Used Internal Gauge for sale (10,551)

Condition: good (used), Year of construction: 2011, functionality: fully functional, total width: 2,250 mm, total length: 11,000 mm, total height: 2,550 mm, Autoclave for rotary retreading SCHOLZ Kjdpfx Aaotph H Ssnjnf year 2011, in good condition, dismantled and stored type of heating: steam (steam generator not included) length: approx. 11000 mm width: approx. 2250 mm height: approx. 2550 mm total weight: approx. 7000 kg internal diameter: 1650 mm cylindrical length: 9500 mm usable length: 24 tires

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm Knsdjxzuzcepfx Aanef weight of the machine ca. 2,25 t

Condition: ready for operation (used), Vertical Grinder Matra Schneider RH 3/800 Rotary table diameter: 1000 mm grinding height: 1000 mm workpiece height: 1000 mm grinding wheel diameter: 300 mm Ksdpfxjxx R Dbe Aansnf total power requirement: 30 kW machine weight approx. 12 t

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Knjdpfx Aeupbf Doanjf Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Ksdpfx Aajxyllvenenf

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout Knedew Rdt Iepfx Aansf • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Year of construction: 2019, condition: used, machine/vehicle number: IntNr231388, Technical Description – PERO RO Industrial Solvent-Based Parts Cleaning System The PERO RO is a high-performance industrial parts cleaning system designed for the effective and environmentally friendly cleaning of workpieces and components using solvents. It is suitable for a wide range of applications within the metalworking industry and ensures high cleanliness standards while maintaining economic operation. Features: Kodpsxxvrdjfx Aanjnf • Cleaning with organic solvents (e.g. hydrocarbons or modified alcohols) • Closed-loop process with integrated solvent circulation • Suitable for small to medium batch sizes and varying component geometries • Automated process control for repeatable cleaning results • Robust construction for continuous industrial operation Typical Applications: • Degreasing of turned and milled parts • Cleaning before assembly or coating • Removal of coolants, oils, and particulates The machine can be inspected under power by prior arrangement. Specification and data subject to change and error, prior sale reserved!

Condition: like new (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TH117-110-020467, operating hours: 1 h, ABUS ELK overhead crane, crane runway, bridge crane, indoor crane, crane Load capacity / lifting capacity: 5t - 5000KG Span: 18,249 mm, overall external dimension approx. 18,400 mm Kjdpox Evvxefx Aanonf Year of manufacture: 2013, with pendant control Lifting height: 6 m Overall height from top edge of crane to hook approx. 1,240 mm (beam 760 mm + hoist 480 mm) End carriage length with buffers approx. 3,210 mm SWP: Used full load hours 1 hr, Theoretical remaining service life 1,599 hrs Crane is dismantled and available immediately Very good condition – almost like new, inspection book is available Column-mounted and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please request by postal code Collection preferred

Condition: excellent (used), EUR 250.00 per piece, height-adjustable from 0.68 m to 1.1 m Ksdpfx Aex Dy H Ajanjnf 2 rollers, total width 260 mm Roller diameter: 108 mm

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) Knedpohgnd Ajfx Aanef - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: used, STUDER CT 960 is an Internal grinding machine delivering precision, high accuracy and reliable performance. Working capacities: centre height 150 mm, grinding length 150 mm, X/Z travels 400 mm, wheel diameter 250 mm, spindle hole 35 mm; B-axis +61/-91°, rotatable head -5/+275°, turret with 4 spindles. Main specs: spindle speeds 6000 / 45000 / 60000 / 90000 rpm; X/Z feeds 12 m/min; air 6–10 bar; 3x 400 V 50 Hz; total power 34 kVA; weight ~4050 kg; dimensions L 3218 × W 2256 × H 2300 mm. Equipment: coolant system, measuring probe, diamond redresser, spindle cooling, flanges for internal grinding, tool holders, 3-jaw chucks Ø100/125/160, magnetic chuck Ø125/300, tool cabinet, lamp, fire system, electronic handwheel, external grinding spindle 6000 rpm, calibration accessories. Enables tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Knedpfx Aaoxx U Auonef

Condition: excellent (used), Professional measuring station from the renowned brand DIATEST Germany, equipped with a precision digital indicator Mitutoyo ID-C112B (Code No. 543-250B). The set is intended for precise measurement of heights, depths, diameters, clearances, or rolling elements in measurement labs, workshops, and quality control departments. • Base manufacturer: DIATEST Germany • Indicator: Mitutoyo ID-C112B / Code No. 543-250B • Measuring range: 12.7 mm • Resolution: 0.001 mm • Functions: "ZERO/ABS", "HOLD", "mm/inch" • Sturdy cast iron base with adjustable table • Technical condition: very good, functional, ready for use • Minor signs of use on the base's paint The price refers to one piece (complete set: base + Mitutoyo indicator). Knodpfx Aasxuibwonof Shipping or personal pickup possible.

Condition: used, Year of construction: 1983, Min./max. diameter of ground bore: 10-250 mm Max. grinding length: 500 mm Max. swing diameter: 400 mm Max. workpiece length: 1,000 mm Workhead spindle speed: 25-450 rpm Knedsx Alaljpfx Aanef Grinding spindle speed: 8,800-31,000 rpm Workhead swiveling range: 15° Total power requirement: 9 kVA Machine length x width: 4,400 x 2,020 mm Total machine weight: 4,400 kg

Condition: good (used), Hagen & Goebel HC 22 E / Thread Cutting Machine - Speed range: 56 - 355 rpm - Table dimensions: 600x500 mm - Year of manufacture: 1988 Knodpfx Ajx Edbmsanjf Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: used, functionality: fully functional, Year of construction: 2000, Internal broaching machine Kjdpfx Aetpmnrsanenf Make: Arthur Klink Type: RISH 10x1000x400 Year of construction: 2000

Condition: used, Year of construction: 2008, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm Control FANUC 320iA 3 x internal grinding spindles 2x HV-X 100-90000/3 Housing diameter: 100 h5 mm Spindle speed max: 90000 min/1 Nominal/max. power: 2.5/3.0 kW Spindle nose: D10/18 Spindle cooling: Water 1x HS80c 120000/1.1 Housing diameter: 80 h5 mm Spindle speed max: 120000 min/1 Nominal/max. power: 0.8/1.1 kW Spindle nose D06/12 Spindle cooling: Water 1 x external grinding spindle: MMO-100 HSK-C50/4 Diameter: 100 h5 mm Maximum speed: 3770 min/1 Nominal/max. power: PS1/PS6 - 6.0/7.0 kW Clamping system: HSK-50/M12 Grinding wheels: Diameter 125-200 x 2-20 mm 1 x dressing spindle MHF-72 D40/16 Housing diameter: 72 h6 mm Maximum speed range: 16000 rpm Power S1/S6: 400/500 W Spindle nose: 40 mm/8xM5 on TK 56 mm Spindle nose: 40 mm/4xM5 on TK 32 mm 1 x measuring probe (longitudinal positioning) Etamic C25 Abrichteinheit für das automatische Abrichten mit Hydraulisch einschwenkbarem Arm. Präzisions Positionierung und Einrastung mittels Konischem Bolzen, geschliffen und gehärtet. Schwenkbewegung : Hydraulisch Schwenkgeschwindigkeit : Einstellbar 1 x Messtaster (Längspositionierung) Etamic C25 Knjdpfx Asx Dxw Heanof X-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut Z-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut B-Achse Fahrweg: +60°..- 91° Auflösung Winkelmessgeber: 0.0005° Auflösung Antrieb: 0.0001° Vorschub: 25°/Sek Messung: Winkelmessgeber Absolut Revolver Anzahl Position 4 Zeit beim Wechseln 5 Sek Möglicher Spindeldurchmesser: 0 100 mm Werkstück- Spindeldrehzahl max.: 1'000 min-1 Spindelstock Leistung max.: 1.8 kW 960-41 Spindelnase: A2.4/MK5 Ausrüstung Anschnitterkennung Anschnitterkennung und Prozessoptimierung zur Optimierung des Schleif- und Abrichtprozesses und zur Verkürzung des Luftschleifens. Signal über Körperschallsensor auf dem Werkstückspindelstock aufgebaut, bestehend aus: -1x AE-Auswertsystem mit Display AE4100 -1x Kabel -1x Software und Anbauaufwand inkl. Material Sensor und Empfänger für Abrichtspindel - 1x Ringsensor - 1x Ringempfänger Sensor und Empfänger für Spindelnase A2.4/MK5 Elektroschrank mit CNC-Steuerung FANUC 320i A und Bedienungskonsole mit Bildschirm 15" Color LCD TFT 1024 x 768 Bedienpanel 55 Tasten und LEDs PC Tastatur QWERTY Intel Pentium III 866 MHz Windows XP Professionnal Combitec HMI für FANUC 320i A Standard Programmiersprache nach DIN/ISO Werkstattorientierte Schleifzyklen (WOP) Mobiles Handrad mit Wahlschalter 0.001, 0.01, 0.1 mm und Achsenwahlschalter Vorschub Korrektur über Raster-Potentiometer 0-100 % Spindelgeschwindigkeits-Korrektur über Raster-Potentiometer 50-125 % RJ-45 Ethernet mit TCP/IP Software und Zubehör für das Radius und Konus schleifen mit PC Simulation und CNC-Bahnkontur schleifen Vollautomatisches Schleifen eines Radius G71 und/oder eines Konus G72 ab einem bestimmten Winkel auf einen...

Condition: good (used), axle configuration: 3 axles, first registration: 08/2012, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 9,010 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Equipment = - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Remarks = 08/2012 Kögel curtain-sided trailer with SAF axles with disc brakes (INTRADISC), ABS/EBS, sliding roof, rear doors, internal dimensions: 13.64 x 2.49 x 2.80 m, 2 x 13 lashing rings, unladen weight: 6,320 kg, max. weight: 42,000 kg, tyres: 385/65-R22.5 (L: 1/14/3mm; L: 1/7/6mm), Dutch registration. = Further Information = Knodpfxsx E A Axs Aanef Axle configuration Tyre size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; tread left: 10%; tread right: 10% Rear axle 2: Max. axle load: 9,000 kg; tread left: 85%; tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; tread left: 20%; tread right: 40% Weights Unladen weight: 6,320 kg Payload: 35,680 kg GVW: 42,000 kg Functional Body manufacturer: Kögel S24-1 Sliding roof: Yes Condition Technical condition: good Visual condition: good Identification Registration number: OL-22-TB Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel Knodpfx Aaoxwdxijnsf In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Mecmesin Ultra Test Universal Testing Machine + AFG 100N Force Gauge (Max Load 1000N) Description: For sale is a Mecmesin Ultra Test Universal Testing Machine with a maximum test force of 1000 N (≈ 100 kgf). The scope of delivery includes a Mecmesin AFG 100N (Advanced Force Gauge), which serves as the force measurement module and display unit. The system is suitable for a wide range of tensile and compression tests in the fields of plastics, packaging, food products (e.g. dough), textiles, electronics, and adhesive testing. Technical specifications (Ultra Test): - Maximum test force: 1000 N - Test methods: tensile and compression tests - Motorized test stand, adjustable speed - Typical travel: approx. 500–1000 mm - Positioning accuracy: ±0.1 mm - Control directly via the AFG Technical specifications (AFG 100N): - Measuring range: up to 100 N (≈ 10 kgf) - Resolution: 0.01 N - Accuracy: ± 0.1% of the measured value Knsdpfsw Svtiox Aanef - Measurement types: tension and compression force - Peak-hold function, live display - Interfaces: RS-232 / USB (depending on model) Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Cutting capacity in ST 60 M 10 - M 42 --- Kodpfx Aaex Ai Nqonjnf Motor power 4 kW ,,, Speeds 35 - 185 rpm ,,, Quill stroke 120 mm ,,, throat depth 300 mm ,,, Machine height 2.3 m Weight 1.2 tons Cartridges for metric threads optional Cartridges for inch threads--- ...

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 03.2456, CNC Ibroching machine Arthur Klink RISH 6.3X1000X400 Knodpfx Aaoirwiqsnsf Renewed in 2016

Condition: excellent (used), Year of construction: 1978, Machine can be inspected under power Kedewz Emljpfx Aanjnf

Condition: good (used), Internal item no.: 25087 Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Kodpfx Aaextpbbjnonf Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. The coordinate measuring machine for measuring large workpieces. Measuring machine Johansson Cordimatic 7000 with Renishaw Retrofit (control, rotary/swivel probe & probe exchange library) Johansson Cordimatic 7000 measuring machine with Renishaw PH10T rotary/swivel head Measuring range - 28" x 17" x 13.5" Granite table size - 42" x 28" x 8" Equipped with: Calculator Metrologic 1 joystick trailer controller Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 Controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you. Knjdjg Iiqfopfx Aanef

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Kodpfowz I Acex Aansnf Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.