Used Ctx 400 for sale (18,434)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 60,837 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 635 mm, spindle motor power: 28,000 W, total width: 1,750 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, number of axes: 4, This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details. - Maximum swivel diameter over bed: 570 mm- Maximum swivel diameter over cross slide: 420 mm- Max. turning length: 635 mm- Bar diameter (main and counter spindle): 65 mm- Chuck diameter (max.): 250 mm- Speed range: 25 – 5,000 min⁻¹- Drive power (main spindle): 28 / 21 kW (100% / 40% duty cycle)- Max. torque (main spindle): 320 / 240 Nm- Drive power (counter spindle): 12 / 9 kW- Spindle bore: 79 mm (spindle bearing 120 mm)- C-axis: Available (for main and counter spindles / C-axis operation)- Control system: Heidenhain CNC Pilot- Machine width: approx. 1,750 mm (without auxiliary units such as chip conveyors)- Operating Hours: 60,837 h- Voltage: 400 V / 230 V / 24 V- Power: 44 kVA- Frequency: 50 Hz- Current: 64 A / 80 A- Included Accessories: 2x jaw chucks, 2x clamping chucks, soft jaws, base jaws, various collets (RD65, RD80, E185, E173, etc.), reduction tubes, chip conveyor (Bürener Maschinenfabrik), cooling unit/filter system, slotting unit (Hub 32), complete documentation manuals Technical Specification Counter Spindle Yes Tedpfx Abezvxkdoteb Driven Tools Yes

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor Tjdpezggahefx Abtsb

Condition: used, Year of construction: 1999, turning diameter / mm Tedpfx Abozu A Ttotsb turning length / mm control /

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Todsza E Sqepfx Abtob

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Tsdpfx Abszgupkotsb Very good condition, machine comes from a school Operating hours: 14,000

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational Tedpfxox Sw Uve Abtob lots of accessories

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA Tsdpfx Ajza D Rfsbteb EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation Tedpjzcd Hlofx Abtjb - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, number of axes: 2, Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1993- Condition: Good / Fully functional- Control: EPL 2- Attached Equipment: Extraction hose/pipe visible connected to the side enclosure Tjdpfezb E E Tex Abtsb Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1991, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, number of axes: 2, Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1991- Condition: Good / Fully functional- Control System: EPL 2 Tjdpfx Aezb Ewcsbteb Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1998, swing diameter max. over bed cover 570 mm swing diameter over face slide 420 mm control Heidenhain CNC PILOT longitudinal stroke 635 mm face stroke 220 spindle bore 79 mm Todpfx Aezcfc Isbtsb centre distance 1000 mm chucking diameter 250 mm tailstock taper MT 4 feed speed longitudal 0,025-24.000 mm/min. feed speed face 0,025-20.000 mm/min. power feed longitudinal 7.000 N Feed Force Face 3.500 N total power requirement 44 weight of the machine ca. 5,7 t dimensions of the machine ca. 7,5 x 4,0 x 1,7 m Accessories: - 3 clamping jaws - various tool holders

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 TECHNICAL AND VISUAL CONDITION: Very good Tsdpey Rbr Nefx Abteb Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain Tjdpfx Abjy A Imqsteb With conveyor With driven tooling With documentation

Condition: ready for operation (used), operating hours: 31,819 h, turning diameter over cross slide: 290 mm, turning length: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 645 mm, rotational speed (max.): 5,000 rpm, - CNC lathe with EPL 2 control, equipped with round magnet. It was last used for fine contour turning of hardened components. (without chuck, tailstock and chip conveyor) Technical data Swing diameter over bed: 300 mm Swing diameter over face: 290 mm Travel path X: 210 mm Tedpfxeqcu Uvs Abtob Travel path Z: 645 mm Speed range: 25 - 5000 rpm Tool carrier: universal disk turret Tool positions: 12 Tool holder: 30 mm (DIN 69 880)

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder • Max. spindle speed: 5,000 rpm Tjdsyxgi Nepfx Abtob • Max. turning diameter (X axis): 290 mm • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm • Spindle bore: Ø 66 mm • Chip conveyor included The machine is in very good condition and was previously used in a technical training facility.

