Used Ir Probe for sale (62,505)

Condition: good (used), Air cushion cushions or air cushion bags are a particularly space-saving and clean packaging solution. Fill-Air air cushion packaging systems offer a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They provide excellent protection and efficient void filling while simultaneously reducing material and shipping costs. Lajdpfx Aaeb A I Ehensk -Weight: 32 kg

Condition: used, tank capacity: 265 l, GENERAL INFORMATION Design: vertical Notes: Cone height approx. 1200 mm; handhole approx. 220 x 315 mm; handhole collar and handhole cover made of Fe; one container missing the handhole cover; handhole cover fastenings on other containers are incomplete Speed: 90 - 546 rpm Explosion proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be checked) Total height: 3,350 mm Heating/Cooling: present Power: 1.5 kW Max. permissible operating temperature: 100°C Max. permissible operating overpressure: 0.49 bar Max. overpressure: 20.5 bar Agitator: Propeller Base type: feet Location: Bremen Nameplate: Volume: 265 liters Jacket volume: 25.0 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4301 (AISI 304) Condition: used Last area of application: steel alloys VESSEL Max. permissible operating temperature: 100°C Ledpfxexqa T Aj Aanoak Bottom type: conical bottom Number of legs: 4 HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manway/Dome: Handhole Outlet: present Note: slight residues MATERIAL SPECIFICATION Leg material: steel AGITATOR 1 Voltage: 290/500 V Agitator arrangement: off-center in top Agitator features: 1 agitator, 59 – 363 rpm

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria Lsdpou T Hrvsfx Aanjak - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; Lodpfxjmk S Slo Aansak 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Jrion HFS-170/15-SA long-cut circular saw for precise longitudinal cuts in solid wood, panel materials and wood composites. Lasdpsxvcacjfx Aanek cutting length: approx. 5,300 mm

Condition: excellent (used), CATALOG NUMBER 6051 TECHNICAL DATA - Pull belt width: 1300 mm - Max workpiece width: 1250 mm - Max workpiece height: 60 mm Brush units: - 2 brush rollers: 1 for distressing (structuring), 1 for polishing - Brush diameter: 260 / 300 mm - Brush length: 1250 mm - Brush spindle diameter: 32 mm - Brush motors: 2 × 2.6 kW Lajdpfsi Dawaox Aansk - Reducer motors (servomotors): 2 × 0.55 kW - Brush roller speed: 300–1000 rpm - Brush cleaning air blow-off - Electric height adjustment for sanding Brush oscillation: - Brush oscillation/stroke - Range: 45 mm - Feed rate of pull belt: 1.5–7.5 m/min - Pull belt motor: 0.75 kW - Belt cleaning air blow-off: 0.75 kW - Vacuum pump: 7.5 kW - Compressed air: 6 bar - Extraction connection diameter: 120, 160, 220, 310 mm - Dimensions (L/W/H): 2060 × 2000 × 2050 mm - Weight approx. 2000 kg ADVANTAGES – French manufacture – Never repainted – Equipped with nylon brush for wood structuring (distressing) and 1 sanding/polishing wheel for wood – Vacuum pump – Servo motors – individual speed adjustment for each brush – Used sander, in very good condition Net price: PLN 29,900 Net price: EUR 7,120 depending on exchange rate (4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: good (used), Air cushion cushions or air cushion bags are a particularly space-saving and clean packaging solution. Fill-Air air cushion packaging systems offer a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They provide excellent protection and efficient void filling while simultaneously reducing material and shipping costs. Ljdpfeb A I Egex Aaneak -Weight: 42 kg

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m Laedpfx Aju Ibuksanok fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: excellent (used), Compressor AIRCRAFT ACS Duo – used – Galvanised tank, screw compressor, incl. refrigerated dryer, incl. condensate treatment unit, automatic condensate drain ----- Technical Data ----- Tank capacity: 2 x 100 litres, Filling performance: 360 litres, Max. pressure: 10 bar, Motor: 3.5 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Quality Info: - fully cleaned Laodpfxjwb Evts Aansk - electrics checked - immediately ready for operation

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ledpfx Aextwddjansak

Condition: good (used), Mirus Anleger printing machine, in working order. Lasdpsud Awvjfx Aanok

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations) Laedpfsqv Aivsx Aanjk

Condition: good (used), Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter Lajdpfx Aajb A Ngpenjk -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Condition: used, Year of construction: 2007, operating hours: 6,286 h, 2007 | Wirtgen KMA 200 | Used Asphalt Recycler | 6286 hours Lasdpfxjx Ndgge Aanok 📍Location: France, Boulazac Isle Manoire 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 139000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 4 approved ✅ 8 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Only visual inspection. Machine said to have been in working condition when purchased used by the owner. Getting the machine ready for work will take a few hours, but will be arranged for a serious buyer. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31332 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Lajdpfxeu R S A De Aanjk Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: ready for operation (used), Hirschmann OCTOPUS OS20-002000T5T5T5-TBBY999GMSE3S Ethernet Switch, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Laedpfji Ea Nijx Aanok

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Lasdpfx Aajx Iiw Isnek Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1782385, Schirmer BAZ 1000, year 2007, in very good condition, fully operational, still installed and in working order. Available for inspection at any time, as it is currently operating in the factory. Laedsx Ecb Sepfx Aanjk

Condition: good (used), Three-phase motor, electric motor -Engine: unused -Power: 11 kW -Speed: 2900 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 54 -Number: 1x motor available -Dimensions: 590/410/H420 mm -Weight: 80 kg Lajdpfx Ajb A Sk Doanok

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle speed range 11000 Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 44 m/min Y-Axis Movement 540 mm Y-Axis Rapid Traverse 44 m/min Z-Axis Movement 560 mm Z-Axis Rapid Traverse 25 m/min Laodpfxsx D R D Eo Aanok Table Table load 1,300 kg Tools Max weight 7 kg Max tool diameter 65 mm Max tool length 250 mm This 4-axis Akira Seiki Performa V 4 XP was manufactured in 2017. It features X/Y/Z travels of 1050/540/560 mm, rapid traverse rates up to 44 m/min, and a spindle speed of 11,000 rpm. The machine includes a 28-tool magazine, a 4-axis table, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the Akira Seiki Performa V 4 XP machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Kirchner Leipzig triple-spindle combined table saw, mortising and milling machine. Without milling arbor. Lajdpfswzbcvsx Aanjk engine: 3 kW

Condition: ready for operation (used), Hirschmann OCTOPUS OS20-002000T5T5T5-TBBY999GMSE3S Ethernet Switch, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Laedpfx Aaei Ea Nfenok

Condition: used, Year of construction: 2001, x-travel 305 mm y-travel 610 mm z-travel 100 mm Control Fanuc 21-M spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Lodpfx Aaowth Snjnsak Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2495 mm Measurements depth 3870 mm Measurements height 3000 mm Machine weight 8440 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 3 Movement X-Axis Movement 1350 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 640 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 660 mm Z-Axis Rapid Traverse 25 m/min Tools Max weight 7 (15) kg Max tool diameter 65 (130) mm Max tool length 250 mm This 3-axis Akira Seiki 5.5 was manufactured in 2020. It features a robust Fanuc 0i CNC control, with travel dimensions of 1350x640x660 mm and a spindle speed of 12,000 rpm. The machine includes a 28-tool magazine and a 4th-5th axis rotary table by TJR. Ideal for precision machining with its rapid traverse rates up to 30 m/min and a high-pressure coolant system at 20 bar. Contact us for more information about this machine. Lajdpfox D N Atsx Aanok Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 976 h, General Data Machine weight 7000 kg Laodpfsx E Eatsx Aansk Main Drive Number of axis 4 Spindle motor power 28 kW This 4-axis CHIRON FZ 18 L was manufactured in 2006, featuring a robust 2000x520x600mm working area and a powerful 28 kVA system. With only 976 hours since control system replacement, it's a reliable choice for precision machining. Consider the opportunity to buy this CHIRON FZ 18 L vertical machining centre. Contact us for more information about this machine. Application Types Milling