Used Injection Plastik for sale (1,774)

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Nedpfx Abexu E E Sebowp Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, A Plasmek Plastic Makinalari LM500 W6-P wrapping machine is for sale due to lack of use. The machine has virtually zero operating hours and has not been used. All parts and accessories are included. Nwjdpfx Abow H Rpvebep

Condition: excellent (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 21.1605, 21.1702, 21.1600, 21.1682, type of input current: three-phase, Complete line for rigid plastic for washing, drying and remove fluff and dust, with a 1.5-2 tones / hour productivity: - sink-float water tank - horizontal friction washer - mechanical cleaner and dryer - zig-zag classifier and big-bag loading system - electric control panel for entire system The parts that come into contact with water are made of stainless steel or hard steel. Machines with a ladder and a pedestal for inspection (sink-float water tank and horizontal friction washer) allow installation on both sides, also the machines in the line allow rotation relative to each other, the line can be I or L or U shaped. The line is perfectly functional, very little used, it was purchased for a project that did not materialize. Nwjdpfx Abowpm U Tebjp

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, screw diameter: 30 mm, injection pressure: 2,500 bar, opening stroke: 500 mm, plate length: 570 mm, TECHNICAL DETAILS Clamping force: 1,000 kN Nwsdpfx Absxx T Dwobep First injection unit Screw diameter: 30 mm Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Second injection unit Screw diameter: 25 mm Shot weight: 45 g Shot volume: 54 cm³ Injection pressure: 2,500 bar Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Opening stroke: 500 mm Maximum daylight between platens: 850 mm Mold height: 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4.63 x 1.3 x 3.9 m Weight: 4,000 kg Connected load: 125 A EQUIPMENT 2 x core pull (simultaneous movement, adjustable holding pressure) Intermediate stop for hydraulic rotary control CF card drive Host computer interface Input device interface Conveyor belt interface Machine prepared for Multilift Selector unit with connection Installation height expanded to 350 mm Highly wear-resistant screws Connection for air blow-off device 2-color / horizontal-vertical injection unit Includes disks/CF cards – complete documentation/manuals

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Nwsdpfx Asxyizhebbsp Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2007, operating hours: 64,291 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,595 bar, installation height: 300 mm, TECHNICAL DETAILS Clamping force: 1,200 kN Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 1,595 bar Platen size: 740 mm x 470 mm Minimum mold height: 300 mm Maximum platen distance: 800 mm Opening stroke: 507 mm Nedpexzfl Sefx Abbewp MACHINE DETAILS Control system: CC100 Dimensions & Weight Machine dimensions (L x W x H): 4.35 m x 2.2 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,291 h EQUIPMENT Screen language German & English CEE socket 16 A Hydraulic core pull 2x Handling unit Conveyor belt Safety enclosure Levelling elements EUROMAP 12 interface Interface for ejector plate monitoring Schuko socket 10 A

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Nodpfoxgwa Ssx Abbewp Injection Moulding

Condition: excellent (used), Sumitomo Demag IntElekt 50/370-80 / Electric machine Year of manufacture: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Injection pressure: 1580 bar Metering volume: 44 ccm Clamping unit: Clamping force: 50 t tie bar distance: 370x370 mm size of clamping platens: 520x570 mm Nwsdpfexqx Ixox Abbop ejector: electric clamping unit: toggle lever control: NC5 - touch screen Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface Air valve x 4 Control with hot runners Injection unit hardened - bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/width/height: 4.20x1.26x1.84 m Drive: Heating power: 5.7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Dimensions & Weight Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Display language: German CEE socket 16A Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Nedpjxzfkbsfx Abbjwp Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,305 h, General Data Machine weight 3300 kg Measurements height 2020 mm Dimensions Machine Length 3920 mm Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 700 kN This Arburg 370 S 700-290 U was manufactured in 2015. It features a screw diameter of 40 mm, injection weight of 172 g, and a clamping force of 70 t. The tiebar spacing is 370 x 370 mm, with clamping platens measuring 510 x 510 mm. Ideal for precision hydraulic injection moulding, consider the opportunity to buy this Arburg 370 S 700-290 U hydraulic injection moulding machine. Contact us for more information. Nwedpfx Abjxy Aqpebsp Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Nsdpfx Aboxqx Aiobowp Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Tie bar distance: 520 mm Shot volume: 392 cm³ Injection pressure: 2,000 bar Mould height (h x v): 520 x 520 mm Platen size (h x v): 728 x 728 mm Minimum installation height: 250 mm Maximum platen opening: 900 mm Opening stroke: 650 mm Njdpfx Aoxzfh Tobbjwp MACHINE DETAILS Control system: Selogica Dimensions & Weight Machine dimensions (L x W x H): 5.45 m x 1.95 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,218 h EQUIPMENT Screen language: German CEE socket 16A Hydraulic core pull 1x Pneumatic core pull 1x Air valve 1x Water battery Levelling elements EUROMAP 12 interface Interface for handling Schuko socket 10A Mould heating 12x Note: Machine is sold without material hopper.