Year of construction: 2001, condition: ready for operation (used), X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool cabinets and documentation. The main spindle produces running noise. An on-site inspection is possible. Tjdpfozrn H Tox Abtjb

Condition: new, For sale is a new, unused three-phase electric motor, LOHER ANGA-355LB-04A, with a power rating of 270 kW. The motor comes from warehouse stock (NOS – New Old Stock). It has never been installed or used. Its technical and visual condition is very good, with only minor signs of storage. Manufactured in Germany, it features a robust, industrial design. It is ideally suited for driving pumps, fans, compressors, crushers, conveyors, and other industrial machines. Todpezn Awxjfx Abteb Technical specifications: Manufacturer: LOHER Model: ANGA-355LB-04A Power: 270 kW Rotational speed: 1490 rpm Frequency: 50 Hz Voltage: 400/690 V (Δ/Y) Voltage range: 380–420 V Δ / 655–725 V Y Power factor (cos φ): 0.85 Protection class: IP55 Insulation class: F Mounting design: IM B3 Standard: EN 60034 / IEC 38 Country of manufacture: Germany

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V5 With driven tools , 2 x C axis + capture. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Manufacture date: 1999 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( all sockets driven ) - max rpm 5000/min. - max length of turning in Z axis: 570 mm - max diameter of turning in X axis: 300 mm - 2 x C axis - driven tools - capture spindle - chuck on main spindle E185 - handle on capture spindle E173 - max. shaft diameter Fi-65 mm - receiver of finished workpiece - tool measuring probe - cooling system - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.7 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work Tjdpfju Aardex Abteb - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tsdpfx Abov Epzvjtob Tool holders, chuck jaws

Condition: good (used), Technical data for the shelf connector: Shelf system: Nedcon Type: NS The scope of delivery includes: Tedpfx Aoir U N Ssbteb 01x Shelf connector, used Material color: cream white Overall length: approx. 400 mm Head plates: approx. 140 x 95 x 2.5 mm Hole diameter: approx. 12 mm Profile dimensions: approx. 70 x 70 mm Weight/piece: approx. 2.78 kg

Condition: good (used), Technical data for the extension plates: Manufacturer: Jung Heinrich Type: MPB Included in the scope of delivery: 02x extension plates, used Overall length: approx. 400 mm Overall width: approx. 129 mm Internal width: approx. 121 mm Suitable for frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing in depth: approx. 100 mm Hole spacing in width x height: approx. 85 x 100 mm Borehole diameter: approx. 10 mm Material color: blue Weight / piece: approx. 2.59 kg Note: Todjipt Ddspfx Abtjb No screws or fasteners are included in the scope of delivery.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm Tedpfsn R Egzex Abtob profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), We are offering a second-grade post protector from the manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Post protector, second grade Material color: yellow Design: V Overall height: approx. 400 mm Overall width: approx. 112 mm Internal width: approx. 104 mm Overall depth: approx. 60 mm Leg dimensions: approx. 65 x 65 mm Tedpfjhr U S Uex Abtob Material thickness: approx. 4 mm Grid/hole spacing: approx. 250 mm Number of holes: 04 pcs (02 pcs/side) Hole diameter: approx. 9 mm 04x Hex head screw: M8 x 35 mm 04x Lock nut: M8 04x Washers: M8 General information about the item: This item is offered for pickup only. Any additional desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Todpfx Asvmp I Sobteb Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkheads and base plates The stands are pre-assembled 2,278 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg max. load per shelf 200 kg with uniform distributed load 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bulkheads and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg Max. load per shelf 200 kg with uniform distributed load 01x base panel, used for floor length: 994 mm Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Piece: approx. 0.51 kg 05x shelf traverse, 2nd choice (new goods) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hooks) Weight | Piece: approx. 1.70 kg 15x compartment dividers, second choice (new goods) Material color: galvanized Type: APH 340 Total length: approx. 340 mm Usable length: approx. 315 mm Total width: approx. 100 mm Pipe diameter: approx. 12 mm Weight / piece: approx. 0.170 kg 01x cross brace, used Designation: KV31013 Tjdpfx Abevmxuhstob Material color: sendzimir galvanized Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.