Used Joystick for sale (689)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty container handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5 forward / 3 reverse gears Condition: Operational and fully functional Technical condition: very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% Elme 584 sidespreader, 20ft-40ft with twistlocks and hydraulic clamp for double box lifting, hydraulic center levelling of spreader +/-3°, hydraulic sideshift +/-600 mm Features: - Hydraulically extendable spreader support on lift mast (for safety of container checker) - Lifting suspension via hydraulic accumulator Nkedpeyr T D Sjfx Ah Rjw - Central lubrication system - Automatic travel speed reduction depending on lift height, mast tilt, and clamped containers - Engine pre-heating (230V) - One-touch function on the joystick for automatic spreader adjustment 20'-40' - Driver’s cabin with air conditioning and sun blinds - Air-suspended driver’s seat with headrest and heating Condition: checked, repaired, serviced and cleaned – ready for operation

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 5,867 h, load capacity: 3,000 kg, lifting height: 4,570 mm, fuel type: diesel, mast type: telescopic, construction height: 2,975 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,581 kg, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Operational and fully functional Technical condition: very good Front tires type: Super elastic Nedex Hlm Aopfx Ah Rekw Front tires size: 23x9-10 Rear tires type: Super elastic Rear tires size: 21x8-9 Description: The driver’s cab is lowered, side shifter and fork tines installed. Features: Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cab, interior mirror, joystick, windshield wiper, single-pedal control, LED, seat,

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 8,900 kg, empty load weight: 5,900 kg, maximum load weight: 3,000 kg, lifting height: 7,000 mm, tire condition: 80 %, drive condition: 80 %, chain condition: 80 %, axle configuration: 4x4, number of seats: 1, emission class: euro6, mast type: telescopic, shovel volume: 5 m³, brakes: other, Year of construction: 2016, operating hours: 7,101 h, Equipment: ABS, additional headlights, adjustable boom, all wheel drive, cabin, differential lock, gripper hydraulics, hydraulics, onboard computer, pallet forks, soot filter, traction control, Authorized Subaru dealer in Łaziska Górne is offering for sale a freshly imported telescopic handler. Brand: GENIE GTH 3007 – robust and reliable 4x4, perfect for construction, agricultural, and industrial applications. The machine is in excellent technical condition, comes from a well-funded Czech state-owned company, and has been serviced exclusively with genuine parts. Fully operational and ready for immediate work, featuring low operating hours. The price includes a full set of documents for registration. We offer every form of payment: Leasing, financing, cash, and bank transfer. With immediate payment by cash or bank transfer, you can drive away with your vehicle from the showroom. Additionally, we provide insurance services – we will calculate the lowest premium for any vehicle – TRY US! We also deliver purchased cars and trucks to any address throughout Europe. For further information about our services, please contact our sales representatives. TECHNICAL DATA: Maximum lifting capacity: 3,000 kg Maximum lifting height: 6.89 m Maximum reach: 4 m Length: 4.71 m Nodpfx Aoywaqdoh Rjkw Width: 1.99 m Height: 2.07 m Operating weight: 5,900 kg EQUIPMENT: Bucket for loose materials 500/800 L bucket Floating forks L=1200 mm (100x50 mm) Hydraulic quick coupler for attachments FEATURES: Pneumatic off-road tires Rotating turret Ergonomic, adjustable joystick and steering wheel Operator seat with presence sensor Air conditioning Clear dashboard indicators in the cab Cab roof window Strobe warning light Overload protection system (visual + audible) Machine inclination indicator Front stabilizer outriggers Main electrical line on the boom Special air filter The listed price is net and applies to export and business customers. Significant discount possible for private customers – Please contact us directly by phone for your best price :)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 884 h, load capacity: 2,500 kg, lifting height: 6,800 mm, free lift: 2,300 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 1,150 mm, empty load weight: 4,272 kg, total length: 2,518 mm, drive type: Elektro, construction width: 1,760 mm, opening width: 2,150 mm, Four-way reach truck Load centre: 600 Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Technical condition: very good Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2015 Battery condition: 60 - 80% Description: Recent inspection and UVV Clamp fork, 3rd valve, front work lights, roof cover, full free lift, interior mirror, joystick, single pedal control, 4-way reach truck, electric steering, electric brake, joystick (Solo-Pilot), clamp fork (opening width 2,150 mm), battery residual capacity after test: 74% Nkodpsytkdxsfx Ah Rew

Condition: used, Year of construction: 2015, load capacity: 4,999 kg, lifting height: 20,600 mm, total length: 7,730 mm, ・Allradantrieb - Allradlenkung ・Hydrostatischer Antrieb: Hydrostatischer Antrieb mit automatischer Leistungsregulierung (Verstellpumpe und Verstellmotor hydraulisch regulierbar), Elektromagnetischer Fahrtrichtungsschalter 2 Vorwärts - und Rückwärtsgänge ・Niveauausgleich ・Hydraulisch unterstützte Scheibenbremse: im Ölbad in beiden Achsen, Negativhandbremse Nkjdpoxin Rajfx Ah Rew ・Motor: wassergekühlt, Direkte Einspritzung ・Fahrgeschwindigkeit max: 36 km/h(Die Geschwindigkeit ist den lokalen Bestimmungen angepasst) ・In TUV-Version: 20 km/h ・Niveauausgleich in der Vorderachse +/- 8° (15%): Hinterachse wird bei Drehbeginn (mehr als 15°) automatisch blockiert (Hydraulischer Verriegelungszylinder) ・ Teleskopstabilisatoren: Die Stabilisatoren sind einzeln oder simultan ansteuerbar ・endlos drehbar: Oberwagen montiert auf einem Drehkranz mit Doppellaufring und Innenverzahnung, Hydraulische und elektrische Drehdurchführung ・Hydraulik: 3 Zahnradpumpen: 270 bar/160 l/mn ・Hebel : 2 Joysticks mit proportionaler Ansteuerung aller Hydraulikbewegungen Behälter/Inhalt ・Kühlsystem: 18 l ・Motoröl: 15 l ・Hydrauliköl: 200 l ・Kraftstoff: 230 l

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 6,800 h, load capacity: 6,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: triplex, power: 75 kW (101.97 HP), motor manufacturer: Perkins, gearing type: hydrostat, battery voltage: 12 V, fork carriage width: 1,800 mm, fork length: 1,500 mm, Equipment: CE marking, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, For sale: Ranger all-terrain forklift! Excellent machine for a sawmill, featuring a large tilt angle, free lift for indoor operations, fork positioner, and integrated side shift – all functions operated via joystick! Great machine, come and see it and take it for a spin! On-board scale included. Helene Fischer is also playing on the radio :) Nksdsyvyr Sepfx Ah Rew

Condition: excellent (used), functionality: fully functional, power: 185 kW (251.53 HP), gearing type: hydrostat, fuel type: diesel, color: blue, operation weight: 2,200 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2021, emission class: euro5, brakes: other, Year of construction: 2021, Equipment: additional headlights, all wheel drive, differential lock, hydraulics, onboard computer, standard shovel, trailer coupling, MultiOne 5.3 K Compact Loader (Series 4–5) from year of manufacture 2021 in very well-maintained, ready-to-work condition. Nkjdpfx Aeyw Rd Uoh Rjw This compact yard and wheel loader impresses with its high performance, maneuverability, and versatile range of applications. Ideally suited for landscaping, municipal services, agriculture, and the construction industry. Equipped with a reliable Kubota D1305 3-cylinder diesel engine (Stage V), all-wheel direct drive, and high-performance Hi-Flow hydraulics, the machine delivers excellent efficiency in daily operation. Operation is convenient via a multifunction joystick. Additionally, the machine features an LCD display with comprehensive function indicators. The self-leveling double H-frame ensures precise operation and high stability. Thanks to the hydraulic quick coupler, attachments can be changed quickly and easily. Features: - All-wheel drive (4x4) - Hi-Flow hydraulic system - Hydraulic quick coupler - Locking differential - Multifunction joystick - LCD display - Auxiliary work lights - Trailer hitch - Additional counterweight 180 kg - Safety and warning lighting (StVZO compliant) - Road approval The machine is in very good condition, immediately ready for use, and can be inspected and tested by appointment.

Condition: excellent (used), functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, empty load weight: 10,850 kg, lifting power: 7,200 kg/m, lifting height: 10,000 mm, Year of construction: 2012, operating hours: 6,898 h, Equipment: additional headlights, all wheel drive, cabin, pallet forks, standard shovel, trailer coupling, Telehandler MERLO P 72.10 Year: 2012 According to meter: 6,898 operating hours Perkins engine with 75 kW Hydrostatic transmission with 2 speed ranges 7.2 tons lifting capacity 10 meters lifting height Nkodpfoynrtwjx Ah Rsw - incl. forks - incl. bucket - hydraulic quick coupler - additional hydraulic circuit up to fork carriage - self-leveling - upper carriage side shift - all-wheel drive - 3 steering modes - joystick control - lighting system with indicators - immediately operational! - original paint! - well maintained! - incl. all documents! Sales price: €34,900 net Affordable delivery possible!

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 9,245 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, construction height: 3,000 mm, power: 65 kW (88.38 HP), motor manufacturer: Kubota, gearing type: hydrostat, Equipment: all wheel drive, cabin, lighting, pallet forks, COMBILIFT C5000SL Diesel 4-Way All-Wheel Drive Forklift Year: 2006 According to the hour meter: 9,245 hours 5-ton lifting capacity 3 m overall height 4.1 m lift height 65 kW Kubota engine Front and side-loading forklift in one machine! - Good tires! (2 are new) - Looks like NEW! - Cabin with heating - Work lights - Lighting system Nkedpfxsynrtks Ah Rjw - Joystick control - Fork positioner - Immediately ready for operation! Sales price: €17,900 net Economical delivery available!

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Nkjdpfx Ahow E Ei Us Rjw Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,270 h, travel distance X-axis: 1,505 mm, travel distance Y-axis: 3,005 mm, travel distance Z-axis: 210 mm, number of axes: 5, This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details. • 1500x3000 Table • 30HP Hyperthermal Pump • 4100 Bar Pressure • 1290 Hours • Joystick (Faulty, needs repair or removal, but functions without the option) Additional equipment • Cooling Radiator with Barrier and Hardware • Salt Softener Included • Consumables Included • Pump/Tank/Filter Drain for Sale Nkodpfx Ahsytf T Io Row

Condition: used, Year of construction: 2012, operating hours: 4,058 h, lifting height: 5,650 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, total height: 2,400 mm, total length: 1,800 mm, total width: 1,250 mm, color: other, Empty weight: 3.496 kg Lifting capacity: 1.400 kg - Year: 2012 - Documentation available: Yes - └ Type Documentation: User manual - CE certificate present: No - Serial number: 511801C00159 - Operating hours: 4058 - Lifting capacity: 1400kg - Lifting height: 5650mm - Overhead clearance: 2400mm - Free lift: 2000mm - Fork length: 1200mm - Attachment: Side-shift - Options: Joystick - Mast: Triplex - Drive: Electric - Brand/Type: Hoppecke 5PZS 775 - Battery year of construction: 2016 - Capacity: 775Ah - Battery voltage: 48V - Driving direction: 2 Road - Transport dimensions: 1800mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3496kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Nsdpfoyt Hxfsx Ah Rekw

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,040 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l Nodjyrunfspfx Ah Rskw - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 20,800 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. Njdsyrum Uopfx Ah Rokw - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,625 h, Equipment: air conditioning, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Nkodpfxeyua E Uj Ah Row Identification Serial number: DHKCEBBWTG0001283 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Demolition/FOPS cab guard - Ditching/grading bucket - Hammer/shear hydr. circuit - Hammer protection circuit - Hydraulic adjustable boom - Joystick control - Rotating beacon - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit - Steel tracks

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 9,997 h, Equipment: air conditioning, Technical information Chassis type: articulated Empty weight: 29.700 kg Make of engine: D13H Nkjdpfsyt Dagjx Ah Rew Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: VCEL180GA00019984 Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 9,1x3,6x3,9 Production country: SE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - 3rd hydr. circuit - Auto / hydraulic quick coupler - Auto lubrication system - Battery disconnector - Joystick control - Machine control system - Standard digging bucket - Weighloader

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, color: yellow, Year of construction: 2024, operating hours: 10 h, Technical information Chassis type: articulated Empty weight: 5.710 kg Make of engine: C2.8 Top speed: 20 km/h Functional Bucket capacity: 0,95 m³ CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Serial number: CAT00906JHZ601653 Other information EPA Marked: yes Tyre brand: Goodyear Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 5,527x2,55x2,55 Production country: UK Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = Njdpfx Ahjyt Daas Rskw - 3rd hydr. circuit - Additional hydraulics - Auto / hydraulic quick coupler - Battery disconnector - Forks - Joystick control - Machine control system - Mudguards - Standard digging bucket

