Used Joystick for sale (721)

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,040 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN Kodpfx Aaex Avwzenonf - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie

Condition: used, functionality: fully functional, power: 28 kW (38.07 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 3,800 kg, operation weight: 3,800 kg, lifting power: 1,500 kg/m, lifting height: 2,700 mm, tire size: 11,5/80-15,3, axle configuration: 4x4, digging bucket width: 1,600 mm, Year of construction: 1994, operating hours: 4,340 h, machine/vehicle number: 4240120, Equipment: 4 in one shovel, additional headlights, all wheel drive, cabin, differential lock, pallet forks, A small yet powerful Liebherr wheel loader. The loader has an operating weight of approximately 3.8 tons, a dump height of approximately 2.30 meters, and a lift capacity of approximately 1500 kg on level ground. The small turning radius of the all-wheel-steered wheel loader allows it to work even on the tightest construction sites. Despite its older model year, the loader has only 4,300 hours on the clock and is in good used condition. The reliable Deutz diesel engine starts reliably even in colder temperatures. The engine and hydraulic pump have sufficient power and are dry. All bearings have very little play. TECHNICAL DATA: * Manufacturer: Liebherr * Type: L504 * Year of manufacture: 1994 * Operating hours: approx. 4,340 hours * Engine: Deutz diesel engine F3L1011 * Power: 28 kW (38 hp) at 2,500 rpm * Drive: hydrostatic all-wheel steering * Oscillating rear axle with a maximum tilt of 10 degrees * Brakes: hydrostatic / mechanical * Travel speed: continuously variable * 1st gear: 0-5 km/h * 2nd gear: 0-20 km/h * High and low gears * Turning radius with bucket: 3,580 mm * Kinematics: single parallel * Digging depth: 42 mm * Back/dump angle: 41 / 40 degrees * Ground clearance: 265 mm * Limited-slip differential: automatic * Lifting capacity: 32.5 kN * Breakout force: 24 kN * Tipping load: 2450 kg * Payload with fork (flat terrain): approx. 1500 kg * Dumping height at a 40-degree dumping angle: approx. 2.32 m * Max. height (bucket pivot point): approx. 2.90 m * Max. height (bucket top edge): approx. 3.64 m * Dumping range: 575 mm * Stacking height: approx. 2.70 m * Tires: Pneumatic tires * Front tires: 11.5/80-15.3 * Rear tires: 11.5/80-15.3 * Incl. pallet fork * Incl. 4-1 bucket * Incl. joystick lever with floating position Knjdpfxsv Su Izs Aanof * Incl. mechanical quick-change system * Incl. complete lighting system * Incl. heating/ventilation * Incl. front and rear window wipers * Incl. ROPS/FOPS cab * and much more * Maximum axle load (axle 1): 2500 kg * Maximum axle load (axle 2): 3000 kg * Maximum gross vehicle weight: 4000 kg * Total length (incl. bucket): approx. 4.45 m * Total width (incl. bucket): approx. 1.60 m * Total height: approx. 2.46 m * Dead weight: approx. 3800 kg * Serial No.: 4240120 You are welcome to inspect this and all other equipment by appointment, test it on-site, or take it for a test drive. If you have any questions about our machines, please feel free to contact us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 900 kg, type of cooling: air, laser power: 450 W, input frequency: 60 Hz, power: 45 kW (61.18 HP), ALW 450 F Available in 8 - 14 weeks Application The ALW is a comfortable, ergonomic and compact seated workstation that offers plenty of legroom. The observation optics offer a variable viewing angle in the range 10°-50° and thus enable comfortable working. The closed, laser-safe housing makes the ALW a laser-protected workstation that can be used in a normal production environment without additional safety precautions. The fiber source has a high energy efficiency and is ideally suited for reproducible welds, as the laser power is constant during the welding process. Welding can be carried out in CW mode or pulsed. The ALW is ideal for series applications. The NC software is integrated. Programming and teaching is carried out directly on the 12.1" touchscreen display. Additional I/Os are also available. There is also an automatic wire feeder. The "BKS" (User Coordinate System) and "Individual Teaching" functions support toolmaking. SN: 00010419-04.19 Equipment ALW 450F Language package ALW F German Leica Ergo tube incl. 10 x eyepieces Tilt and swivel objective LED-UW Articulated arm joystick ALW 200/300 Kederww Ibopfx Aansnf R-axis preparation ALW 200/300 Rotary axis D125 cpl. Camera SET ALFT-HDMI Monitor 23" Air purge OPTIK OPTIK cooling unit Technical data Type ALW 450F Condition Conventional signs of use Year of construction 2019 Laser type fiber Laser protection class 4 (1 when used with working chamber) Average power 450 W Pulse energy 45 J Pulse peak power 4.5 kW Pulse duration 0.2 ms - CW Pulse frequency single pulse - 100 Hz Focal spot 0.2 - 3 mm Focal length 150 mm Electrical connection 3 x 400 V, 50-60 Hz, 3 x 16 A N/PE Space requirement (L x W x H) 119 x 140 x 174 cm Weight approx. 900 kg

Condition: used, Year of construction: 2018, operating hours: 9,918 h, lifting height: 6,200 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, fork width: 700 mm, total height: 2,600 mm, total length: 1,600 mm, total width: 1,270 mm, color: other, Empty weight: 3.279 kg Lifting capacity: 1.000 kg - Year: 2018 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 511900J00120 - Operating hours: 9918 - Lifting capacity: 1000kg - Lifting height: 6200mm - Overhead clearance: 2600mm - Free lift: 2200mm - Fork length: 1150mm - Maximum fork width: 700mm - Minimum fork width: 0mm - Attachment: Side-shift Knodpfjxu Hm Rsx Aanef - Options: Joystick, Non-marking tires, Free-lift - Mast: Triplex - Drive: Electric - Brand/Type: 04EPZV0480SC - Battery year of construction: 2020 - Capacity: 480Ah - Battery voltage: 48V - Driving direction: 2 Road - Transport dimensions: 1600mm x 1270mm x 2600mm (l x w x h) - Transport weight [kg]: 3279kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11886=GP3980, Year of construction: 2008, load capacity: 4,500 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: free lift with telescopic boom, construction height: 2,950 mm, power: 106.65 kW (145.00 HP), motor manufacturer: Iveco, gearing type: automatic, overall weight: 14,500 kg, total height: 2,950 mm, total length: 6,600 mm, total width: 2,400 mm, color: green, Equipment: all wheel drive, cabin, head guard, lighting, pallet forks, power assisted steering, trailer coupling, Telescopic Handler Merlo 4521 MCSS, Ksdpfx Aasx Ir Ntonsnf Equipped with a 6-cylinder Iveco turbo diesel engine, hydrostatic drive, 2-speed transmission (11/20 km/h), tires 18-22.5 16 PR Mitas MPT06, cab with heating and air conditioning, split door, 360° all-round visibility, adjustable seat, front, rear, and roof wipers, sun blind, 5-in-1 joystick (electro-proportional), fully electronic control of all functions, 4-section telescopic boom, hydropneumatic self-levelling (automatic or manual control), 4 outriggers, continuous rotating slewing ring, hydraulic steering (3 steering modes), permanent all-wheel drive, fixed front axle, oscillating and lockable rear axle, disc brakes, parking brake, computer-assisted stabilisation control (MSCC system), 12V electrics, platform pre-installation, hydraulic quick-change system "ZM2", including remote control, pallet fork, large work platform, 900 L bucket, and winch.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,634 h, load capacity: 2,500 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: simplex, construction height: 2,260 mm, drive type: Diesel, Diesel forklift Kedox A I S Ropfx Aanenf Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires condition: 20 - 40% Description: The vehicle undergoes UVV inspection. Prior to delivery, the machine receives maintenance and is cleaned. Repainting is available upon request. 3rd valve, 4th valve, rear work lights, heater, joystick, seat,

