Used Joinery Machine for sale (65,187)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the equipment on time, no later than week 46. TECHNICAL DETAILS Machining Area Cross-section: 20 × 60 to 300 × 450 mm Material Feed Infeed cross conveyor: 7 strands Conveyor length: 2.2 m Saw Unit Saw: Undercutting swiveling miter saw Milling Units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical Combination Support Psdps Aayqwefx Airegu Drilling units: 1 unit Finger cutter: 1 unit Horizontal Combination Support Drilling units: 2 units Grooving tool: 1 unit Workpiece Handling Beam turning station: fully automatic Foundation and Installation Minimum floor slab thickness: 10 cm Floor slab requirements: level, sufficiently reinforced, and suitable for anchoring Electrical Data Voltage: 400/230 V, 3/N/PE Fuse rating: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed Air Supply Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control System Retrofitting: Fall 2020 by Hundegger Control system: CAN bus control Previous control system: MIPPS EQUIPMENT Infeed cross conveyor with 7 strands Undercutting swiveling miter saw Universal milling machine Roller cutters Finger cutters Combination support for vertically operating tools Drilling unit, vertical Finger cutter, vertical Combination support for horizontally operating tools 1 drilling unit, horizontal Grooving tool, horizontal Fully automatic beam turning station

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 500 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 1,500 kg, The machine used to operate for 10 hours a week. Now it has been idle for 5 years. It is not in use. Pgjdoz I D E Ijpfx Aireu

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Podpjzyihujfx Airogu Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter Podpfx Ajzrazcoirsgu - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment. Pgsdpfszu Anwsx Airju

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge Pjdszb I Iwepfx Airogu - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Pedpfszudynex Airogu Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started.

Condition: good (used), Year of construction: 2012, overall weight: 10,000 kg, Used TechnoTurn Machine equipment: Fixed portal. The following components are mounted on the portal: B-axis with 360° movement, automatically controlled by the CNC. The group carrier plate is mounted on the dovetail slide. “TURN” milling head for milling and sawing on all 6 sides of the workpiece. The milling head has the following features: Special milling unit with 2 independent outputs (A-B). A-output: Tool holder HSK 63 F for automatic tool changing, infinitely variable speed from 1000 to 18000 rpm. B-output: Flange mounting for the saw blade, max. Ø 600mm with programmable speed from 1000 to 4,000 rpm. Spindle power of 12 kW at 7000 rpm. Programmable speed from 1000 to 18000 rpm. Liquid cooling. C-axis rotation 540°. Z-axis travel 1200 mm. X-axis travel 800 mm. Inverter 22 kW for spindle control from 1000 to 18000 rpm. Technical data: 7 controlled axes: 2X-Y-V-Z-B-A Pgodpfj Adrcgox Airsu Axis travel X: 800 mm Axis travel Z: 1200 mm Rotation axis B: 260° Rotation axis A: 540° Maximum standard dimensions of the supports: 7,000 x 400 (h) x 240 mm. Maximum length of the supports with optional supports: unlimited. Minimum dimensions of the supports: 50x50 mm. Travel speed axis X: 63 m/min Travel speed axis Y-V: 102 m/min Travel speed axis Z: 68 m/min Rotation speed axis B: 12 rpm Rotation speed axis A: 28 rpm Electrical system: 400/50Hz ±5% Air consumption (6 bar): 400 l/min. Tool changer with 11 positions. Additional supports in the infeed and outfeed area. Processing of workpieces of virtually unlimited length. We will gladly answer any further questions upon request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Podpfszmrw Sjx Airogu Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. Pedszux Hcepfx Airjgu The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) Psdpsz Da Htofx Airjgu - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 8,000 kg, Hundegger SC1 Year: 2005 It is being sold in excellent condition as seen in the pictures. Pgodpfszzx Dbsx Airju We will help you disassemble and load the machine.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: K2i-5-625, total length: 1,20,000 mm, total height: 3,000 mm, total width: 5,800 mm, overall weight: 14,500 kg, type of input current: AC, Equipment: safety light barrier, Hundegger K2i – 5-Axis Cutting Machine – Year of Manufacture 2015 For sale is a well-maintained and extensively equipped Hundegger K2i 5-axis cutting machine, manufactured in 2015, capable of processing wood cross-sections up to 62 cm. The machine was used in our timber construction facility in a single-shift operation and was not used daily. All annual maintenance services were performed by the manufacturer, Hundegger. The last service was carried out in February 2026. In addition, the head of the main milling spindle (K2-5-U5-TU-10) was replaced. The machine is in a well-maintained, used condition with typical signs of wear and tear due to age and use. Technical Data Manufacturer: Hundegger Model: K2i Year of Manufacture: 2015 Type: 5-Axis Cutting Machine Maximum processable wood cross-section: up to 62 cm Wood lengths: up to 13 m with extended infeed Maintenance: annually by Hundegger Last maintenance: February 2026 Availability: from December 2026 Technical Equipment Processing Units 5-axis universal milling unit Undertable pivoting cut-off saw, 11 kW Combination support for vertically operating tools Vertical drilling unit, 2.2 kW Combination support for horizontally operating tools Horizontal drilling unit Reinforced horizontal drilling unit, 3.0 kW Dovetail milling cutter (60 × 38 × 16.5 mm) Marking device at the rear Marking and labeling device underneath Wood handling and material handling Fully automatic wood infeed Fully automatic hydraulic beam turning station Extension of the feed conveyor and the infeed roller track for wood lengths up to 13 m Roller track for wood removal with ejector Extension roller track, length 5.30 m 5-arm wood storage rack Control and Safety Electronic control with Hundegger production software Remote maintenance Safety devices and guarding Maintenance and Condition The machine was regularly maintained by the manufacturer, Hundegger. Annual manufacturer maintenance Last maintenance in February 2026 Head of the main milling spindle replaced (K2-5-U5-TU-10) Used in a single-shift operation Podpfx Aijz Rixyeregu Not used daily Well-maintained condition with normal signs of wear Availability, Dismantling and Collection The machine is available from December 2026. Complete dismantling, loading and collection must be carried out by the buyer independently and at their own expense. An inspection is possible by prior appointment. Contact If you are seriously interested in purchasing the machine or have any questions, please do not hesitate to contact us. Further technical information and inspection appointments are available upon request.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, cutting height (max.): 740 mm, power of the milling unit: 5,000 W, cutting width (max.): 650 mm, control cabinet width: 1,500 mm, saw blade diameter: 740 mm, rotational speed (min.): 1,600 rpm, rotational speed (max.): 1,600 rpm, power: 30 kW (40.79 HP), working length: 12,000 mm, working width: 650 mm, type of input current: three-phase, Equipment: safety light barrier, Fezer joinery line Pjdeyyx Dnjpfx Airegu

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Pedpfx Aoy Ri Hueirogu Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Essetre Techno Fast Machining Center, manufactured in 2026, exhibition machine with warranty, including installation/commissioning and training Machining area: 620x300mm, length unlimited 12 kW twin-spindle with 5 interpolating axes, liquid-cooled 1,000-18,000 RPM Automatic 11-position tool changer including machining tools Chip conveyor in the machine Pedpfoz Eakuox Airjgu Automatic central lubrication Short delivery time

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) Pgjdpfxoza Dzde Airju - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: refurbished (used), Machine is completely factory-reconditioned and comes with a warranty. Working area: 800 x 400 mm, length unlimited. 2 pcs. 5-axis spindles with 12 kW, 1,000-18,000 RPM, HSK 63F. Liquid-cooled. 2 pcs. 9-position automatic tool changer. Automatic loading and unloading stations, 13,500 mm. Includes tools and chain conveyor. Includes chip conveyor. Includes software update. Available on short notice. Pgedpfxsz Eatio Airju

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: Pgodozzx Iyspfx Airju - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: excellent (used), functionality: fully functional, 4 spindles: bottom/right/left/top Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Total power: 16.8 kW Year of manufacture: 2021 Podpfx Aiszz Nq Serjgu Weight: 2550 kg

Condition: good (used), Technical Description of the Lumber Repackaging Line Podpfeywaxzox Airogu Purpose of the equipment: The line is designed for automated repackaging of lumber, offering the following operations: - Dismantling of kiln-dried (stickered) packs - Formation of transport (shipping) packs without stickers - Reverse repackaging of transport packs into kiln-dried packs with stickers Functional features of the line: - Automatic feeding of lumber packs - Layer-by-layer dismantling of packs with separation of stickers - Accumulation and formation of new packs according to specified parameters - Automatic placement of stickers during the formation of kiln-dried packs - Adjustable pack dimensions (width, height, length) - Integration with sorting and lumber conveying systems - Capability for continuous operation Processed material: - Softwood and hardwood lumber - Thickness: 16–80 mm - Width: 75–250 mm - Length: 3,000–6,000 mm.

Condition: good (used), wood impregnation line Podpfx Aszwx Nioiregu

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: Pedpfxjzvrf Is Airegu - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We are offering this used Schmidler S4 woodworking machine, manufactured in 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Type of machine: abbundanlage (cross-cutting machine) - 4-strand cross-feed conveyor (inclined) - Infeed roller conveyor - Zero-point detection - Electronically controlled under-table swivel miter saw - Saw blade diameter 710mm - Rotation angle 360 degrees - Tilt 0-65 degrees - Waste wood discharge - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling cutter including finger cutter and dovetail milling cutter - Horizontal drilling unit – rafter nail drilling unit - Vertical drilling unit - Powered outfeed roller conveyor - Pusher – pneumatic - Transport and measuring system - Conveyor belts to be replaced Pgedpsy Ewxzefx Airju - Control system: sema btl Maximum component dimensions: Height 300mm Width 400mm Overall length approx. 21m Infeed roller conveyor Outfeed roller conveyor with pusher and stacking bars Machine used, fully functional, Conveyor belts to be replaced Machine can be inspected by arrangement. Available for sale immediately. If you have any questions or would like more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 241115, feed length X-axis: 40,000 mm, warranty duration: 6 months, total length: 10,000 mm, total height: 3,350 mm, type of input current: three-phase, Equipment: CE marking, Semi-automatic tilting table for wall panel assembly, timber frame construction, maximum size 4000x10000mm - Working height 700mm Psdpfx Ajznvx Nsirjgu - 3 positions: 0° - 80° - 92° - Adjustable travel up to 40 meters - 2 remote controls - Ground rails and guides - 4 drive wheels - LENZE motor - LENZE control unit - Hydraulic unit and control cabinet integrated - Cable reel - Human-Machine Interface - Manufacturer's warranty: 6 months - Installation and commissioning available