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,500 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Battery disconnector - Ditching/grading bucket - GPS - Hammer/shear hydr. circuit - Hammer hydr. function - Hammer protection circuit - Joystick control - Machine control system - Rotating beacon - Safety line rupture valve - boom/hoist Nedpfxeyt A Uio Ah Rjkw - Safety line rupture valve - dipper/stick - Steel tracks

Condition: good (used), power: 121 kW (164.51 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 7,700 h, Technical information Track width: 90 cm Empty weight: 22.100 kg Make of engine: C4.4 Functional Bucket capacity: 1 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT00320HHEX01112 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3,3x3,2 Production country: JP Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Auto / hydraulic quick coupler - Ditching/grading bucket - Hammer/shear hydr. circuit - Hammer hydr. function - Hammer protection circuit - Joystick control - Machine control system - Quick coupler - Rotating beacon - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick Nkodpfxsyt A T Sj Ah Rsw - Steel tracks

Condition: used, functionality: fully functional, machine/vehicle number: 516043002148, Year of construction: 2003, operating hours: 8,528 h, load capacity: 8,528 kg, lifting height: 4,930 mm, free lift: 1,200 mm, fuel type: electric, mast type: triplex, construction height: 2,230 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516043002148 Load center: 500 mm Mast type: Triplex Condition: Refurbished with warranty Technical condition: Good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 80V Battery capacity: 560Ah Battery type: PzS Battery year: 2014 Description: Service + new UVV inspection Rotator, sideshift, fork positioner, 3rd valve, front working lights, full free lift, joystick, Nkjdpfx Aoyw Dqnsh Row Capacity with attachment: 1,700 kg; fork adjustment from 550 mm to 1,800 mm

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 655 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Non Marking Front tyres condition: 80 - 100% Rear tyres type: Non Marking Nedpjyru Irefx Ah Rskw Rear tyres condition: 80 - 100% Battery voltage: 48V Battery type: PzS Battery year: 2022 Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, road approval (STVZO), full cabin, safety light, non-marking tyres, joystick, LED,

Condition: new, Year of construction: 2024, fuel type: diesel, power: 74 kW (100.61 HP), fork length: 1,200 mm, color: red, Lifting capacity: 4,000 kg. Maximum lifting height: 17.55 m. Nedjvz Uckepfx Ah Rokw Maximum forward reach: 13.08 m. Unladen weight: 12,560 kg Forks: 1,200 mm. Controls: JSM Joystick Only for export outside the EU. = More information = Transmission: Torque converter Year of manufacture: 2024 Lifting capacity: 4,000 kg

Condition: ready for operation (used), Year of construction: 2017, This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Additional equipment • Energy chain for plasma operation • Environmentally friendly extraction system with sectional distribution • Automatic gas console for monitoring and controlling gas flow and pressure Machine Benefits Technical Machine Benefits Nksdox D R S Aopfx Ah Row • High-quality ac servo motors for movement • Automatic initial height detection via nozzle contact • Optimal cutting quality with customized gas mixture • Excellent extraction quality with designed cross distributors • Plasma and oxyfuel cutting • Total table elements: 4 • Dimensions per table element: 2080 × 2100 × 950 mm • Continuous usable work surface: 2000 x 8000 mm (vertical cutting), 1500 x 8000 mm (angled cutting) • Movement feed: 10 to 15000 mm/min rapid traverse: 25000 mm/min • Double-sided, synchronized longitudinal drive via pinion and rack with brushless ac servo motors Extra Information Control Unit CNC path control with Windows 8.1 operating system 17" TFT color monitor - Touch Full HD IPC-based with AMD CPU 4x2.0 GHz SSD 64 GB, 4 GB RAM (upgradeable to 16 GB RAM) Ambient temperature +5°C to +45°C at max. 90% humidity, non-condensing 100-240 V AC input voltage Integrated network card Joystick for manual movement Remote maintenance service Cutting range: 0° to 50° vertical stroke Compressed air requirements: max. 7 bar, cleaning pressure 6-7 bar Sound level during filter cleaning: ≤ 75 dB(A)

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock Nkodpex D D Abefx Ah Row • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere Nksdpfx Ahjyaacqs Rjw • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm