Used International 9300 for sale (9,033)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15KX239200001, Technical specifications: Work Area - Maximum turning diameter: 210 mm - Maximum machining diameter: 200 mm - Maximum workpiece length: 220 mm - X1/X2 axis travel: 220 mm / Rapid traverse in X: 24 m/min - Z1/Z2 axis travel: 220/770 mm / Rapid traverse in Z: 36 m/min Ljdpfxsxwuhus Aanoak - Y1/Y2 axis travel: +/-40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis strokes: X - 210 mm; Y - 680 mm; Z - Left 2080 mm / Right 3360 mm; α 270˚ - Maximum speeds (m/min): X - 35; Y - 120; Z - 160; α 270˚/1.5 sec - Load/unload gripper specifications (pneumatically powered): Outer diameter up to Ø170 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle: - Spindle nose: A8 - Maximum speed: Left 5000 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: left spindle - 65 mm / right spindle - not available Tool Turret with Driven Tools: - Tool interface: BMT55 - Number of positions: 15 upper / 12 lower station turret, all driven positions - Maximum speed: 4500 rpm; Milling motor power: 4.5 kW Electrical Equipment: - Operating voltage: 200V, 3-phase, 151A fuse - Connected load: 55 kVA Dimensions: - Machine dimensions (L×W×H): 3200 × 2200 × 3500 mm - Weight: 10,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip removal, gantry loading/unloading from conveyors - Automation includes: Gantry robot + 2 loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip removal conveyor - Coolant filtration 40 bar max: Filber S.L. FTH5/10, 200 l/min - In-process control: Marposs T25 - Broken tool detection system: Peek tool menu Murata/Fanuc feature enabled - Part detection through spindle: Low pressure compressed air sensors - Bar feeder interface max Ø65 mm - Documentation: Electronic and hard copy available Machine condition: OPERATIONAL

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 03/2023, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric,. including installation and connection of th Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Ljdpox Dkpzsfx Aanoak Tyres - 6 x 385/65 R22.5. Internal length: 13311mm. Internal width: approx. 2490mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel 385/65 R22.5.

Condition: used, Used Schwarte-Milfor vertical stainless steel storage tank: - Manufacturer: Schwarte-Milfor - Capacity: total capacity 5720 litre, working capacity 5300 litre Laodpfox Hwccex Aanok - Construction material: AISI 316L - Internal rated: -1/3 bar maximum pressure at 139°C maximum internal temperature. - Dimensions: 1500 mm diameter x 2500 mm straight side x approx. 4480 mm total height, diameter of vacuum ring reinforcement is 1652 mm. - Welded dished top and welded conical bottom. - Central top inlet/bottom discharge internal dia approx. 100 mm. - Has top manway with diameter 450 mm. - Mounted on (4) lugs. Specifications: Capacity: 1,430 gal Diameter: 1,500 mm Height: 2,500 mm Type Of Heads: Dished top head and conical bottom Vertical/Horizontal: Vertical Type of stainless: AISI 316L Legs/Lugs: 4 lugs

Condition: used, Year of construction: 1998, operating hours: 15,030 h, CE mark: yes Serial number: EC200V0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22096 Specifications: 1998 model Hours: 15,030 Weight: 19,300 kg Power: 107 kW Central lubrication system Undercarriage (see photos) Track width: 60 cm Overall width: 290 cm S70 mount above tilt, KM1 below Rototilt from 2004 Narrow bucket Owned for 16 years Climate control / AC Video available Ready for delivery   Notes: Broken wire to the rototilt Starts to roll at high speed Hours: 15030 Ledpfjx Nl N Ajx Aaneak Own weight: 19300 Width: 290 Kw: 107 CE: Yes Model: 1998 Volvo EC200 Beltegraver m/ Rototilt og Smalskuffe

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Laodpfx Asurw Uyeanek Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: used, mileage: 1,38,253 km, power: 136 kW (184.91 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal Number: 0886. MA20363 ----EQUIPMENT---- * Blind Spot Assist including Cross Traffic Alert and Trailer Function * Exterior mirrors, electrically adjustable and heated, additionally electrically folding Lajdpfswx T Dtox Aanek * Headlights: Bi-xenon headlights with LED daytime running lights and fog lights with static cornering light * Paint: Metallic * Rear-view camera – rear-view camera with image transmission of the rear driving path in the multifunction display and trailer coupling assistance * Anti-lock Braking System (ABS) with electronic brake-force distribution (EBD) * Airbag (passenger side) * Airbag (driver’s side) * On-board computer with fuel consumption and mileage information (e.g. remaining range), as well as external temperature display * Roof, flat * Headliner in driver’s cab – up to the bulkhead to the cargo area * Rear double-wing doors with 180° opening angle (without window) * Tachometer * Third brake light * Electronic Safety and Stability Program (ESP) with Traction Control System (TCS) – Hill Start Assist – Crosswind Assist – Brake Assist – Rollover Protection * Sport-tuned chassis * Front electric windows – with quick-down/-up function for driver’s side * Ford Easy Fuel – convenience fuel cap and misfueling prevention * FordPass Connect including live traffic information and WiFi hotspot: Information about the current condition or location of the vehicle as well as operation of selected vehicle functions via smartphone using the FordPass app. Real-time traffic info (in conjunction with Audiosystem 24 and 25), WiFi hotspot (up to 4G/LTE, for up to 10 mobile devices). Further information on FordPass Connect can be found at * Cruise control including leather steering wheel with adjustable speed limiter * Transmission: 6-speed automatic * Grab handles (driver’s side) – including small central storage compartment (1 DIN slot) * Lockable glove compartment with lid * Interior lighting with delay function and front reading lamps * Front air conditioning including dust and pollen filter * Fuel tank, 70 L * LED lights in cargo area * Cargo area lighting with activatable delay – after 30 minutes * Cargo floor: sealed vinyl floor lining, “Easy Clean” * Steering column, adjustable for height and reach * Emergency brake assist including emergency brake light * Package: Load Compartment Protection Package – high side wall cladding, hardboard – “Easy Clean” vinyl floor lining * Package: Visibility Package II – Electrically adjustable and heated exterior mirrors – Heated windscreen – Washer fluid sensor – Electrically folding exterior mirrors – Rain sensor wipers – Headlight assistant with day/night sensor * Package: Sport Styling – Front bumper skirt, side skirts, as well as front and rear wheel arch extensions, body-coloured – Special fog light trim – GT stripes on the bonnet, lower front bumper, and rear door, as well as side decorative stripes * Package: Style Colour Package – Front and rear bumpers and mirror caps painted in body colour * Parking pilot system front and rear including fog lights * Particle filter: Diesel particulate filter * Radio: Audiosystem 21: Ford audio system with 8" multifunction display, also with DAB/DAB+ – Connected Radio – FordPass Connect WiFi hotspot (up to 4G/LTE, for up to 10 mobile devices) – 8" touchscreen multifunction display (20.32 cm screen diagonal)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Laodpfexwvlnox Aanjk Machine Condition: Fully operational

Condition: new, empty load weight: 3,600 kg, maximum load weight: 8,300 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: other, tire size: 205/65 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable up to approx. 3,850 mm, locking possible at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm, laden loading height approx. 830 mm, internal vehicle width approx. 2,530 mm, 4 centre post pockets for 100 x 50 plug-in posts, 8 post pockets in outer frame, 4 lashing rings, each rated at 5.3 t, outer frame with lashing eyes, 4 warning signs with lighting, removable rear beacon, contour markings and side underrun protection, mudguards and spray suppression at rear. Subject to printing errors, mistakes and changes; sample images. More details at: ! Ledjx Nchvepfx Aanoak

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Lsdpfox D Sgzox Aanjak Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), DESCRIPTION CHARACTERISTICS MATERIAL Coils DCP & GALVANIZE THICKNESS 0,3-2,5 mm ( For 1500 mm width max to 1,5 mm) WIDTH COIL 300-1550 mm Lasdevupgwjpfx Aanek RANGE OF LENGTH 400-12.000 mm MAX WEIGHT OF COIL PROCESSING 16 Tn INTERNAL DIAMETER COIL 440-640mm AND 700-800mm REEL CHUCK TYPE LENGTH TOLERANCE -1 / +1 mm (ή 0+2mm) DIAGONAL TOLERANCE 0 + 1mm

Condition: good (used), Internal micrometer screws, micrometer screw, inner diameter Ljdpfxeb A Sx Sj Aanjak -Measuring range: 35-50 mm -Measuring range: 50-70 mm -Measuring range: 70-100 mm -Measuring range: 100-145 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Including case -Weight 0.8 kg

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Ledpjxwl Tzofx Aaneak Machine Status: NOT WORKING: NC does not start

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 2550 mm Measurements depth 5450 mm Measurements height 3150 mm Machine weight 24500 kg Main Drive Pressing force 400 t Stroke 300 mm Laodpfx Aajx D Rmaenok This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), DESCRIPTION CHARACTERISTICS MATERIAL Coils Cold , Galvanize THICKNESS 0,4-2,5 mm WIDTH COIL 500-1550 mm MAX WEIGHT OF COIL PROCESSING 16tn INTERNAL DIAMETER COIL 480-520mm, 580-620mm,740-800mm EXTERNAL DIAMETER COIL 1600mm INTERNAL STRIPE DIAMETER 508mm TOLERANCE OF STRIPE 0,1mm MIN STRIPE WIDTH 20mm MAX STRIPE WIDTH 1520mm Ledpfx Aasvupmdenoak Number of Tearing / Width 0,4-1 mm 20 stripes 1,01-2 mm 10 stripes 2,01-2,5mm 8 stripes Minimun Trimming 8mm (2X4mm)

Condition: good (used), - Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg Lasdpfx Aasb A Sxvjnok

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Laedpfx Aexwlmujanek Machine status: Operational (WORKING)

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model iTNC530 HSCI Main Drive Spindle speed range 20-28000 rpm Spindle motor power 55/43.5 kW (40/100%DC) Movement X-Axis Movement 1050 mm Y-Axis Movement 800 mm Z-Axis Movement 560 mm Additional Equipment Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Application Types Milling Ljdpfxjx D D Tgo Aanoak

Condition: ready for operation (used), Year of construction: 2005, SLITTING LINE MACHINE 4. SLITTING LINE - OME A/A DESCRIPTION CHARACTERISTICS 1 MATERIAL Coils Hot - Cold - Galvanize 2 THICKNESS Hot 1,5-5 mm Cold 1,25-3 mm Galvanize 1,25-4 mm 3 WIDTH COIL 500-1550 mm 4 MAX WEIGHT OF COIL PROCESSING 22τν 5 INTERNAL DIAMETER COIL 500-820 mm Decoiler type Double Cone 6 EXTERNAL DIAMETER COIL 1800 mm 7 INTERNAL STRIPE DIAMETER 508 mm 8 TOLERANCE OF STRIPE 0,2 mm 9 MIN STRIPE WIDTH 41 mm MAX STRIPE WIDTH 1490 mm 11 Number of Tearing / Width 1-2 mm 15 stripes 2-3 mm 9 stripes 4-5 mm 6 stripes 12 Minimum Trimming 1,25-3,85 mm => 10mm (2X5mm) Ljdpfx Aovupk Aeansak 4-5 mm => 13mm (2X6,5mm)

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 72 kg Ledpfx Aeb A Sxgsansak

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Lsdpfjxwl N Aox Aaneak Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 45-6000 rpm Spindle bore Ø62 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 100 mm (+/-50) Z-Axis Movement 350 mm Tools Number of station 12 Type of tool holder VDI design Media Chip conveyor Yes Additional Equipment SR1453 hydraulic cylinder for chuck operation 1 set V12 VDI design revolver head 1 set Mayfran chip removal preparation 1 set Machining Navi L-g – cutting aid for dampening vibrations during cutting 1 set Laedpfex D Ni Hsx Aanok API library 2 – for Industry 4.0 solution 1 set OKUMA Virus Protection System (OSP-VPS) - Virus protection 1 set 6” chuck This 3-axis OKUMA LB2000 EXII MYC lathe was manufactured in 2018. It features a max machinable diameter of 360mm and a workpiece length of 250mm. The machine offers internal cooling through the spindle, a V12 VDI design revolver head, and a 6” chuck. Equipped with the OSP-P300L CNC Controller and advanced features like the Machining Navi L-g for vibration dampening and OKUMA Virus Protection System. Consider buying the OKUMA LB2000 EXII MYC machine we have for sale. Contact us for further details. Application Types Turning

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg Lodpfxob A Sxde Aanjak

Condition: repair required (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 1640137, Technical characteristics: # Machining workspace: X 400 mm; Y 450 (700) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 2 rotary tables A1/2 NC (33.3 rpm), with hydraulic clamping mounted on indexable rotary table A3 (0 to 180° in approx. 4 sec). # Rapid traverse speed: X, Y, Z 1–40,000 mm/min # Positioning accuracy Tp: 0.01 mm Laedpfx Ajxvyfvoanek # Distance between spindles: 400 mm # Spindle speed: 50–12,500 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x30 tool positions / chip-to-chip time 4.5 sec # Maximum tool diameter 75 mm / Maximum tool length 275 mm / 10 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 68 kVA Dimensions: # Installation footprint: approx. 6.35 x 4.5 x 4.2 m # Machine dimensions: approx. 4.6 x 3.0 x 3.0 m # Weight: approx. 13,800 kg Equipment includes: # CNC controller: Siemens 840C # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll 400K-1/950 RSF100 # Oil cooling unit # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil vapor extraction/recovery system # Tool presence detection system in spindle

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2720 mm Measurements depth 4345 mm Measurements height 2815 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 rpm Spindle motor power 18.5 kW Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1270 mm X-Axis Rapid Traverse 36 m/minute Y-Axis Movement 670 mm Y-Axis Rapid Traverse 36 m/minute Z-Axis Movement 625 mm Z-Axis Rapid Traverse 30 m/minute Workpiece Workpiece weight 1000 kg Additional Equipment RENISHAW tool and workpiece probe Internal cooling through the spindle: 12 Bar External spindle cooling with air and cutting fluid Belt chip conveyor Rinsing gun Coolant tank: 380 l Preparation for the 4th person External memory: 1 GB Lajdpfx Asx D Ii Seanek Block reading for 3D machining Handwheel This 3-axis DOOSAN DNM 650 II vertical machining center was manufactured in 2015. It features a Siemens 828D control, a spacious 1300 x 670mm table, and a robust 18.5 kW spindle motor achieving speeds up to 12000rpm. The machine includes a 30-position tool changer and SK40 tool taper, enhanced by a RENISHAW probe and internal cooling capabilities. If you are looking to get high-quality milling capabilities consider the DOOSAN DNM 650 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min * Max. speed, driven tool: 6000 rpm * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters # Part Handling: * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. Laodexvx T Sepfx Aanok # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available