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of manufacture: 2015 injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Metering volume: 169 ccm Clamping unit: clamping force: 90 t tie bar distance: 470x420 mm size of clamping platens: 680x660 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24.000 in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter -energy saving Proportional valve on the injection unit -precise injection There is a possibility to purchase the machine with robot or manipulator Dimensions: Weight: 4100 kg Length/width/height: 4.18x1.42x2.18 m Drive: Pumps/motor: 15 kW Nwjdpoxqx Ewefx Abbep Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! Nwsdpfsxzfg Nox Abbjp The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Nsdpfx Aboxqx Ilobjwp Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Nodpexzd R Tofx Abbswp Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Condition: excellent (used), Year of construction: 1998, Arburg 270C 500-100 Year of manufacture: 1998 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit : clamping force: 50 t tie bar distance: 270x270 mm size of clamping platens: 446x446 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Nsdjxqx Ufjpfx Abbjwp Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal The machine has an additional control panel - control by remote control The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 2200 kg Length/width/height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,3 kW Total power: 21,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Nwedpfxoxzd Nvo Abbjp Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: excellent (used), Year of construction: 1995, Arburg 370C 600-100 Year of construction: 1995 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Nwsdpfx Abexqya Nobsp Clamping unit: Clamping force: 60 t Distance between tie bars: 370x370 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Air valve x 1 Hydraulic core pull x 2 Dimensions: Weight: 3600 kg Length/width/height: 4.30x1.59x2.08 m Drive: Pumps/motor: 11 kW Heating output: 4.2 kW Total output: 15.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Nwsdpsxzd Ixofx Abbjp Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: excellent (used), Year of construction: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: November 2011 Njdjxqyb Hepfx Abbjwp Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 cc Clamping unit: Clamping force: 60 t Type distance: 370 x 370 mm Clamping platen size: 510 x 510 mm Ejector: electric Clamping unit: toggle-type Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control system with hot runners x 12 Hardened injection unit - bimetal Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by the servo motor Driven by an inverter Machine with cylinder/battery with compressed nitrogen (additional charging for fast work) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68 x 1.45 x 2.04 m All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 370H 600-290 e² / Hybrid Machine Year of manufacture: 03/2012 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA - Touchscreen Additional equipment: Nwsdoxqyb Tepfx Abbjp Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robotics interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit – bimetallic Main motor – driven by servo motor with inverter – energy-efficient Injection unit is powered by a servo motor controlled by an inverter Proportional valve on the injection unit – precise injection Automatic mold height adjustment Central lubrication Machine with cylinder / battery with compressed nitrogen (extra charge for rapid operation) Integrated sorting flap Dimensions: Weight: 3350 kg Length/Width/Height: 4.00 x 1.46 x 2.04 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you may participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m Nwodpfx Ajxqyhmjbbep All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 1300V/315 V-R / Vertical injection molding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Nwedpfx Absxqyh Hebjp Clamping force: 130 t Distance between tie bars: 454x740 mm Size of the clamping platens: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/width/height: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating output: 8.98 kW Total output: 27.48 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Njdpexqyh Tsfx Abbowp Price: On request