Used Index V 200 for sale (150)

Condition: used, Year of construction: 2013, operating hours: 30,431 h, INDEX ABC 65 Distance between main and sub spindle: approx. 250 mm Main spindle: Bore diameter: 65 mm Maximum speed: 6,000 rpm Power: 25 / 35 kW at 80 / 120 Nm Chuck diameter: 160 mm Bearing ISO 702/1 diameter: 140 mm C-axis Upper turret: 10 stations Maximum spindle speed: 12,000 rpm Power: 7.5 kW at 11.25 Nm Travel X / Y / Z: 140 / ± 50 / 300 mm Rapid traverse X / Y: 30 / 50 m/min Bdsdpfxeymbp Se Aqloc Lower turret: 9 stations Maximum spindle speed: 12,000 rpm Power: 9 kW at 10 Nm Travel X / Y / Z: 140 / ± 50 / 300 mm Rapid traverse X / Y: 30 / 50 m/min Sub spindle: Bore diameter: 52 mm Maximum speed: 6,000 rpm Power: 5 / 9 kW at 10.5 / 20 Nm Chuck diameter: 110 mm Travel X / Y: 140 / 300 mm Rear machining units: 8 units including 5 driven stations Maximum spindle speed: 12,000 rpm Power: 6.4 kW at 7 Nm Workpiece and part handling unit with gripper: Stroke X approx. 1,580 mm Speed: approx. 68 m/min Rotation angle: approx. 33° Max. diameter: 65 mm Max. weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space including bar feeder and coolant/filter unit: approx. L x W x H 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 30,431 h Hydraulic hours: 28,806 h Scope of supply: INDEX MBL bar feeder KNOLL KF 150 coolant filter unit KNOLL 320 S-1/160 chip conveyor

Condition: used, Year of construction: 1994, operating hours: 62,283 h, bar diameter (max.): 26 mm, spindle bore: 230 mm, total width: 1,500 mm, total length: 7,000 mm, total height: 2,000 mm, INDEX MS 25E Maximum bar diameter round / square: 26 / 18 mm Spindle circle diameter: 230 mm Max. bar length: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Voltage: 400 V / 50 Hz Operating hours: 62,283 h Working hours: 4,916 h Dimensions (incl. bar guide): approx. L x W x H 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: Bjdpfjymdchsx Aqlodc INDEX MS 25E machine

Condition: used, Year of construction: 2000, INDEX MS42C Maximum bar diameter: 42 mm Spindle pitch circle diameter: 320 mm Main spindle: Power clamping with INDEX spring-loaded hollow clamping cylinder and collet Maximum clamping stroke: 4 mm Clamping force: 26 kN Main spindle drive: Rated power: 5 kW Rated speed: 1,500 rpm Rated torque: 32 Nm Maximum speed: 5,000 rpm Synchronous spindle and rotary tool holder: Rated power: 5.3 kW Bodpfsymc S Ujx Aqledc Rated speed: 1,500 rpm Rated torque: 34 Nm Maximum speed: 5,000 rpm Cross slides: Max. number: 10 Travel (X): 70 mm Travel (Z): 140 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Max. feed force +Z: 11.4 kN Max. feed force −Z: 7.9 kN Rapid traverse: 15 m/min Longitudinal spindles: Quantity: 6 Stroke (Z): 240 mm Max. feed force +Z: 15.1 kN Max. feed force −Z: 11.6 kN Rapid traverse: 15 m/min Longitudinal slide units: Max. number: 6 Travel (X): 70 mm Max. feed force +X: 11.4 kN Max. feed force −X: 7.9 kN Rapid traverse: 15 m/min Synchronous spindle: Chuck system: spring-loaded clamping cylinder Maximum clamping diameter: 42 mm Chuck outside diameter: 112 mm Jaw stroke: 1 mm Max. total clamping force: 13 kN Weight: approx. 11,000 kg Scope of delivery: KNOLL KTS 32-48-T hydraulic unit CUCCHI PLURIMANDRINO bar feeder, year 2000 Workshop cabinet with machine accessories KNOLL VRF 500 KNOLL 400 S-1/250 chip conveyor

Condition: used, Year of construction: 2014, operating hours: 18,384 h, INDEX ABC 65 Distance between main and sub-spindle: approx. 250 mm Main spindle: - Bore: 65 mm - Max. speed: 6,000 rpm - Power: 25 / 35 kW at 80 / 120 Nm - Chuck diameter: 160 mm - Bearing ISO 702/1 diameter: 140 mm - C-axis Upper turret: - 10 stations - Maximum speed: 12,000 rpm - Power: 7.5 kW at 11.25 Nm - Travels X / Y / Z: 140 / ±50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Lower turret: - 9 stations - Maximum speed: 12,000 rpm - Power: 9 kW at 10 Nm - Travels X / Y / Z: 140 / ±50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Sub-spindle: - Bore: 52 mm - Max. speed: 6,000 rpm - Power: 5 / 9 kW at 10.5 / 20 Nm - Chuck diameter: 110 mm - Traverse X / Y: 140 / 300 mm Bdjdpsymblaofx Aqloc Backworking units: - 8 units including 5 driven stations - Maximum speed: 12,000 rpm - Power: 6.4 kW at 7 Nm Workpiece and cut handling unit with gripper: - Stroke X: approx. 1,580 mm - Speed: approx. 68 m/min - Rotation angle: approx. 33° - Max. diameter: 65 mm - Max. weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space including bar loader and coolant/filter unit: approx. L x W x H 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 18,384 h Hydraulic hours: 16,694 h Scope of delivery: - Bar loader INDEX MBL - Coolant filter unit KNOLL KF 150 - Chip conveyor KNOLL 320 S-1/160 - Additional cooling unit KLH SC 8.K2L. MT-00-IND

Condition: used, Year of construction: 2007, operating hours: 26,721 h, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, total width: 1,800 mm, total length: 3,200 mm, total height: 2,850 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 12 mm, travel distance Z-axis: 85 mm, rotational speed (min.): 10,000 rpm, overall weight: 6,500 kg, INDEX MS 22C Work Spindles: Quantity: 6 Maximum bar diameter: 22 mm Spindle pitch circle diameter: 230 mm X / Z travel: 62 / 85 mm Rapid traverse: 15 m/min Synchronous hollow spindle drives: Quantity: 6 Maximum speed: 10,000 rpm Nominal speed: 8,300 rpm Power: 15 kW at 18 Nm Chuck diameter: 110 mm Rotating synchronous spindles: Quantity: 2 Z stroke: 120 mm Feed force: 2.5 kN Rapid traverse: 15 m/min Rotational angle: 132° Counter spindle: Bdodpfjymaw Ijx Aqlsc Maximum speed: 10,000 rpm Nominal speed: 8,000 rpm Power: 9.2 / 12 / 14 kW at 11 Nm Tool carriers: Maximum quantity: 11 X / Y / Z travel: 62 / ±12 / 85 mm CNC control: C 200-4D (Siemens Sinumerik 840D) Dimensions (approx. L x W x H): 3.2 x 1.8 x 2.85 m Weight: approx. 6.5 t Operating hours: 61,997 h Machining hours: 42,235 h Scope of supply: INDEX bar feeder Bar feeder IEMCA SIR MS22 P, year 2008 Coolant unit with belt filter Chip conveyor KNOLL 400 S-1/290 Coolant filtration unit KNOLL FKA/1780 RSF 100 Workshop cabinet with machine accessories

Condition: ready for operation (used), Machine in good operating condition Bjdpfx Asy Rnfvoqlodc

Condition: ready for operation (used), Machine in good operating condition Bedpjy Rnd Ejfx Aqljdc

Condition: ready for operation (used), Machine in good operating condition. Bdsdpfey Rnczjx Aqlsc