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler Knsdpfx Aaex Avwhenjf - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,595 h, load capacity: 10,000 kg, lifting height: 18,800 mm, mast type: duplex, power: 185 kW (251.53 HP), Empty container handler Load center: 1220 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Super elastic Front tires size: 14.00-24 Front tires condition: 60 - 80% Rear tires type: Super elastic Rear tires size: 14.00-24 Rear tires condition: 40 - 60% electrical pre-heating for engine and driver's cabin central greasing system hydraulic center levelling of spreader +/-3° wheel nut protection on steering wheels additional working lights: 4x on cab roof, 2x on mast Kjdjx Alrhopfx Aanenf driver's cabin with electronic air conditioning air-suspended driver's seat with heating and seat belt rear view camera joystick control

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Ksdpfx Aajxn Ax Ajnjnf

Condition: used, Year of construction: 2017, operating hours: 6,882 h, lifting height: 5,000 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, fork width: 650 mm, total height: 2,200 mm, total length: 1,900 mm, total width: 1,270 mm, color: other, Empty weight: 3.594 kg Lifting capacity: 1.400 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 511902H00950 - Operating hours: 6882 - Lifting capacity: 1400kg - Lifting height: 5000mm Kedpfjxu Hm Djx Aansnf - Overhead clearance: 2200mm - Free lift: 1750mm - Fork length: 1150mm - Maximum fork width: 650mm - Minimum fork width: 0mm - Attachment: Side-shift - Options: Joystick, Free-lift - Mast: Triplex - Drive: Electric - Brand/Type: 5PZS700 - Battery year of construction: 2022 - Capacity: 700Ah - Battery voltage: 48V - Driving direction: 2 Road - Transport dimensions: 1900mm x 1270mm x 2200mm (l x w x h) - Transport weight [kg]: 3594kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC Kedpfx Aoxzth Ieanonf - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: used, Year of construction: 2017, mileage: 55,833 km, power: 72 kW (97.89 HP), first registration: 04/2017, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 1,480 kg, empty load weight: 3,520 kg, wheelbase: 2,250 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: none, total height: 55,000 mm, number of seats: 2, construction height: 20,50,000 mm, Equipment: additional headlights, air conditioning, cabin, cruise control, differential lock, immobilizer system, parking sensors, power assisted steering, soot filter, * German vehicle * Single owner, with only 7,199 genuine operating hours and a mileage of 55,833 km * Condition: see photos * Sweeper from the Swiss premium manufacturer Boschung, offering the highest suction power in its class * High-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt * Boschung S3 KÜPPER-WEISSER compact sweeper, sweeping width up to 2.70 m * 2.5 m³ debris container * 460-liter fresh water tank * Washing beam nozzles for dust suppression and washing away contamination * Third disc brush, extendable and swiveling on both sides * Disc brushes controllable via joystick on the door armrest * Four-wheel steering with a turning radius of 7.50 m * Air-conditioned and sound-insulated driver cabin * Three disc brushes with integrated steel bristles * Standard sweeping width 2.10 m, expandable to 2.70 m * Hydraulic articulated arms * Suction nozzle with 650 mm diameter * Rear-mounted leaf vacuum * Maximum speed: 50 km/h * Working speed up to 25 km/h * 4-cylinder turbo diesel engine with 72 kW * Ideal for pedestrian zones, bike paths, roads, and surfaces * Multiple work headlights for optimal illumination * Reversing camera with LCD monitor * Electrically heated exterior mirrors * Wheelbase: 2,250 mm * Gross vehicle weight: 5,000 kg * Curb weight: 3,520 kg * Payload: 1,480 kg * Self-propelled working machine * For sales to businesses and for export (EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, no new DGUV, no new SP, and no new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods, so that no false expectations arise regarding the condition and suitability for the buyer. Viewing and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Knsdpfxexdmqzj Aanof Subject to alterations, prior sale, and errors.

Condition: new, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,000 mm, fork length: 1,200 mm, total length: 8,830 mm, - Drehbarer Teleskopstapler RTH 6.25 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 25,00 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss/Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe, Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Typ Achsen mit Planeten-Endantrieben Kjdpfx Aox Avvwjansnf - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 6.390 mm - Dieselkraftstoff 175 l - AdBlue 10 l - Hydrauliköl 165 l - Motoröl 9l - Kühlflüssigkeit 20l - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss/Casappa - Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss – Valvola elettroproporzionale SIL 2 - Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung , Steuerung mit CAN-Bus-Technologie

Condition: used, mileage: 165 km, power: 96 kW (130.52 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,474 mm, total height: 2,500 mm, loading space length: 3,645 mm, loading space width: 2,138 mm, Equipment: air conditioning, central locking, soot filter, Internal number: 89407 Errors and prior sale reserved! ---- SPECIAL EQUIPMENT * Passenger airbag – with airbag deactivation function * Fixed tow bar, 13-pin socket – incl. trailer stabilization (TSC) * Exterior mirrors, long arm – with integrated turn indicators * Technology Package 24: Heated windshield – wipers with rain sensor – active emergency braking assistant (camera-based) – lane assist with driver fatigue warning and high-beam assistant, additionally with lane keeping assistant – headlights with day/night sensor – cruise control – reversing camera and preparation kit – Ford audio system with 4-inch multifunction display * Conversion by Kunath: Tipper conversion kit (hot-dip galvanized, electrohydraulic drive, remote control in cab, 4-stage telescopic cylinder) – Western Defender 72 snow plow (2180 mm wide, PE scraper bar, headlights on plow, joystick remote control in cab, HARTING industrial connector) – Spread body 500L Electro Poly Spreader HTS500 – LED yellow warning beacon – Warning markings FURTHER EQUIPMENT * 1 battery * Driver’s airbag * Anti-lock braking system with electronic brakeforce distribution (EBD) * Exterior mirrors, electrically adjustable and heated – with integrated turn indicators * Battery: programmable battery runtime, preset to 10 min * On-board computer with consumption and mileage data (e.g. range), as well as outside temperature display and Ford ECO-Mode * Roof, front overhead storage compartment * Headlining in driver’s cab * Roof marker lights * ESP with traction control – hill-start assist – side wind assist – emergency brake assist – rollover protection – emergency brake support incl. emergency brake light – additionally with trailer stabilization only in combination with tow bar * Front electric windows – with quick down/up function for driver’s side * Electronic handbrake * Ford Easy Fuel – comfort fuel cap and misfueling protection * FordPass Connect incl. live traffic information and WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield Knjdpfx Aajxzmqcjnjf * Lockable glove compartment * Interior lighting with delay function and front reading lights * Fuel tank 70 l * Emergency call assistant * Particle filter: diesel particulate filter * Drop-side platform: standard (wide) – front bulkhead extension, retaining straps for side gate * Full wheel trim covers * Tire repair kit * Tire pressure monitoring system * Wheels: steel rims 6.5 J x 16 with 235/65 R16 tires * Wipers with rain sensor * Headlights: halogen low beam with daytime running lights * Power steering * Seat belts – front belt tensioners and force limiters * Seat Package 18A – driver’s seat, 4-way adjustable – front double passenger seat, 2-way adjustable – height-adjustable headrests – folding tray on double passenger seat – inner armrest for driver – lumbar support for driver – seat upholstery: fabric * Start-stop system * Front bumper * Recirculation control * Immobilizer * Heat-insulating glass, lightly tinted * Central locking with remote control – 2 keys, one with remote ...and much more. ---- One owner. German specification. Errors and prior sale reserved. 2 years factory warranty from initial registration (extendable on request). We are happy to accept your vehicle as trade-in. Financing/leasing possible without down payment! If you have any qu

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,039 h, load capacity: 2,500 kg, lifting height: 3,670 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,525 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork carriage width: 1,040 mm, fork length: 1,200 mm, tire condition: 90 %, front tire type: cushion tires (black), front tire size: Fabrikneu, rear tire type: cushion tires (black), drive type: Elektro, Equipment: UVV, cabin, lighting, pallet forks, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: Brand new Front tires condition: New Knodpfx Ajx Ixpgsansf Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: Battery tested with 76% remaining capacity Battery type: PzS Battery year: 2015 Description: Overhauled, serviced and tested according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, joystick, LED.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 2,045 h, load capacity: 3,500 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: telescopic, construction height: 2,220 mm, fork carriage width: 1,200 mm, empty load weight: 5,600 kg, total length: 3,106 mm, drive type: Diesel, construction width: 1,300 mm, Telescopic forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Technical condition: normal Front tire type: Solid rubber Front tire size: 27x10-12 Rear tire type: Solid rubber Rear tire size: 23x9-10 Battery voltage: 12V Knodpfxowkyd De Aanof without bale clamp Rear work lights, front work lights, heater, full cab, CE certificate, safety light, Kohler 2.5L 4-cylinder diesel engine with 46 kW/62 hp Hydrostatic transmission with electronic control Servo joystick operation Rated capacity: 3,500 kg at 500 mm load center Industrial fork carriage FEM3, fork carriage tilt angle: 111 degrees 2 auxiliary hydraulic circuits, 70 l/min, incl. 1 set of quick couplers Logistics specification Plastic seat Radio installation kit Load moment indicator with overload cut-off according to EN 15000 Main battery switch Exhaust directed upward Rotating beacon Fork carriage with continuous shaft Grease gun Reverse alarm Overhead guard roof grid Fire extinguisher 2 additional front headlights for machines without a protective grid Wrap guard for drive motors

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 2300 mm Measurements depth 5400 mm Measurements height 2100 mm Machine weight 8600 kg Control Unit Brand SIEMENS Model Siemens 828D ShopTurn Touchscreen Control Main Drive Spindle bore 160 mm Number of axis 2 Workpiece Workpiece drm over bed 780 mm Workpiece drm over support 535 mm Tail Stock Ksdpfx Aaex D Sw Tjnonf Pinol diameter 105 mm Pinol tool taper MT6 Additional Equipment Various Chuck Sizes depending on Machine Air Assist ‘Floating’ Tailstock with Towing Hitch Joystick Control for Rapid Movement Coolant // Worklight Automatic Lubrication Electromagnetic Spindle Brake Chuck Guard (Interlocked) // Swarf Guard (Interlocked) Dead Centres and Sleeves Networking // USB Port Compact Flash Card Slot This XYZ XL780 was manufactured in 2015. A robust horizontal turning machine featuring a Siemens 828D ShopTurn control, it offers a swing over bed of 780mm and a maximum cutting length of 2,900mm. The spindle supports a 160mm diameter with speeds up to 1300 rpm. Includes a 3-jaw manual chuck and multiple steady rests. If you are looking to get high-quality turning capabilities consider the XYZ XL780 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,183 h, load capacity: 3,500 kg, lifting height: 3,650 mm, fuel type: diesel, mast type: simplex, construction height: 2,500 mm, power: 44 kW (59.82 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,735 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,400 mm, Diesel forklift Load center: 500 mm Fork width: 80 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic Speed class: 20 Condition: Operational and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 23x9-10 Description: Read-off operating hours. Inspection possible by appointment. Transport option available. If you have any questions, feel free to contact us. Kedpfx Aasw I Ic Uensnf Double pallet fork, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windshield, half-cabin, heating, load protection grille, solenoid valve, soot filter, full cabin, exterior mirror, joystick, beacon, windshield wiper, seat heating, LED, seat, air suspension seat.

Condition: used, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung Knodex Avutjpfx Aanjf - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 4,800 mm, loading space width: 2,425 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Internal reference number for customer inquiries: 3-363---- Mercedes Benz Arocs 5 3348 K 6x4 3900mm three-way tipper with Fassi F255A.2.24 xe-dynamic crane IMMEDIATELY AVAILABLE! Mercedes Benz Arocs 5 3348 K 6x4: ENGINE OM471, inline 6-cylinder, 12.8 L, 350 kW (476 HP) * HIGH PERFORMANCE ENGINE BRAKE * SINGLE-PLATE CLUTCH * MERCEDES POWERSHIFT 3 * ABS, SWITCHABLE * SECONDARY OIL RETARDER * M CAB, CLASSICSPACE Kjdpjxnn Ebjfx Aanjnf * ROOF HATCH/VENTILATION FLAP * DIGITAL TACHOGRAPH, 2ND GENERATION, ADR * MULTIMEDIA COCKPIT, INTERACTIVE * LANE KEEPING ASSIST * TRAFFIC SIGN ASSISTANT * ACTIVE BRAKE ASSIST 5 * CRUISE CONTROL Pavic three-way tipper body: * Dimensions 4800x2420x800 mm * Subframe S700MC 6 mm * Side walls: aluminum 60x800 mm * Floor: Hardox 450, 5 mm Crane Fassi F255A.2.24 xe-dynamic: Slewing range 400 degrees * Double linkage system with PROLINK (overextension of knuckle boom up to 15°) * 6-function RCH or RCS radio remote control (linear levers) with display and XP system * FASSI Stability Control FSC incl. LMB11 * Standard color RAL 3020 traffic red, all cylinders black * Load hook * Fassi RCS Maxi radio remote – 6 functions with 3 joysticks * Outrigger operation via radio control Financing/leasing as well as hire purchase/partial amortization leasing available through our leasing partner. Our sales team is happy to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,218 h, load capacity: 3,500 kg, lifting height: 5,380 mm, free lift: 1,690 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, battery capacity: 430 Ah, remaining battery capacity: 94 %, battery voltage: 80 V, battery weight: 2,160 kg, fork carriage width: 1,400 mm, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), rear tire size: Fabrikneu, drive type: Elektro, Equipment: UVV, cabin, lighting, pallet forks, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tire type: Non-Marking Front tire condition: 80 - 100% Rear tire type: Non-Marking Rear tire size: Brand new Rear tire condition: New Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Tested with 94% remaining capacity Battery type: PzS Battery year: 2019 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, road registration, full cab, safety light, non-marking tires, joystick, LED. Ksdpfex Imwrox Aansnf

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft: 6000 kg Max. Reichweite: 21.70 m Aufwärtsneigewinkel: a4 12 ° Abwärtsneigewinkel: a5 110 ° Drehung des Oberwagens: 360 ° Antriebsräder (vorne / hinten): 2 / 2 Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang Typ Abstützung: Abstützung Teleskop Duplex Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig Anzahl Batterien / Batterie: 2 x 12 V 12V Batteriekapazität 120 Ah Anlaufstrom der Batterien (EN)850 A Batterietechnologie Lithium-ion Batteriekapazität 105 Ah Nennspannung der Batterie 624 V Maximale Spannung der Batterie 680 V Batterieenergie 65 kW/h Nennleistung des Elektromotors 107 kW Hydraulische-Motorleistung 84 kW Ladegerät Leistung / Phase / Stromtyp 11 kW / Single-phase or three-phase / AC Getriebetyp elektrisch Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 Max. Fahrgeschwindigkeit 37 km/h Zugkraft 8600 daN Kontinuierliche Zugkraft 4300 daN Parkbremse Automatische negative Parkbremse Festellbremse Ölbad Lamellenbremsen an den Vorder- und Kjdpfx Aaex Ak D Aononf Max. Steigfähigkeit - beladen / unbeladen 36 % / 48 % Kontinuierlich überwindbare Steigung (beladen / unbeladen) 18 % / 23 % Hydraulisch Typ Hydraulikpumpe Zahnradpumpe Hydraulikfördermenge 175 l/min Hydraulikfördermenge – Hydraulikdruck 350 bar Fassungsvermögen des Hydrauliktanks 200 l Geräuschpegel im Fahrerstand (LpA) 65 dB Umgebungsgeräusch (LwA) 103 dB Schwingungsbelastung Hand/Arm < 2.50 m/s² Lenkräder (vorne / hinten) 2 / 2 Steuerungen 2 Joysticks Kabinen-Zertifizierung Kabine ROPS - FOPS Stufe 2 Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference for customer inquiries: 3-198/AVAILABLE IMMEDIATELY ----MAN TGS 26.480 6x4 Three-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 mt) * Hydraulic quadruple extension reach: 12.7 m * E-dynamic hose equipment for 2 auxiliary devices * Slewing range: 400° * Dual linkage system with PROLINK (articulating jib can be overextended up to 15°) * Electronic overload shut-off device with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger, support width: 6.64 m, hydraulically extendable incl. FSC * Outriggers operable by remote control * FL-System (Full Lift) switchable fast operation valve for extensions * LED work lights Vehicle: * MAN diesel engine D2676 LFAI, 352 kW (480 hp) output, 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * Drive configuration: 6x4 * Suspension: leaf/air * Differential locks on driven rear axles Knsdpsxnnzcefx Aanjf * Main wheelbase: 3,600 mm, wheelbase between rear axles: 1,400 mm * Fuel tank capacity: 310 l, AdBlue tank capacity: 60 l * Full brake assistant * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling RINGFEDER type 4040/G150A * Cab type NN: practical (narrow, medium length, standard height) * Mechanical tilting roof * Air-suspended driver's comfort seat, with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl operating panel, 4 functions, operable from outside with door open * Electric sunblind on windshield (interior) * Refrigerator box * MAN SmartSelect infotainment control with touchpad and direct access buttons * MAN Media System Navigation Advanced 7 inch * MAN Sound System Advanced * Navigation map for Europe and Russia * Online traffic information for navigation * Standard driveline extended warranty for the 3rd year of operation up to 450,000 km (see service record for details) Superstructure: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane, mounted directly behind the cab (crane with top equipment: radio remote control, hydraulic stabilizers operable via radio, work spotlights, etc.) Platform body: * Dimensions (L x W x H): 4,800 mm x 2,420 mm x 800 mm * (Alternatively available: Loading length 5,200 mm x 2,420 mm x 800 mm) * Front wall height: 1,000 mm Subframe: The subframe is a robust welded steel construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and the 4 mm floor plate made from Hardox or Naxtra. A 1,000 mm high fixed steel front wall with 2 round lashing eyes in the inner area, each positioned externally at half height. Corner stanchions are fixed with bottom-located locks. Rear and side walls (single pieces over full length) are made from aluminum hollow profiles, side walls are fold-down and swinging with sideboard assist. Tailgate also fold-down and swinging, with central locking integrated into the tipper profile. Floor plate made from Hardox or Naxtra with a thickness of 4 mm, cleanly welded to the tipper profile and the longitudinal and cross members. Press traverse and tipping arms are embedded and reinforced within the longitudinal beams. Lashing eyes (4 per side) are spaced along the outer edge of the tipper floor. Steel structure is made fr

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number for customer inquiries: 1546 / IMMEDIATELY AVAILABLE ----Multiple units in stock! MAN TGX 26.470 construction material platform truck with PALFINGER PK 22002 EH or FASSI F235 loading crane, IMMEDIATELY AVAILABLE! PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - Fast extension system with oil return and internal oil feed-through - Double knuckle with Power Link Plus 15° - Slewing mechanism with swing cylinders Knedpfsxnn Iiox Aanof - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves at the support cylinders - Spiral hose from base frame to main boom - Level indicator at both control stands - Available with 4-stage and 6-stage extension ex stock or Fassi F235 loading crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg or 17.1 m: 740 kg * Slewing range 400° * Double knuckle-boom system with PROLINK (overbending jib up to 15°) * Electronic overload cut-off system with FX500 * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (90% and 100%), including adjustable digital slewing limiter * FASSI stability control FSC including LMB II * Control unit for 2 auxiliary functions with 2 hose guides / e-dynamic * Available with 4-stage and 6-stage extension ex stock Superstructure: * Platform body: dimensions 6,600 x 2,480 x 1,000 mm * Sideboards: each side split once (2 drop-sides), with sideboard relief * Substructure: galvanized lattice frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed platform with crane * Diesel engine MAN 02676 LFAI, 346 kW (470 HP), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automated gearbox with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy efficient * MAN EVBec high performance engine brake, multi-stage * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type leaf/air (BL) * Main wheelbase 4,800 mm, wheelbase between rear and trailing axle 1,350 mm * Fuel tank volume 590 L, AdBlue tank volume 60 L * Trailing axle steerable and liftable * Trailer coupling RINGFEDER type 4040/G150B, 40 mm towing ring * GM cab: the spacious one (wide, long, medium height) * Mattress comfort bed, lower, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment * Glass tilt roof, electric * LED lighting * MAN EasyControl operating panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane departure warning LDW * Driver attention assist MAN AttentionGuard * Emergency brake assist EBA * Standard drivetrain warranty for the 3rd operational year up to 450,000 km, see maintenance certificate for details * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 1693/IMMEDIATELY AVAILABLE ---- MAN TGS 26.400 6x4 three-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic fourfold extension, 12.7 m * e-dynamic hose equipment for 2 additional attachments * Slewing range 400° * Double linkage system with PROLINK (over-bending knuckle boom up to 15°) * Electronic overload protection with FX 500 * FASSI stability control FSC including LMB II * Fassi RCS radio remote control maxi - 6 functions with 3 joysticks (2-2-2) * Special outrigger, support span 6.64 m, hydraulically extendable including FSC * Supports operable via remote control * FL system (Full Lift), selectable fast stroke valve for the extensions * LED work lights Vehicle: * MAN diesel engine, 353 kW (480 hp), 1,800 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * 6x4 drive * Leaf/air suspension * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank volume, 60 l AdBlue tank volume * Full brake assist * MAN EVBec high-performance engine brake, graduated * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling RINGFEDER type 4040/G150A * NN cab: the practical one (narrow, medium-length, standard height) * Mechanical lift roof * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * MAN EasyControl operating panel, 4 functions, operable from outside with door open * Electrically operated sunblind for front window (internal) * Refrigerator box * MAN SmartSelect infotainment control with touchpad and direct entry buttons * MAN Media System Navigation Advanced 7 inch * MAN Sound System Advanced * Navigation map Europe and Russia * Online traffic for navigation function * Standard drive train extended warranty for 3rd year of operation up to 450,000 km, conditions according to maintenance log Knodexnnupopfx Aansf Body: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with premium features: radio remote control, hydraulic outriggers with remote operation, work lights, etc.) Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternatively also available: load area length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Subframe: Subframe as robust steel welded structure, two longitudinal beams with crossmembers supporting the 5-mm thick tipper profile and the 4-mm floor plate made from Hardox or Naxtra. A 1,000-mm high steel front wall, fixed, with 2 lashing rings inside, each positioned towards the edge at mid-height. Fixed corner stanchions with bottom locks. Rear and side walls (one-piece, full length) made from aluminium hollow profiles, side walls foldable and swinging with sideboard lifting assist. Rear flap also foldable and swing-mounted, with central locking integrated in the tipper profile. Floor plate made of Hardox or Naxtra 4 mm thick, precisely welded to the tipper profile and the longitudinal/crossmembers. Press traverse and tipping pivot integrated and reinforced within the longitudinal beams. Lashing eyes (4 per side) arranged along the outer tipper floor. Steel construction in grade St 52-3. All steel parts sandblasted; add-on parts painted or powder-coated in RAL 9016 (pure white).