Used International 2674 for sale (8,050)

Condition: excellent (used), We can offer internal register-punches HB425, HB780, KOMORI 550 und referenz-punches for Screen (AGFA, FUJI), as well as for Heidelberg Suprasetter Classic 74/105, A52/A74/A75/A105. Nedpfepq Talex Aqvslb Punch-Bar available for A52/A74/A75 All offers are subject to prior sale. Installation on request.

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Nsdshgnd Aepfx Aqvslb Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: good (used), Internal item no.: 25087 Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Nlsdextpbbopfx Aqvob Tailstock taper: MK4 Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Nlodpsqzkdmefx Aqvsb

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Nsdpfxst Hwupj Aqvjlb Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm throat mm Nodpfx Ast Hwvtsqvslb total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm Nsdot Hw T Sspfx Aqvelb total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features Nlsdpfjw U U Iqjx Aqvsb • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Ball valve internal thread -Internal thread: 2 Nlsdpjv Tm Snefx Aqvsb -Full bore, solid sphere -Quantity: 195 pieces in stock -Packaging unit: 12 pieces -1 carton at: 84.00 euros -Price shown: piece

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Nlodpfxsyl Ntpe Aqvsb

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Nljdpfx Aqjxyk S Uevob

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Nodoyg Nvtepfx Aqvjlb

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Nlsdpfxexf Ikfj Aqvjb

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Njdpfx Aqsx Uq T Dovjlb

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm Nsdpfxjyh Hhge Aqvolb - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Make: BWF, type: SI 6/1 AS-N X710, serial no. 1114, control: Siemens, type 840 Dsl, machining diameter 40-400 mm, machining depth 710 mm, workpiece diameter 500-600 mm, max. workpiece length 1,000 mm, WSTK head swiveling -5/+30°, belt filter system, oil mist filter, make Unifil, retrofit 2011. Nedjyfii Djpfx Aqvjlb

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment Nodpfx Aerb Akmoqvjlb - Digital speed display - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cable conveyor Suitable for conveying powders Njdjyf Aztspfx Aqvjlb Tube diameter: 76.1 mm Conveyor made of stainless steel Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) See our other listings VMA Wekerom

Condition: good (used), HOLE DIAMETER: 1-100mm HOLE DEPTH: 230-350 mm PIECE DIAMETER: 360-500 mm Nlsdpfx Aqewf Hgbeveb PIECE LENGTH: 850-1000 mm PIECE HEAD INCLINATION: 15° PIECE WEIGHT: kg GRINDING WHEEL REVOLUTIONS: 18.000-24.000 al' PIECE SPINDLE REVOLUTIONS: 140-1120 al' POWER: kW WEIGHT: 4,5 ton

Condition: repair required (used), Year of construction: 1988, functionality: fully functional, Technical Data Voumard 400 CNC (POSSIBILITY OF A COMPLETE RETROFIT) Nlsdsxpf Ezepfx Aqvjb Minimum grinding diameter: 20 mm Maximum grinding diameter: 300 mm Maximum grinding depth: 300 mm Maximum workpiece and steady rest length: 1500 mm Centre height: 300 mm Axis travel: - Longitudinal travel (Z-axis): 650 mm - Cross travel (X-axis): 150 mm Workpiece spindle: max. 1000 rpm B-axis: +2° / -20°, manual adjustment on workpiece head B1-axis: CNC-controlled turret spindle change Maximum axis speed (Z – X): 12,000 mm/min Grinding head 1: Grinder motor power 7 kW, 15,000 rpm Grinding head 2: Grinder motor power 7.8 kW, 12,000 rpm Machine weight: approx. 9,500 kg Machine dimensions: - Length: 5,000 mm - Width: 2,300 mm - Height: 2,400 mm New Siemens 840D SL control system

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical data: - mobile version with motorized forward - reverse drive + steering - mot. grinding stroke forward - backward with speed control - grinding stroke longitudinal forward + backward - mot. contact pressure - grinding pressure regulation - grinding belt dimension approx. 2000 x 50 mm - contact wheel B 60 / D 300 mm Nedpoi Apb Njfx Aqvslb - pneumatic connection 6 bar - drive 400 V / 2880 rpm / 7 kW - space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Nedpfxshpqquj Aqvjlb Weight: 4,8to

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Nlsdpfxsxvc Igo Aqvob

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Nodpfx Aehad Avoqvslb Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Nedpfx Aqsgyd T Esvslb Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz