Used Jones Shipman 1400 for sale (3,341)

Condition: used, mileage: 33,976 km, power: 100 kW (135.96 HP), first registration: 05/1990, overall weight: 7,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 05/2020, gearing type: mechanical, Year of construction: 1990, Equipment: air conditioning, compressor, Unimog U 1400 two-way equipment Manufacturer : Two-way Hjdpfx Aaji R Aicjbonu converter Wagon brake system 600 tons Coupling rod support rear

Condition: excellent (used), Year of construction: 2019, Travel paths: X-axis 1,200 mm Hnsdpfx Aajvwmrisbou Y-axis 1,300 mm Z-axis 800 mm Spindle speed 14,000 rpm 6-way pallet changer 500 x 500 mm Special table with 8-way integrated zero point clamping system Machine has only 1,114 operating hours!

Condition: excellent (used), Year of construction: 1997, High-Performance 3-Bed CNC Lathe Manufacturer: Gurutzpe – Spain Model: B 1400/3 x 8000 Year of manufacture: 1997 Control: NUM Max. swing diameter over bed: 1,420 mm Center height: 710 mm Max. turning diameter over cross slide: 1,150 mm Max. turning length: 8,000 mm Chuck spindle power: 75 HP Chuck speed: up to 600 rpm (4-speed gearbox) Chuck torque: 16,000 Nm Hnedpfxew Snu Eo Aabeu Rapid traverse X/Z: 5,000 mm/min X-axis travel: 850 mm Z-axis travel: 8,000 mm Turret with automatic 4-position changer Max. workpiece weight without steady rests: 14,000 kg with 1 steady rest: 17,000 kg, with 2 steady rests: 19,000 kg Machine equipment: – 1 x travelling steady rest – 2 x fixed steady rests – 1 x chip conveyor

Condition: used, Checkweigher Continue weger Hnedpoxdkb Rsfx Aabsu Condition: Used Brand: LIEBER Model: LWS - 1400 Product weight: 100 grams to 6,000 grams Voltage: 230 volts Year of construction: 2009 Length: 155.00 cm Width: 80.00 cm Height: 165.00 cm All staff speak Dutch, German, and English. Prices are excluding VAT Shipping is possible (additional cost) (Technical data, information, and prices are subject to changes and errors. Subject to prior sale.)

Condition: ready for operation (used), Vibrating Chute Jöst Type: FUF Length 4500 mm – width 1400 mm with two pieces vibration motors of each 9,5 kW Hnodstznigjpfx Aabou

Condition: excellent (used), 4 kW motor Hnjdpfer Ddkajx Aabou Saw with scoring saw Adjustment of the cutting angle Adjustment of the cutting angle Table length 150 cm

Condition: good (used), Electric motor, three-phase motor, fan motor -Manufacturer: ELMO, electric motor fan motor -Type: QSB 71 B/4-2T -Power: 0.33 KW -Speed: 1400 rpm -Shaft: Ø 11 x 25 mm -Protection class: IP20 -Dimensions: 190/165/H125 mm Hnsdpfjrbm Tyjx Aabeu -Weight: 6.6 kg

Condition: used, Year of construction: 2012, Rotary sander with rollers for postformed workpieces with a vacuum system to hold the workpiece on the feed belt Machine dimensions: 1715 x 3235 x 2000 mm Working width: 1400 mm Working height: 100 mm Belt feed speed: 2-13 m/min Abrasive shaft rotation speed: 300-1200 rpm Support shaft rotation speed: 3-16 rpm Abrasive shaft length: 540 mm No. 8 (4+4) rotating abrasive shafts Abrasive tool diameter: 300 mm No. 336 total abrasive discs Main motor power: 5.5 kW Rotation motor power: 1.5 kW Height adjustment motor power: 0.3 kW Belt feed motor power: 0.3 kW 2.2 Vacuum fan motor power: 2.2 kW TECHNICAL DETAILS TO BE VERIFIED Hnjdjw E H R Topfx Aabou

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Hodpfxsxbgrgs Aabjnu Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2001, 2-station cell with ABB IRB 1400 welding robot (Under Storm) Year of production: 2001 Maximum reach: 1440 mm Maximum load capacity: 5 kg Welding source: KEMPPI 520 R Power of the welding machine: 520 A Hedpfxsgb Dx Ae Aabsnu Price: ̶1̶6̶ ̶0̶0̶0̶0̶ € - 25% - 12 000 €

Condition: ready for operation (used), Vibrating Chute Hazemag 4000-1400 Brand: Hazemag Dim. Vibrating Chute: Length 4000 mm – width 1400 mm. Driving: 2 pieces vibration motors of each 5,6 kW. Incl.: springs. Hedpenac Niofx Aabsnu

Condition: used, Semi-automatic PET bottle blowing machine Manufacturer: FERENC Type: F-1400 Manufacture date: 2006 Capacity: about 800 pcs / h Number of molds in the machine: 2 Furnace dimensions: - length: 900 mm - width: 900 mm - height: 1200 mm Blower dimensions: - length: 1800 mm - width: 750 mm - height: 2000 mm Weight of the set: 1200 kg Hodpsugu E Rsfx Aabjnu Technical condition: used machine

Condition: used, functionality: fully functional, Year of construction: 1986, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: CT12, bending force (max.): 225 t, working width: 1,400 mm, stroke length: 212 mm, number of axes: 3, table height: 800 mm, travel distance X-axis: 800 mm, overall weight: 22,000 kg, total length: 2,670 mm, total width: 1,690 mm, total height: 4,480 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, Equipment: documentation/manual, Used press brake with new integrated CybTouch 12 CNC control Hnedpswx Rl Ujfx Aabeu Oil cooling unit included, delivered with the machine Hydraulic punch clamping Back gauge X and R axes Available immediately

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, DGUV certified until: 09/2026, NEW NEW Divider/Weighing Machine NEW NEW Dough divider for stress- and oil-free dough processing Model: Slim 1400 Cylinder and piston made of high-quality stainless steel Teflon-coated stainless steel container with safety cover Maximum output: 1,100 pieces per hour Weight range: 200 to 1,400 g (depending on dough type) Only at our company DGUV V3 safety tested Electronically adjustable speed and piece counter Divider with manual weight adjustment Outfeed conveyor length: 50 cm Fully stainless steel construction Mobile machine with brake Connection: 400V, 1.6 kW, 16A CEE plug Brand new machine & SAB inspected 12 months warranty + spare parts service Optional: Leasing & rental service - Discharge conveyor up to max height 1650 mm - Automatic flour duster - Rounding module - 90 kg hopper - Raised base frame - Maintenance contract - Service package - Commissioning & on-site introduction with master baker Hnedpjrk Eabofx Aabeu Many other TOP dividers in stock!

Condition: defective spare-parts repository (used), Year of construction: 2022, operating hours: 200 h, functionality: not functional, For sale here is a block band saw from the company Drosten, the machine is currently in a defective condition. The block band saw is offered for sale with all attachments, operator's stand, and saw blades. Feel free to contact me with any further questions. Hjdpsw Tyngjfx Aabjnu

Condition: used, Year of construction: 1999, functionality: fully functional, UV varnish drying installation Hsdpoxb Dppjfx Aabonu UV dryer on UV line

