Used Ir Probe for sale (3,908)

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional Fgjdpfozzd Hhox Aptog - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Fsdpjygx Hnjfx Aptogg Invoice and test protocol available!

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine Fgodexacbuopfx Apteg - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever Fsdpfx Apjxaafdetsgg - electrical safety device

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Fjdpfxsyrm Hyj Aptjgg Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Inspection possible by appointment.

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Fodpfozzm Dpex Aptegg Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: used, Year of construction: 1991, Format: 760 x 440 mm Equipment: Spindles: 4 Drilling diameter: 3 ??? 10 mm Fjdpfjy Iz R Hex Aptogg Drilling depth: up to approx. 70 mm Spindle spacing: adjustable Spindle shaft: ?? 11 mm Hole spacing: min. approx. 3 mm / max. approx. 800 mm Table size: approx. 760 x 440 mm Connection: 380 V Power: approx. 1.5 kW Weight: approx. 90 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Fgsdpszg U Tpefx Apteg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Fsdjy Sv S Hepfx Aptsgg

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. Fjdpfxozwxz Es Aptsgg DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: good (used), Year of construction: 1997, functionality: fully functional, operating hours: 9,350 h, travel distance X-axis: 1,530 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 1,140 mm, workpiece weight (max.): 2,000 kg, number of slots in tool magazine: 90, controller manufacturer: Fanuc 15M, total height: 3,930 mm, total length: 7,760 mm, total width: 4,470 mm, overall weight: 22,000 kg, number of spindles: 1, rotary table diameter: 800 mm, spindle nose: MAS 403 BT50, spindle speed (max.): 5,000 rpm, operating hours of spindle: 9,350 h, Equipment: chip conveyor, documentation/manual, Niigata HN 80 C Fanuc 15M Fgodpfot Rgz Tex Apteg 5-Axis horizontal machining centre whit low hours and EXSTENDED AXIS X Y Z Fanuc 15M control travel distance X-axis: 1530mm travel distance Y-axis: 1220mm travel distance Z-axis: 1140mm Pallet width: 800X800mm / 3 palettes Max load 2000kg spindle speed (max.): 5000 rpm Spindle nose MAS 403 BT50 90 pcs of tools in tool magazine True spindle coolant Oil mist lubrication of spindle bearings Spindle oil cooler Turn table around Y-Axis diameter 800mm Hydraulic spindle box lightening Automatic power off RS-422 Port Electric pulse handwheel Renisaw MP-7 Probe Post processor for Cam for the software "Autodesk Fusion 360"

Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, 9-seater L3H2, glazed Available for immediate delivery: 1 manual transmission, 1 automatic transmission (including air conditioning in the passenger compartment, +€4,500.00) Peugeot Boxer 9-seater with airline-style flooring system - 7 passenger seats with adjustable backrests, armrests on the left and right, magazine net, Isofix - ABS cladding in the passenger compartment including roof lining and night lighting Fodpfx Aszz E T Aoptjgg Optional extras available, e.g. step, wheelchair ramp, lift, auxiliary heater for the passenger compartment, etc. Special equipment: Windows in the cargo/passenger compartment: - Dark-tinted side windows, rear-view camera with dynamic grid lines, seats in the driver's cab: single passenger seat Additional equipment: Airbag on the passenger side, airbag on the driver's side, audio system: digital audio system (DAB) with a 5" color display and Bluetooth hands-free system, exterior mirrors electrically adjustable and heated, both sides, exterior mirrors standard, up to vehicle width 2200 mm, converter package, roof antenna digital (short), parking assistance system rear (acoustic), driver assistance system: pedestrian recognition and warning, windows in the cargo/passenger compartment: - Passenger/cargo compartment glazed, speed control system (cruise control) including speed limiter, transmission automatic - (8-speed), cup holders in the front and storage space, urea tank (AdBlue): 19 L, rear hinged doors (opening angle 180 degrees), rear hinged doors with glazing, body/superstructure: high-roof van standard, fuel tank: 90 L, radiator grille frame black glossy, cargo area partition, model update, engine 2.2 L - 103 kW Blue-HDI FAP KAT (2184 ccm), wheelbase 4035 mm, tire repair kit, tire pressure monitoring system, low emissions according to exhaust standard Euro 6e, sliding door cargo/passenger compartment right with glazing, SCR system (AdBlue technology), power steering electronically controlled, safety package, seat cover/upholstery: fabric, seats in the driver's cab: driver's seat with armrest, height adjustable, seats in the driver's cab: driver's seat with lumbar support, start/stop system, daytime running lights, lashing eyes in the cargo area, warning system for front seatbelts, permissible total weight 3.50 t Net export possible.

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Fgsdpfx Apjzz Ahqstog Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Condition: excellent (used), Year of construction: 2015, Incremental measuring probe HEIDENHAIN MT 60M ID 359 341-01 Measuring probe extension: extended by spring force Measuring length: 60 mm Guide type: ball guide Reference mark position: 1.7 mm Accuracy class: 0.5 µm Electrical connection: M23 connector, pin, 9-pole Connection assignment: D295051 Cable type: PUR, Ø 4.5 mm Fjdjzuc Dxspfx Aptegg Cable length: 1.50 m Output signal: sinusoidal current signals (11 µA) Pitch period: 10,000 µm Voltage supply: 5V (+-5%) Protection class: IP 50 (EN 60529) Operating temperature: +10/+40 °C

Condition: used, Year of construction: 2016, Spindle speed range: 12000 1/MIN Spindle motor power: 22.4 kw X-AXIS Movement: 1270 mm Y-AXIS Movement: 508 mm Z-AXIS Movement: 635 mm Fodpezzz Tljfx Aptsgg Table: 1321 x 495 mm Distance table to spindle nose 742 mm P-Cool Cat 40 ATC 30 + 1 positions Chip conveyor Through Spindle Cooling 4th axis HRT210SS coolant tank 208 Liter Extra Coolant filtration Auto tool measurement High speed milling CT-style tool changer grippers Visual part programming Probe The machine is available for inspection and test run at our stock!

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system) Fsdpfxjzv Tlvs Aptsgg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1101058, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer a used Haas VF-2SS vertical machining center, manufactured in 2013. - Manufacturer: Haas - Model: VF-2SS - Year of manufacture: 2013 - Technical condition: used, very good - Serial number: 1101058 - Machine type: vertical machining center The machine is fully functional and in continuous use. Throughout its operational life, it has primarily been used for machining soft materials – 90% of the work performed involved machining aluminum in a single-shift system. The machine has no history of accidents, has been operated by a single employee for the past 4 years, and operates correctly, being maintained in good technical condition. In 2022, it was transported from our branch in Germany to Poland, where it has been in operation since it was new. Included equipment: - Renishaw tool probe, - Renishaw workpiece probe, Fgjdpfx Ajzzcmajptjg - external Haas coolant filter, - standard Haas machine equipment. - the machine is sold without a vise or fixtures. The machine is ready for further operation and can be inspected. It is possible to start the machine and demonstrate its operation. If you have any questions, please send a message or contact us by phone.

Condition: like new (used), Year of construction: 2023, operating hours: 3,363 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 257 mm, total length: 333 mm, total width: 233 mm, table width: 495 mm, table length: 1,320 mm, table load: 794 kg, rotational speed (min.): 12,000 rpm, overall weight: 6,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,402 h, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Purchase both machines together for €125,000. Excellent opportunity to acquire a complete Haas machining package. • Haas VF-4SS • Taper CAT40 • Spindle: 12,000 rpm Inline Direct Drive • TSC (Tool Side Center) • Renishaw WIPS (Wireless Inspection Probe System) • High-Speed Machining • Mist Condenser • Chip Conveyor • 30 ATC (Automatic Tool Changer) • Cutting Hours: 2,402 hours • Cycle Hours: 3,363 hours Fgodpfxoztm N No Apteg • First owner (company) • Complete service history • Maintenance performed by authorized service provider Teximp d.o.o. • No crashes or major repairs • + Approximately 15 tool holders • Company-owned machine, located in Croatia • Immediately available • Operational and available for inspection • Ready for immediate production

Condition: ready for operation (used), Year of construction: 2009, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: AT0286, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 4,000 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, overall weight: 5,000 kg, Equipment: documentation/manual, SPINNER TC600-65 SMCY Year of manufacture: 2009 We offer for sale a high-quality SPINNER TC600-65 SMCY CNC turning center. The machine is in good technical condition and can be inspected under power by arrangement. - Siemens 840D control system - Tailstock - Y-axis - Chip conveyor - Bar feeder interface - Tool probe - VDI30 turret (all stations powered) - Chucks - Tool holders - High-pressure coolant system Fgjdpjzux R Uefx Apteg

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Fgedjzwhp Sepfx Aptsg Location: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm C Axis Travel: 0.001 degree

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Fgsdpfx Ajzx S Egopteg Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Calibration documentation Technical documentation Manual Fgedpfx Aszx N Rgepteg Note: The laptop and PolyWorks software are not included in the offer.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Oil Mist exhaust system Documentation 1-fold in English + CD Machine option package Minimum quantity lubrication system High pressure cooling through spindle BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” CSE Siemens simulation Fgjdpfx Apjzvuu Sjtsg Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control Fgsdpfx Apjzzp Taotsg - HEIDENHAIN ACC "Active Chatter Control" active chatter suppression

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Fgsdpfszzknxjx Aptog Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside