Used Injection Moulder for sale (2,528)

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Bljdpfezxk Rusx Abtjl Machine No.: 61019432 Machine weight: 18,500 kg Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. Bjdpfxswb Dl Te Abtoll The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. • The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000. The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. Bodpfx Absy I R Tqjtell +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Bedpfx Aezt I Srjbtjll Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Bjdpezw H Dbjfx Abtjll Included: External control panel for access requests and emergency chain reset.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Bsdpfezt I Rnsx Abtjll Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). Bsdozww D Sspfx Abtoll The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. You can find an exact specification in the documents. Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Injection unit .../675 Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Bljdpfx Ajzt Ikbsbtjl Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivotable from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivot angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivot angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence separately, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Stop with lifting device, pivotable to the side (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Folding stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert strips. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Bedpfszbm Tfox Abtsll Feed socket, switchable from the control unit. Comfort stand with electrically height-adjustable feed support, which can be pivoted to the side for machine maintenance and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Blodpfx Abezt Ih Tjtsl Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Bjdozxrd Aepfx Abtoll

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Blodpozg T I Sefx Abtel Total weight: approx. 2,300 kg

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm Blsdpfjzwhdijx Abtsl - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Blodpfxezw Azve Abtjl Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm Bljdpfxszwwd Ej Abtel - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing Bedpfx Aezu Awrjbtjll

Condition: used, Year of construction: 1999, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Colour: Grey Empty weight: 900 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 126-02049 Bedpfx Abownigcetjll - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Number of speeds: 2 - Voltage [V]: 380 - Current consumption [A]: 12 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 226 500123, Weinig four-sided planer in good, used condition. Quattromat 22 – Year of manufacture 1991 Accessories: 4 planing heads The planing machine was used for many years in solid wood production. The machine is being sold as part of the liquidation of our carpentry business. Blsdpfeziu I Ejx Abtel Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 1988, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Bljdezq Dc Ispfx Abtel Swivel adjustment: electric Stop adjustment: manual Height indicator: scale Swivel angle indicator: scale Milling stop indicator: scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 Motor power: 6 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1,200 mm Machine width: 1400 mm Weight: 1100 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 27,000 kN, screw diameter: 60 mm, clearance between the columns: 6,30,570 mm, injection weight: 760 g, MACHINE IN PERFECT CONDITION, AVAILABLE FOR ANY INSPECTION. Bljdpfxszw D Eie Abtsl

Condition: used, Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, injection pressure: 1,946 bar, mold height (min.): 660 mm, ejector force: 69 N, ejector stroke: 180 mm, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 10,950 kg, The machine is currently in production, but it will need to be relocated soon as it is being replaced. Bljdpfx Abjzub Ntstel

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Bodszxqycopfx Abtjll Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Blsdpfx Abozx Hkkstjl

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm Blodpfsynl N Sox Abtol Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit Bodpfx Ajzvwl Tebtjll • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t