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device Bdodov Raatspfx Aqloc - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.5/15 [kW] NUMERICAL AXES - Slide unit 1.1 : X and Z axes controlled by NC - Slide unit 1.2 : X and Z axes controlled by NC - Slide unit 2.1 : X and Z axes controlled by NC - Slide unit 2.2 : X and Z axes controlled by NC - Slide unit 3.1 : X and Z axes controlled by NC - Slide unit 3.2 : X and Z axes controlled by NC - Slide unit 4.1 : X and Z axes controlled by NC - Slide unit 4.2 : X and Z axes controlled by NC - Slide unit 5.1 : X and Z axes controlled by NC - Slide unit 5.2 : X and Z axes controlled by NC - Slide unit 6.1 : Z axis controlled by NC - Slide unit 6.2 : X and Z axes controlled by NC POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 77 [kW] WEIGHT & DIMENSIONS Bedpfxsyzi Ume Aqlodc - Machine floor space : 3329 x 2032 [mm] - Machine height : 2654 [mm] - Machine weight : 7100 [kg] MACHINE HOURS - Number of hours under power : 36508 [h] - Number of working hours : 26721 [h] - Number of spindle hours : 20860 [h] EQUIPMENT - CNC : Siemens 840D SL - Double NCU - Cutting force monitoring: ARTIS - Chips conveyor - Coolant tank * with high-pressure pump : 80 [bars] - Bar loader : IEMCA SIR mS22P/33 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: ready for operation (used), A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement. Bdsdpjy Tx Srsfx Aqlsc

Year of construction: 1994, condition: ready for operation (used), A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement. Bdedsy Tx Sfepfx Aqlec

Condition: ready for operation (used), Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement. Bdedpfx Aoy Tx N Rjqlsc

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 190 mm, travel distance Z-axis: 350 mm, overall weight: 2,100 kg, number of axes: 2, This 2-axis Index ABC 63 was manufactured in 1999. It has a rated power of 13 kW and a machine weight of approximately 2100 kg. If you are looking to get high-quality turning capabilities, consider the Index ABC 63 horizontal turning machine we have for sale. Contact us for further details. • Mains voltage: 400 V • Control voltage: 24 V Bdedjy Iwrmopfx Aqloc • Frequency: 50 Hz • Rated power: 13 kWThe Axis travels are approximetaly Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 270144, MS22C including bar feeder Cucchi PB24/3300 Knoll lubrication system VRF 500 with chip conveyor Kraft und Bauer fire extinguishing system The machine has 11 cross slides and a synchronous spindle. Bsdoy Sxm Hepfx Aqlsdc Included are: 5 turning holders 1 double holder 2 tailstocks with collet chucks Bar feeder parts for Ø20 The machine can be inspected while powered on. The operating hours are not accurate. They realistically correspond to approximately 10.5 years of operation in a 3-shift system. We need to free up the space, so we would like to sell the machine as quickly as possible.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 590 mm, turning diameter: 270 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 215 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, bar diameter (max.): 90 mm, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this INDEX G300Y/B CNC turning and milling center, manufactured in 2000 and completely overhauled in 2020, for sale. Machine type: INDEX G300Y/B Machine number: 500087 Overhauled: 04/2020 Bjdpfx Aoy Sz Akeqlsdc Power supply: 3~ Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 120 A Please refer to the attached PDF for detailed technical data. The machine includes a parts handling system with a conveyor belt on the counter-spindle side. The electrical system has been completely renewed, and the machine is running on Sinumerik one. We acquired this machine to gain initial experience in the field of turning/milling centers. We are now acquiring a new machine, and once it is installed and in production (Q4/2026), the G300 will be available for sale. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, CNC multi-spindle lathe Manufacturer: INDEX Machine model: MS 42C Control: Siemens SINUMERIK 840C Year of manufacture: 2002 Number of controlled axes: 12 Number of spindles: 6 TECHNICAL DATA Spindle - Bar passage (mm): 42 - Max. speed (rpm): 5,000 EQUIPMENT FEATURES Bdsdpfx Aqsy Ak S Nslsc + 12 linear axes + Central coolant system + Central automatic lubrication

