Used Internal Gauge for sale (10,873)

Condition: excellent (used), Shrinkage Caliper gauge Make Preisser Measuring length 300 mm Cjdpfx Aofhkdtsbzjhd Shrinkage : 1,75% , 2% , 2,5

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Cedpfx Aewz I Acobzshd Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 00, cooling capacity: 30 kW (40.79 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, pump pressure: 3 bar, Water coolers connected to a single central water supply; coolers can also be used with an internal water tank For sale due to surplus capacity Coolers recently serviced and converted to R422D (next service Sept 2025) Coolers are still operational and can be shut down at any time Total of 2 units for sale Cedpfsxphazex Abzehd

Condition: used, Year of construction: 2006, max. workpiece diameter 830 mm workpiece length - max. 600 mm output 7,5 kW The workpiece spindle unit (U/B1) has a travel range of 300 mm for the U-axis and a swivel angle of -1° to +12° for the B1-axis. The infinitely variable speed ranges from 1 to 795 min-¹. The set-up speed (jogging) is 10 min-¹. The spindle head size corresponds to A 8 according to DIN 55026 and the through- hole has a diameter of 58.5 mm. The maximum workpiece diameter is 830 mm, the maximum workpiece length is 600 mm. The maximum load capacity on the spindle head is 6,100 N. The internal grinding unit (Z1/X1/B2) has a Z1 axis travel of 800 mm and an X1 axis travel of 150 mm. The swivel angle of the B2 axis is 270°. The drive of the internal grinding spindles is infinitely variable and has an output of 7.5 kW. The mounting hole for the sanding block has a diameter of 100 mm. The maximum sanding diameter is 600 mm, as is the sanding depth. The manual longitudinal adjustment of the internal sanding axis on the table is 530 mm. Cjdpfx Abewzmrcjzjhd

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance Chsdpfx Aoxltzvobzjd  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: ready for operation (used), center height: 175 mm, grinding length: 600 mm, ★ TOP maintained machine from the liquidation of a renowned toolmaker – be sure to check our other listings as well ★ ★ KELLENBERGER 600U-175 internal and external cylindrical grinding machine with extensive accessories ★ Year of manufacture: Presumably 1987 Machine number: 32.467.2987 Condition: Not tested Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – The items must be collected by the buyer in calendar week 49 / 2025 without exception. The specific date will be determined by us. Earlier availability may be possible upon agreement. Payment terms: Advance payment by bank transfer Internal no.: JO8 Under power for inspection: YES ⚙️Technical data Centre distance: 600 mm Centre height: 175 mm Maximum workpiece diameter: 349 mm Max. grinding wheel dimensions: 400 x 50 x 127 mm Motor power (grinding spindle): 3 kW Grinding spindle speeds: 1500 / 1700 / 2200 rpm Workpiece headstock speed: Infinitely variable 20–400 rpm Total power requirement approx.: 6 kW 380 V / 50 Hz / 10 A With internal grinding device With very extensive accessories as shown in photos Further data can be found in the pictures Scope of delivery Chsdpfx Aoxiy N Usbzed Available manuals Very extensive accessories as per pictures Dimensions & weights Installation dimensions L x W x H approx.: 2500 x 2000 x 1600 mm + accessories on pallets Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️ Be sure to check our other listings as well ⚠️ Additional notes: ► We expressly recommend collection via direct transport (haulage company) ► The goods are sold excluding any warranty ► Technical data without guarantee ► Subject to prior sale ❗ The goods are exclusively sold to business customers ❗

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Cjdpew R E Hvofx Abzjhd

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating Codjw U U Iqopfx Abzjhd • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 1982, Technical details: Cedpfx Asr R Ellebzshd internal diameter: 300 mm grinding depth: 418 mm total power requirement: 13,6 kVA weight of the machine ca.: 4 t grinding length: 1500 mm Grinding-wheel diameter: 150 mm boring diameter: 300 mm

Condition: good (used), Year of construction: 1988, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 Csdpfx Ajw Intajbzohd --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm Chedpfscc D Ddjx Abzsd pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Codpsxf Ikfsfx Abzshd

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement Codpfxow Rdt Io Abzohd • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: excellent (used), Year of construction: 1978, Machine can be inspected under power Codpfx Abjwz Emlszehd

Condition: good (used), Made in Germany Chedpfsda A Eiex Abzjd - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW - weight: 2000 kg

Condition: used, Year of construction: 1959, pulling force - max. 10 t max. ram stroke 1300 mm voltage 380 V weight 1400 kg Chodpfx Abovh Nd Aezod Broaching machine RAUSCH RS10/1300 Year of construction: 1959 Stroke: 1,800 mm Tractive force: 10 tonnes

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Csdpfet Dwb Djx Abzshd Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: excellent (used), Range of measuring tools, calipers Cedpfxjw Tb Dpj Abzohd Mitutoyo 571-203-10 digital depth gauge, measuring range 300mm Garant 412601/150 digital caliper (manufacturer likely Mitutoyo), measuring range 150mm Unknown-brand digital caliper, measuring range 150mm Expert analog caliper, measuring range 300mm Batteries have been replaced or are in good condition. The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier."

Condition: good (used), Year of construction: 1985, Grinding depth 300 mm Height of centers 300 mm Cross movement of the grinding wheel head 150 mm Min. grinding diameter 20 mm Max. grinding diameter 300 mm Spindle head (U axis) 300 mm Workpiece spindle head (B-Axis) +/- 32° (-23°) +2° Cjdpfx Aewrzzmebzjhd Max. table longitudinal movement 650 mm Machine weight approx. 7.5 t

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Chjdpfoi Apb Nsx Abzjd Technical data: - mobile version with motorized forward - reverse drive + steering - mot. grinding stroke forward - backward with speed control - grinding stroke longitudinal forward + backward - mot. contact pressure - grinding pressure regulation - grinding belt dimension approx. 2000 x 50 mm - contact wheel B 60 / D 300 mm - pneumatic connection 6 bar - drive 400 V / 2880 rpm / 7 kW - space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Condition: used, internal diameter 340/440 mm grinding depth 99999 mm grinding diameter 250,350,450 mm grinding length 600 mm centre height 125,175,225 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg Csdpfx Abod Ih Dxezshd 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your metrical overhauled and repainted with: -Neuem CE konformem Schaltschrank. -Neuem Werkstückspindelmotor und Regler in Drehstromtechnik. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm Csdpfx Abeuxft Sszjhd 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Chjdpfx Abov Twgiozsd Used panel of a NAGEL MSU2 No warranty

Condition: used, Year of construction: 2000, honing diameter 45 mm stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Cedpfx Absxddq Eezehd Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Chsdpfjv Tqqhex Abzsd Used Treiber from a Nagel MSU2 control No warranty