Used Cnc Jig Boring Machine for sale (66,182)

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm Fodpfx Aaepqx H Totjpl C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Fpsdpfxozzwazj Aatel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX Fpjdpezp Dn Ijfx Aatjl X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! Payment for the machine is made in the usual manner for used machines, i.e., net payment before loading, no partial or installment payments! Special price due to business closure. HENRI HAUSER OP3 High-precision drilling machine / Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine/gauge drilling machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.00. It is worth noting that the machine has two Heidenhain digital displays with a total of 4 glass scales with a resolution of 1 My, also for the quill feed. This is a major advantage for precise drilling and milling in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and most likely no longer available. These machines are primarily used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds steplessly from 60 rpm to 3000 rpm Feeds: Drilling spindle carriage: 2 stages from 0.03 mm/rev to 0.06 mm/rev Fsdpfx Ajzuvwloatspl Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net for export within the EU. Example: Safe shipping by direct transport (without transshipment!) to France/Spain/Italy etc. up to 1700 km driving distance approx. 1100 - 1450,- EUR.

Condition: new, Year of construction: 2026, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm Fpjdpsd Hz Niefx Aatel • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: good (used), functionality: fully functional, machine/vehicle number: 901, travel distance X-axis: 370 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 405 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, table length: 500 mm, table width: 380 mm, spindle mount: MK 2, total height: 2,000 mm, total length: 1,590 mm, total width: 1,290 mm, quill stroke: 155 mm, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill. -Jig boring machine: including tool cabinet with various tools Fedpfxjzrmf Io Aatepl -Table dimensions 380 x 500 mm -Travel: Z 405 mm/Y 470 mm/X 370 mm -Quill stroke: 155 mm -Take: MK2 (plus outer cone for spindle tool) -Speeds: 75 - 2000 rpm -Machine dimensions: 1590/1290/H2000 mm -Machine weight: 1774 kg -Cabinet dimensions: 720/460/H1000 mm -Cabinet weight: 158 kg Price negotiable Rotary table shown in one of the pictures not included Worldwide shipping can be arranged at additional charges

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Fpedex Rhlcepfx Aatjl Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Used CNC boring and milling machine Manufacturer: WMW / UNION Gera Type: CBFK 130/2 Spindle diameter: 130 mm Manufacturer: VEB Werkzeugmaschinenfabrik UNION Gera Design: Traveling column boring machine (planer type) Tool magazine available CNC control retrofitted or modernized Weight according to nameplate: 28.3 t Connected power: 80 kW Control: Heidenhain control Technical data Fodpfx Aezffmksatjpl Spindle diameter: 130 mm Tool holder: ISO 50 Main drive: 32.4 kW Connected power: 80 kW Spindle speed: up to 3,000 rpm X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,275 mm W-axis spindle stroke: 400 mm B-axis: 360° Clamping surface: 1600 x 2000 mm Table load: 7000 kg/m2 Machine weight: approx. 28–30 t Tool magazine: 60 Year of manufacture: 2007 (general overhaul)

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB Fpedpjzucbqefx Aatel • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Fjdpjzzbcysfx Aatepl Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: Fodpfxszx Nxwo Aatjpl - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Fpedezzwa Iopfx Aatsl Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Year of construction: 1986, condition: excellent (used), functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Fedpfxezzw U Ej Aatopl Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T Fpsdezw A A Tepfx Aatjl

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Fpodpfx Aou Dahnjatel Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Fedszcqf Iepfx Aatopl Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Manufacturer: SIP, Switzerland Model: MP-5E Machine type: Coordinate drilling machine Longitudinal travel X: 700 mm Transverse travel Y: 500 mm Spindle travel: 180 mm Work surface of the table: 900 × 770 mm Max. distance table–spindle: 800 mm Min. distance table–spindle: 200 mm Clearance between columns: 875 mm Spindle sleeve diameter: 95 mm Spindle feed/increment: 5 mm Fpjdpfxozvxw De Aatsl Number of spindle speeds: 12 Spindle speed: 50–2,250 rpm Number of feed stages: 4 Feed rate during drilling: 0.04–0.21 mm/rev Max. table load: 600 kg Required electrical power: 5 kVA Machine weight: approx. 5,400 kg

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Fpedpfx Aajxcgtgetjl Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Fpjdszzwahepfx Aatsl Weight: 3 T

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 D PL Fsdjzc D Dwepfx Aatjpl Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 Fpsdpod Tk Stjfx Aatsl -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm y-travel 1 mm total power requirement 1 kW Fsdpfx Aeylzv Aoatjpl

Condition: used, TECHNICAL DETAILS CAPABILITIES - Movement on X-Y : 400 x 250 [mm] - Vertical slide stroke : 400 [mm] - Drilling spindle stroke : 130 [mm] - Clearance between spindle nose and table : 570 [mm] - Clearance between mount and spindle center : 320 [mm] Fpjdpfeuhbprsx Aatel TABLE - Useful surface : 595 x 320 [mm] - Movement X-X : automatic with ball screws - Drilling head - Internal taper : Morse 2 - Spindle speed : 60-3000 [rpm] - Spindle feed : 0.03-0.06 [mm/r] - Voltage : 3 x 380 V / 50 Hz - Installed power : 2.1 kW - Machine net weight : 1100 [kg] - Dimensions : 2050 x 1600 x 1900 [mm] EQUIPMENT - Digital display : X-Y - Circular table : Ø 300 - Machine lamp

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Fodpozc D E Iefx Aatopl Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1205-H740-00, overall weight: 6,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 50 mm, controller model: ANDRONIC 2060, No minimum price – guaranteed sale to the highest bidder! Fedpfx Aaozu Iwwjtjpl Submitting a bid obligates you to collect the item within the specified period, between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 50 mm Travel range, Z-axis: ±50 mm, relative to the central axis of the rotary indexing table / 200 mm Travel speed, X-axis: max. 30 m/min Travel speed, Y-axis: max. 20 m/min Travel speed, Z-axis: max. 30 m/min Acceleration, X/Y/Z-axis: 10 m/s² MACHINE DETAILS Control model: ANDRONIC 2060 Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,650 x 2,700 mm Total weight: 6,000 kg Operating voltage: 230/400 V Frequency: 50 Hz Rated apparent power: 12 kVA Swivel radius, control panel: approx. 1,050 mm