Used Kappa X for sale (62,105)

Condition: excellent (used), functionality: fully functional, I would be happy to insert the technical data into the document for you. Gear Hobbing Machine WMW MODUL ZFWZ 500 x 5 conventional Country of origin: Germany Technical specifications Details Godpfx Aasy Rh Hyetsbt max. wheel diameter 500 mm gear width 250 mm max. module 5 min. module 12 mm total power requirement 2.2 kW weight of the machine approx. 1920 kg dimensions of the machine approx. 2500 x 1600 x 1900 mm cutter diameter max. 250 - 285 mm clamping table diameter 460 mm table hole 70 mm accessories: various Control unit conventional Additional information Documents

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Gbjdpfx Asztz A Roatet

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20178X00129, Year of construction: 2020, operating hours: 5,861 h, load capacity: 2,400 kg, fuel type: electric, fork carriage width: 560 mm, fork length: 2,390 mm, TECHNICAL DETAILS Load capacity: 2,400 kg Lifting height: 200 mm Fork length: 2,390 mm Fork width: 560 mm MACHINE DETAILS Drive: Electric Gsdpfszxcf Dox Aatebt Battery voltage: 24 V Battery capacity: 465 Ah Battery type: 3 PzS 465 STILL Battery year of manufacture: 2020 Battery compartment length: 715 mm Battery compartment width: 285 mm Battery compartment height: 780 mm Dimensions & Weight Dimensions (L x W x H): 3,550 x 800 x 1,500 mm Shipping weight: 1,224 kg Operating hours: 5,861 h EQUIPMENT CE marking Documentation

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz Gbsdpezlbqrofx Aatjt - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, functionality: fully functional, Equipment: type plate available, SHEARING MACHINE – MARIO RIBOLDI 2500 X 3/4 MODEL: CEM 253 USED MACHINE INTERNAL CODE: SVR 425 Godpfx Aaezbck Tjtebt

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD Gbjdpsy Duy Hsfx Aatst The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Godjyzc Iajpfx Aatsbt Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, operating hours: 3,963 h, For sale: a machine for bending and cutting reinforcing steel. Manufacturer: STEMA/PEDAX Model: Twinmaster 16x+ Year of manufacture: 2007 Operating hours: 3963 Godpfjzpx T Sox Aatsbt The machine has undergone a complete overhaul by a professional service provider. Included with the machine: - Straight bar table (6 meters long) - 2 unwinders Additional unwinders can be purchased – 4 units available – 5,000 euros/unit.

Condition: good (used), Year of construction: 2017, total height: 1,800 mm, total width: 1,100 mm, total length: 2,000 mm, overall weight: 1,000 kg, Equipment: documentation/manual, For Sale: Loma X-ray machine with Loma ejection unit Gbsdezv S Uispfx Aatot Brand: Loma Type: X5 & CV Year of manufacture: 2017 Maximum product width: 45 cm X-ray / radiography It is possible to view this machine on-site. If you have any questions or comments, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2025, functionality: limited functionality, spindle motor power: 60 W, turning length: 9,000 mm, turning diameter over cross slide: 1,400 mm, spindle speed (max.): 160 rpm, turning diameter: 1,600 mm, overall weight: 35,500 kg, rotational speed (max.): 160 rpm, rotational speed (min.): 1 rpm, total width: 2,000 mm, total length: 12,000 mm, working length: 10,000 mm, workpiece weight (max.): 16,000 kg, turning diameter over bed slide: 1,600 mm, power: 60 kW (81.58 HP), warranty duration: 12 months, Machine in like-new condition with CNC, undergoing retrofit. Built originally in 1990, has few working hours due to the factory closure. Fully modernized equipment: electric, electronic, hydraulic, cable, portable chains; new CNC(2025 Edition). Mechanically in like-new condition, fully inspectable. Partially dismantled due to space constraints, partially in operation until installation is completed. Can be inspected at any time, suitable for heavy industrial use. For more technical details, please send request. Price: quote on request. Gbsdpfjygk I Dox Aatot Delivery/installation: transportation options and installation quote available at request. Testing on delivery: available Warranty: 1 year mechanical, electric, hydraulic, 2 year CNC equipment.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 825 mm, controller model: Mazatrol M Plus, table width: 630 mm, table length: 630 mm, overall weight: 19,800 kg, spindle speed (max.): 10,000 rpm, Mazak FH 680 X • X axis 1100 mm • Y axis 800 mm • Z axis 825 mm • Rotary table 360° – 1° indexing • 2 pallets • Table size 630x630 mm • 10,000 rpm, BT 50 Godpfsyan Dijx Aatobt • Through-spindle coolant (IKZ) • Year of manufacture: 1996 • 19,800 kg Can be inspected under power.

Condition: used, Year of construction: 1963, machine/vehicle number: 023-0281, Item No. 21275 Manual Swing Bending Machine Technical data: - max. working width 1030 mm - max. material thickness 2 mm - bending angle approx. 0 - 135° - lockable with end stop - upper beam is operated with a lateral hand crank - max. stroke of upper beam 120 mm - max. adjustment of bending beam 45 mm - bending process is supported by an eccentric weight Gjdpfxjzy Rg Sj Aatebt - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Year of construction: 2016, condition: ready for operation (used), - USED - TEACH-IN LATHE CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1000 mm MAX TURNING DIAMETER OVER BED: 360 mm MAX TURNING DIAMETER OVER CARRIAGE: 335 mm BAR CAPACITY: 42 mm Gbjdpfx Aezqwgasatst BED WIDTH: 250 mm SPINDLE: 4000 rpm; 5,5 kW; CAM LOCK 5" ; 200 mm RAPID FEEDS X-Z: 10 - 10 m/min TAILSTOCK TAPER: CM 3 QUILL DIAMETER: 48 mm QUILL TRAVEL: 140 mm CONTROL UNIT: FANUC Series 21i-T WEIGHT: 1490 Kg OVERALL DIMENSIONS: 2520 x 1170 x 1820 mm ACCESSORIES: STEADY REST ; RS 232 SERIAL PORT NOTE: COROMAT CAPTO TURRET HEAD

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Gbedpfx Aasy Shzaetot Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, operating hours: 500 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 500 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,500 mm, total length: 13,000 mm, total width: 6,000 mm, overall weight: 10,000 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, Here is the English translation: Complete Pegas Gonda Cutting Center with Pegas 540 Horizont X-CNC Band Saw We offer for sale a fully equipped Pegas Gonda cutting center, which has been used as our presentation, testing, and demonstration workplace at our production facility in Slavkov u Brna, Czech Republic. Pegas Gonda is a manufacturer of Pegas band saws and a supplier of complete cutting lines, including material handling systems – from the entry of bars into the saw to the sorting of finished cut pieces after the saw. The offered workplace has been in operation for approximately 3 years. We are offering the line as used equipment because our development continues, and we will be installing the latest version of the system with a new control system. The cutting center is designed for cutting semi-finished materials with a maximum input material length of 6,000 mm. The maximum material cross-section is 500 × 800 mm for straight cuts and 500 × 500 mm for mitre cuts. Gedpfozil Shjx Aatobt The line includes a Pegas 540 Horizont X-CNC band saw with a Siemens S7-1500 control system. At the saw output, there is an integrated conveyor system with a length of approximately 50 m, including a lateral transfer system for finished pieces into 3 buffer zones for subsequent collection of the cut material. Main parameters and equipment: * Complete automated Pegas Gonda cutting center * Pegas 540 Horizont X-CNC band saw * Siemens S7-1500 control system * Input material length up to 6,000 mm * Maximum cross-section for straight cuts: 500 × 800 mm * Maximum cross-section for mitre cuts: 500 × 500 mm * Integrated material handling system * Output conveyor system with a length of approx. 50 m * Lateral transfer of finished pieces * 3 buffer zones for sorting and collection of finished pieces * Used as a demonstration, testing, and presentation center * Location: Slavkov u Brna, Czech Republic The equipment is suitable for companies looking for a complete solution for automated cutting of bar material, including handling and sorting of finished cut pieces after the saw. Inspection of the equipment is possible by prior arrangement at the Pegas Gonda production facility in Slavkov u Brna, Czech Republic. I can further modify it into a more commercial, shorter, or technical version suitable for Machineseeker if needed.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Gbodpfx Aaszzmmwjtjt Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Gbedpfxsz Ac I To Aatet

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system Godpfxoyy Rcps Aatebt 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,790 h, load capacity: 1,000 kg, lifting height: 8,935 mm, fuel type: electric, mast type: duplex, battery manufacturer: HAWKER, battery capacity: 560 Ah, battery voltage: 80 V, DGUV certified until: 03/2027, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), overall weight: 6,820 kg, total height: 4,900 mm, total length: 3,350 mm, Equipment: cabin, full service history, head guard, pallet forks, sideshift, We offer this STILL MX-X reach truck in very good condition, manufactured in 2006. Manufacturer: STILL Model: MX-X TE Year of manufacture: 2006 Max lifting height: 8935 cm Max load capacity: 1000 kg Battery, manufactured in 2015: 80V 560Ah, in very good condition UDT inspection: March 2027 Fork free lift: YES Gbodpsztp Izsfx Aatet If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2021, Vertical panel dividing saw Gedpozuy Dvsfx Aatjbt Manufacturer: Felder Format4 Type: Kappa V80 Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Saw blade diameter: 300 mm Cutting depth: 80 mm Cutting length: 5300 mm Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2016, Technical specifications: Two-column design Cutting capacity: 750 x 500 mm Cutting diameter, round steel: max. 500 mm Cutting diameter, round steel, 45°: max. 500 mm Cutting diameter, round steel, 60°: max. 330 mm Cutting diameter, square steel: max. 480 x 480 mm Cutting diameter, square steel, 45°: max. 480 x 480 mm Cutting diameter, square steel, 60°: max. 330 x 330 mm Cutting diameter, rectangular steel: max. 750 x 500 mm Cutting diameter, rectangular steel, 45°: max. 500 x 480 mm Cutting diameter, rectangular steel, 60°: max. 330 x 480 mm CNC control: CEB Hydraulic bundle clamping Hydraulic lowering Infinitely adjustable saw blade speed Mobile control panel with digital display Saw blade length: 6500 x 41 x 1.3 mm Cutting speed: 20 - 100 m/min Working height: 770 mm Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 6500 x 3500 x 2300 mm Weight: approx. 5.0 tons Accessories: Electric infeed and outfeed conveyor with hydraulic lifting system Condition: Gbedjzbvurepfx Aatjt Nearly new condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: manual, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, foot remote control, Techna – Fab Swing Beam Guillotine Model: QC12Y-6 x 3200mm Year: 2007 Max. Cutting Length: 3200mm Gsdpfxszv Tzks Aatebt Max. Cutting thickness: 6mm Machine with: Power Back Gauge Squaring Arm Front Supports

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Gsdpfszv N Nwjx Aatebt Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Used equipment, sold as is. Individual sale or package sale can be discussed. Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Gjdpfx Aozzvyyjatebt

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 3-meter plate shear from Baykal Gbodpszgt Tbsfx Aatot Type: HGL 3100 x 8 Capacity: 3100 x 8 mm (steel) Electric NC back gauge Year of manufacture: 2006