Condition: used, mileage: 2,97,412 km, power: 100 kW (135.96 HP), overall weight: 7,500 kg, fuel type: diesel, color: green, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 6,300 kg, wheelbase: 2,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, loading space width: 1,850 mm, loading space length: 1,450 mm, loading space height: 400 mm, first registration: 05/2000, number of seats: 3, Equipment: ABS, all wheel drive, cabin, crane, differential lock, power assisted steering, trailer coupling, * German vehicle * One owner Hnedpswx R Icsfx Aabou * 6-cylinder engine * Condition, see photos * Palfinger crane foldable behind the cab * Type: PK 7000B * Lifting capacity at 1.8 m = 2,900 kg – 3.5 m = 1,700 kg – 5.2 m = 1,090 kg – 7.0 m = 800 kg – 8.7 m = 630 kg * 5th and 6th control circuit * 3 hydraulic extensions * Hook height 10 meters * 4 hydraulic outriggers * Remote control * Removable flatbed body * Body dimensions: L=1,450 x W=1,850 x H=400 mm * Trailer coupling * Towing capacity: 24,000 kg * Hydraulic connections for trailer * 3 seats * Differential lock * Sunroof * DIN lashing eyes * Comfort driver's air-sprung seat * Engine brake * Rotating beacons * Front tow coupling * 8-speed manual gearbox * Wheelbase: 2,600 mm * GVW: 7,500 kg * Unladen weight: 6,300 kg * Payload: 1,200 kg * For sales to traders and for export (non-EU and EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods, to avoid any misunderstandings regarding the condition and suitability. Viewing and inspection are possible at any time by prior appointment and are expressly desired. All information provided without guarantee. No liability will be accepted for errors or incorrect information in the offer. The buyer is obliged to independently confirm the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2001, product width (max.): 1,400 mm, Web width: 1400mm Unwind diameter: 800mm Rewind diameter: 500mm Maximum speed: 300m/min Integral unwind station with 76mm and 152mm air shafts Hydraulic roll lift and disc brake on unwind BST CLS Pro web guide unit for edge and line guiding Tension control via load cell mounted we path roller Infeed driven nip unit 3 motor dc drive system with analogue drive control Razor in grooved roller slitting station with several knife holders Edge trim removal fan Duplex cantilevered rewind with differential slip adapters Full width lay on roll assemblies with pneumatic application Side opening door for roll off loading with guard inter locks Off loading roll capstan unit Control panel with digital display and digital counter Hnodsrzu U Iepfx Aabeu Electrical diagrams

Condition: used, Meat mixer Hnsdpowi Smnefx Aabju CFS Capacity: 1400 liters Dimenzije: 2600 x 1700 x 2300mm

Condition: new, BRAND NEW 3-AXIS MACHINING CENTER HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 1,430 mm Y-axis: 670 mm Z-axis: 640 mm Table size: 1,500 x 620 mm Table load capacity: 1,200 kg Hjdpshy Atfsfx Aabjnu Spindle speed: 10,000 rpm (oil-cooled) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 32 kW ICS - internal coolant supply - 20 bar Rapid traverse: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer: 30 stations (optionally up to 60) Hinged belt chip conveyor 4th axis preparation (rotary table) Fully enclosed guarding Only inquiries from Germany will be answered.

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Hnedpfx Aouiykdsabsu

Year of construction: 2011, condition: ready for operation (used), Two identical injection moulding machines are available, 1x Krauss Maffei KM 420/6 2K, 420-1400-750 CXW, 1x KM 420/7 2K, 420-1400-750 CXW, clamping force: 420t, screw diameter: 55/40mm, weight: 23.49t, operating hours: 84,000/ 79,000h. Machine 1 is ready for operation, machine 2 is not ready for operation, there is a fault in the safety circuit. A comprehensive spare parts package is also available. An on-site inspection is possible. Hodpfowcf Sdex Aabsnu

Year of construction: 1961, condition: ready for operation (used), Cutting width: 1100mm, number of cutting blades: 11, material thickness: 0.1mm-1mm, max. winding diameter: 450mm, machine dimensions X/Y/Z: approx. 6000mm/4000mm/1900mm, weight: approx. 5000kg. On-site inspection is possible. Hnedet Siauopfx Aabju

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Hnodpfx Ajwa A Ttjabou

Year of construction: 2011, condition: ready for operation (used), A soldering booth including extraction is available. Documentation available. On-site inspection is possible. Hnsdpjvyr Nlsfx Aabeu