Condition: excellent (used), Year of construction: 2000, INDEX ABC 60 Spindle automatic CNC operational, fully functional Year: 2000 Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Technical details: 1-Spindle Automatic CNC Fized Headstock Lathe Serial number 400290 control SIEMENS 840 C passage: 65 m tool turrets with driven tools: 2 front and rear side machining chip conveyor: KS SRF 040.00 Bar loading: SCHMID LN 3200 Weight machine: 3500 kg. Overall size: 6500 x 1500 x 1800 mm. Bdsdpfx Aey Nycdsqljc We are waiting for you in H.B.R. srl - ITALY

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 23109, CNC 6-Spindle Lathe Index MS42C Year of manufacture: 1998, Serial number 23109 Control: Index Bar loader: Index/Hydag Maximum bar diameter: 42 mm Bdodpoyzicwefx Aqloc Chip conveyor and fleece filtration system: Knoll CO2 extinguishing system: Kraft & Bauer ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing solutions that suit your needs. Whether you prefer a down payment, installment plan, or custom financing model – together we will find the right solution. Upon request, we will also handle the entire transportation logistics for you. From planning to reliable delivery, we ensure a smooth and timely process so that you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We offer you professional and personalized advice.

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Hainbuch Spanntop Axfix D22 ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled - Slide unit 6.2: X-axis and Z-axis NC-controlled Synchronization device, position 6.1 Bjdpfeyymbzjx Aqledc Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Coolant cleaning system Hinged belt chip conveyor Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: excellent (used), Year of construction: 2007, operating hours: 77,264 h, functionality: fully functional, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 6-spindle machine Part discharge via chute at spindle position 6 Option for polygon turning Collet holders renewed Chip conveyor Magazine IEMCA SIR MS 22 C / 33 P Bdjdpfx Aqsyymadslsc

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,245 mm, spindle motor power: 9,400 W, total height: 2,100 mm, total width: 2,150 mm, overall weight: 8,330 kg, product length (max.): 7,250 mm, number of axes: 7, This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details. • Power supply: 3 phase / 50 Hz • Rated voltage: 400 V • Control voltage: 24 V • Rated current: 120 A • Rated power: 67 kW • Electrical cabinet weight: 710 kg • Spindle bore: 65 / 90 mm • Spindle bearing diameter (front): 110 / 140 mm • Spindle nose: ISO 702/1 size 6 / 8 • Chuck diameter: 200 / 250 / 315 mm • Maximum turning diameter: 270 mm • Maximum swing diameter: 590 mm • Power (100% duty cycle): 19 / 28 / 43 kW • Power (40% duty cycle): 28 / 40 / 57 kW • Torque (100% duty cycle): 120 / 178 / 275 Nm • Torque (40% duty cycle): 178 / 255 / 363 Nm • Maximum speed: 5000 / 3500 rpm • Counter spindle bore: 65 / 90 mm • Counter spindle bearing diameter: 110 / 140 mm • Counter spindle nose: ISO 702/1 size 6 / 8 • Counter spindle chuck diameter: 200 / 250 / 315 mm • Counter spindle power (100%): 19 / 28 kW • Counter spindle power (40%): 28 / 40 kW • Counter spindle torque (100%): 120 / 178 Nm • Counter spindle torque (40%): 178 / 255 Nm • Counter spindle max speed: 5000 / 3500 rpm • Minimum distance between spindles: 20 mm • Longitudinal travel: 770 / 1310 mm • Rapid traverse: 22.5 m/min • Rapid traverse X: 24 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 24 m/min • Tool system: VDI 30 • Number of tool stations: 12 • Max boring bar diameter: 50 mm • Milling spindle speed: up to 6000 rpm • Milling spindle power: 9.4 kW • Milling spindle torque: 19 Nm • Tailstock stroke: 630 mm • Tailstock quill diameter: 125 mm • Tailstock force: 7500 N • Hydraulic tank: 165 liters • Coolant tank: 300 liters Bdedpsyyyy Dofx Aqlec Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2009, Technical details: turning diameter: 270 -300 mm turning length: 710 mm total power requirement: 43 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,16 x 2,15 x 2,15 m Bdedpfx Ajw Dud Esqloc The machine does not include a chuck or tools – the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one. *

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! Bdedpfxsxc Idmj Aqljc *

Condition: used, Year of construction: 2008, Out of valve production * Bedeynkgvopfx Aqledc