Used International 433 for sale (9,359)

Condition: used, tank capacity: 12,280 l, GENERAL Design: rectangular Notes: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in leg length (to be considered during installation) Overall width: 1,500 mm Overall height: 2,970 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate Klodpfx Ajycku Nsbcjp EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Ksdpsycku Asfx Abcjlp Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Total width: 1,280 mm Total height: 2,870 mm Ksdpfxjyckuvo Abcolp Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Overall width: 1,450 mm Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage Klsdpfxoyckuij Abcjp TANK Mounting type: legs Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Kledpfxsyckucj Abcop Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Kedpfx Ajyckt Eebcolp Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Klodsycktrspfx Abcsp Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 200 kg, grinding length: 1,540 mm, grinding wheel diameter: 500 mm, total width: 2,400 mm, total length: 5,445 mm, total height: 1,580 mm, grinding diameter: 300 mm, workpiece length between centers: 1,623 mm, grinding wheel width: 63 mm, grinding spindle motor power: 5,500 W, overall weight: 4,900 kg, pivoting range: 90 °, rotational speed (min.): 32 rpm, rotational speed (max.): 500 rpm, workpiece spindle speed (max.): 500 rpm, Universal Cylindrical and Internal Grinding Machine E450NP x 1500. Manufacturer: JOTES Łódź – 1995. Nominal grinding length: 1500 mm. Max. workpiece length between centers: 1623 mm. Max. grinding length: 1540 mm. Center height: 150 mm. Center height above floor: 1012 mm. Headstock and tailstock taper: Morse 4. Max. workpiece weight between centers: 200 kg. Max. workpiece weight in chuck: 50 kg. Grinding wheel dimensions: external diameter 500 mm, width 63 mm, bore diameter 203 mm. Manual table traverse: 10 mm/rev. Smallest table increment: 2 mm. Grinding wheelhead swivel: +/- 90°. Spindle speed range: 32–500 rpm. Grinding wheel drive motor power: 5.5 kW. Total power requirement: 12.5 kW. Machine weight: 4900 kg. Dimensions (L x W x H): 5445 x 2400 x 1580 mm. Equipment (last photo): Kjdpfeyhcpvex Abcslp - 3-jaw self-centering chuck 200 mm, - steady rest 160 mm, - half steady rest, - diamond wheel dresser.

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Kledpsycimksfx Abcjp

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Kedpsqzkdmsfx Abcjlp

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Klsdpfsxyk S Uex Abcjp

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Klodpfx Abeyg Nvtscep

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Kledjxf Ikfopfx Abcop

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Kljdpfx Aox Uq T Dobcep

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 2,500 kg load capacity Design and technology The forklift’s construction is made of high-strength materials, resistant to intensive use and outdoor conditions. The reinforced frame and high-rigidity mast ensure stability during lifting and transport operations. The Nissan K25 engine with an output of 50 HP is a well-established unit in the forklift industry, offering strong tractive force, durability, and excellent availability of spare parts. The Power Shift automatic transmission allows dynamic acceleration and smooth direction changes without loss of torque. In addition, the use of hydraulic brakes and support systems enhances operational safety and user comfort. Precision and operational efficiency The mast is equipped with a forward/backward tilt function (angle 6° / 12°), enabling safe and precise handling of loads in various working conditions. The side-shift function significantly reduces operating time by allowing fork position adjustments without repositioning the entire truck. Thanks to pneumatic tires with deep tread and high ground clearance, the forklift performs exceptionally well on uneven terrain, ramps, and loading yards. A travel speed of up to 19 km/h unloaded enables fast execution of handling and transport tasks over large areas. Standard equipment Nissan K25 internal combustion engine Power Shift automatic transmission Tilting mast Side-shift forks Complete work and warning lighting Reverse alarm, strobe light, turn signals 1,220 mm forks with manual spacing adjustment Choose a proven solution for internal logistics. Select the CORMak 2,500 kg forklift with the Nissan K25 engine and Power Shift transmission—contact our technical advisor or order directly online. Technical specifications Load capacity: 2,500 kg Maximum lift height: 3,000 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic (Power Shift) Travel speed (loaded / unloaded): 17 / 19 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,600 mm (L1) Distance from front axle to fork face: 469 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,160 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,024 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,000 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,070 mm (H4) Mast ground clearance: 110 mm (H5) Ground clearance: 110 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Kodpfxeycv A Ej Abcelp Weight: 3,680 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Electric forklift truck with a 2,500 kg load capacity and 4,500 mm lifting height Design and technology The forklift is equipped with a modern electric drive that ensures quiet and emission-free operation. The power system is based on a high-performance 48V 490Ah battery, providing up to 10 hours of continuous operation. Compared to lithium-ion batteries, this battery offers up to 40% greater safety—it is resistant to mechanical damage, overheating, and does not emit harmful gases. A stable structure, precise hydraulic system, and a mast made of high-grade steel allow safe handling of loads at full capacity and maximum lift height. The forklift features a soft start system, power steering, and automatic speed reduction while turning, improving machine control and enhancing operator safety. Precision and operational efficiency The side-shift function allows fork position correction without the need to reposition the entire truck. Forward and backward mast tilt enables precise load placement and stable transport. A travel speed of up to 14 km/h and an optimized turning radius of 2172 mm make the forklift highly effective in narrow warehouse aisles. Applications This model is ideal for use in: high-bay warehouses and distribution centers, production plants with high material throughput, industries requiring clean, emission-free operation (food, pharmaceutical, chemical), outdoor loading areas – thanks to pneumatic tires and high ground clearance. Standard equipment Integrated 48V 490Ah battery 70A battery charger Side shift system (lateral fork movement) Tilting mast Full LED work and warning lighting Pneumatic tires with deep tread Audible warning system, turn signals, warning beacon, reverse alarm Technical specifications Load capacity: 2,500 kg Maximum lift height: 4,500 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Battery voltage / rated capacity: 48V / 490Ah Continuous operating time on full charge: up to 10 h Charging time: 10 h Travel speed (loaded / unloaded): 12 / 14 km/h Tire type: Pneumatic Overall length: 3,573 mm (L) Overall length without forks: 2,353 mm (L’) Wheelbase: 1,480 mm (L1) Distance from front axle to fork face: 468 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,170 mm (W1) Rear width: 950 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,038 mm (W5) Maximum lifting height: 4,500 mm (H) Overall mast height (lowered): 1,995 mm (H1) Overall mast height (raised): 5,750 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,098 mm (H4) Mast ground clearance: 110 mm (H5) Klsdpfx Aeycvxyebcsp Minimum ground clearance: 105 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Turning radius: 2,172 mm (r) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,015 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Kodsycvv Sopfx Abcslp Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Klodsyhq Tiepfx Abcep Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Console version with height-adjustable head . with - or - without ROMAI multi-spindle .

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Kjdpfx Abetqlq Eocslp Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm Kljdsyh Hhgjpfx Abcjp - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, Year of construction: 1989, centre height 250 mm Klodpfxexzuzco Abcop centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm weight of the machine ca. 2,25 t

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. Kedeu Ngybspfx Abcelp *

Condition: used, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinder, center grinder Klsdpfxed Atx Do Abcjp -Image below: MK5 -grinding wheel mount: -Motor data: 0.3 kW 1380 rpm -Dimensions: 370/180/H480 mm -Weight: 36 kg

Condition: used, Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg Kodsl Ha R Hjpfx Abcjlp

Condition: good (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available Klsdpfx Abed Sdl Iscsp -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece