models: approx. 1–2 weeks Individual special production: approx. 4–6 weeks Payment options: PayPal Bank transfer (advance payment) 📞 REQUEST A NON-BINDING QUOTE NOW! Get free advice! Write to us directly via the online platform or call us – we will create your individual offer.

Condition: new, functionality: fully functional, With this offer, you are purchasing a new Kyocera TaskAlfa 8353ci colour multifunctional system. Item for sale: 1 x Kyocera TaskAlfa 8353ci with the following features: Isdpsxrbrcefx Aiyeig Includes original packaging. Condition: This offer is for a new device that has not yet been used. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter Iijdpfx Aouiq Dhoiysg • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Ferwood Code: RU0011132 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG KAL 210/310/370 EDGEBANDER - If interested we offer a revision service, contact us. Iiodjv I Acfepfx Aiyjg

Condition: new, Siemens C98043-A1210-L20 Simoreg board with accessory set C98043-A1210-D2-1 < unused > in opened original packaging, 100% functional Iedpfx Aijzzhrheyeig

Condition: new, Siemens C98043-A1005-L2 FBG control set, unused, in sealed original packaging, 100% functional Iijdpfx Ajzzhqweiyeg

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz Iisdpfx Ajzx Hkkjiyeg delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2024, Labeling machine, Novexx – used: Price at location: €1,950.00 (net), including loading! Additional Novexx solution thermal ribbon Avery Novexx 64-04 A2817: €425.00 (net) per piece. Manufacturer: Novexx Year of manufacture: 2024 Type: A2817 Serial number: CLG22X-00063 R = 1348 Ohm PRINT PARAMETERS Print speed: 8.0 inches/s Iijdezxcdtepfx Aiyjg Feed speed: 8.0 inches/s Material type: Die-cut Material length: 143.0 mm Material width: 99.0 mm Print orientation: Front first Die-cut offset: 0.0 mm Barcode multiple: *1 UPC clear text: Bottom EAN clear text: Standard EAN separators: Only with clear text Rotated barcodes: Optimized Dispense mode: True 1:1 mode Dispense position: -5.0 mm X print offset: 2.4 mm Y print offset: 1.0 mm Die-cut mode: Automatic Die-cut threshold: 128 Condition: good Available: immediately Location: Erfurt area, later Frankenberg / Saxony warehouse

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Scope of delivery: Sleeve labeling machine Iiedpfx Aijxvbz Eoyeg Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: If interested, individual machine components or assemblies can also be purchased separately. Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Iedscuwptjpfx Aiyjig Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 06/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED STAINLESS STEEL INSULATED TANK, NON-DETACHABLE, FORMERLY A SINGLE-COMPARTMENT MILK TANK WITH NON-FUNCTIONING REFRIGERATION UNIT REF: 25-U-169 TYPE: stainless steel tank OVERALL DIMENSIONS Iiodpezc Scnsfx Aiyog TOTAL TANK LENGTH: 4.00 m TOTAL TANK WIDTH: 2.10 m TOTAL TANK HEIGHT: 2.10 m TOTAL TANK VOLUME: 13,600 liters COLOR: steel. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of selling and purchasing industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and detachable equipment. With a readily available fleet of over 50 trucks and over 150 containers, including those with and without cranes. S.E.&O Given the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: excellent (used), Automatic labeler, label applicator Zebra 110PAX4 /ct1899 Iiodpetrly Dofx Aiyjg Manufacturer: Zebra Type: 110PAX4 The product comes with full documentation and software.

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Ijdpfx Aofp A I Esiyoig Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: used, machine/vehicle number: A-IC1231, Year of construction: 2020, operating hours: 668 h, load capacity: 1,300 kg, load center: 600 mm, fuel type: electric, mast type: other, battery voltage: 25.6 V, fork length: 1,150 mm, overall weight: 179 kg, 5186962 Serial Number: 90551340 Isdszfgbvjpfx Aiyeig Battery Details: Li-Ion Batterie 25,6V/50Ah Internationaler Transport möglich/ International delivery available

Condition: good (used), Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 Iiedoxukgujpfx Aiyeg 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Details available upon request. Iedpfozyc Disx Aiysig

Year of construction: 2014, condition: used, Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible. Iijdpfx Aijz Dkh Ioyeg

Condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Isdpez Dkh Usfx Aiyeig