Used Kasto Kastoradial M6 for sale (117)

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Credpfx Ajwuqbboizsi Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: good (used), functionality: fully functional, Hydraulic hacksaw for Round: 350 mm Saw blade length: 550 mm Power: 2.8 kW 6 stroke rates approx.: 36 / 45 / 58 / 72 / 90 / 116 strokes/min Cutting speed approx.: 11 / 13 / 17 / 22 / 36 / 34 m/min Cutting area flat approx.: 350 x 200 mm Csdpfxez Irqfe Aizori

Condition: used, Year of construction: 1996, cutting diameter / mm saw band length / mm Credpfxozu A Tye Aizsi cutting width / mm Manufacturer: KASTO Type: HBA 360 AU Year of manufacture: 1996 Machine number: 6016 109 181 Weight: approx. 2,600 kg Electrical connection: 400 V Frequency: 50 Hz Power supply: 3~ (three-phase current) Connected load: 10.0 kW Rated current: 35.0 A Maximum cutting range: approx. 360 × 360 mm Maximum round cut: approx. 360 mm Saw band length: approx. 5,334 mm Saw band dimensions: approx. 41 × 1.30 mm (depending on version) Cutting speed: approx. 14–102 m/min Automatic material feed: approx. 600 mm stroke Saw band drive: approx. 5.5–6.0 kW Version: automatic high-performance band saw machine Suitable for sawing round, square, and profile material CE marking present Note: The technical data listed above has been compiled based on the nameplate of the specific machine and available information regarding the KASTO HBA 360 AU. Individual technical specifications may vary depending on the year of manufacture, serial number, and equipment configuration. SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Technical data are on picture. Crjdpfx Ae Aaz A Isizji Parts shown by hand not come.

Condition: used, KASTO PKS130 horizontal semi-automatic bandsaw. Crsdsy E Nkiopfx Aizji

Year of construction: 1995, condition: used, Offered for sale is an automatic horizontal bandsaw with roller conveyor. Control system: Electronic machine control system with display, keyboard and control buttons. Equipped with hydraulic workpiece clamping, material feed system, roller conveyor, safety guards and additional bandsaw blades. Inspection possible by arrangement. Crjdpfx Aijz N Haxezei

Condition: used, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: SSB 260 VA Machine type: Fully automatic band saw Crodjzu Dauepfx Aizoi Design: Hydraulic, automatic feed Cutting range (round): approx. 10–260 mm Cutting range (square): approx. 260 × 260 mm Minimum cut length: approx. 5 mm Automatic feed: approx. 600 mm Multiple feed: up to approx. 5,400 mm (depending on version) Cutting speed: approx. 15–125 m/min, infinitely variable Saw band length: approx. 4,115 mm Saw band width: approx. 38–41 mm (depending on version) Saw band thickness: approx. 1.0–1.3 mm Saw motor: approx. 4.0 kW Total connected load: approx. 6.5 kW Machine weight: approx. 2,000–2,200 kg Dimensions: approx. 2,160 × 2,080 × 2,015 mm (depending on version) SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Csdpfoyqr Utjx Aizeri Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T Crjdpsz I Dhcofx Aizei

Condition: ready for operation (used), Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible. Cjdpfxozrzn Rs Aizori

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Crsdpfxewk D Efe Aizoi Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1998) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 63191010041 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Credpfxezmy S Rj Aizoi Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: excellent (used), Fully hydraulic circular saw machine for workshops and production. The material is clamped using hydraulic clamping cylinders. The control system offers simple machine operation. The angle can be adjusted using a vernier scale with a resolution of 0.1 mm. The saw feed is controlled by a hydraulic cylinder, ensuring maximum cutting accuracy. If you have any further questions or require a different cutting range, please do not hesitate to call. We would be happy to show you the machine and demonstrate its capabilities. Technical data: Band saws KASTO Machine type GKS U Technical data Drive power, saw gearbox 1.6/2.5 kW Cutting speed 14/28 m/min Cutting range, round: 140 mm Cutting range, flat: 160x90 mm Saw feed, hydraulic Hydraulic Saw blade dimensions 425 mm Material support 1050 mm Machine dimensions Length/Width 1250x1205 mm Height 1900 mm Machine weight 980 kg Year of manufacture 1992 Accessories Credpfx Ajzqmh Tjizoi 3000 mm 1x Horizontal clamping cylinder Coolant system Protective hood Pin guide Height adjustment Pressure switch

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Crsdpfx Aioxg Rhvozoi

Condition: used, cutting diameter / mm Cedpfxjzu A Tms Aizeri saw band length / mm cutting width / mm

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t Credpfjv Nq Rtsx Aizsi dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: good (used), Year of construction: 1985, Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 Crodpfx Aiszbhukszoi -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Quantity: 2 hacksaws available -Price: per piece -Machine dimensions: 1300/640/H1115 mm -Weight: 338 kg

Condition: used, Year of construction: 1988, 370 mm rund Cedpfxsupmwro Aizori ja möglich

Condition: used, Year of construction: 1990, cutting diameter 420 mm saw band length 6300 x 41 x 1,3 mm Cjdpfx Aisz Ek A Iozori cutting speed 10 - 130 m/min saw band length 4870 x 27 x 0,9 mm total power requirement 9,0 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,5 x 2,35 x 2,1 m Fully automatic band saw - Control Minipos 807 - with chip conveyor

Condition: excellent (used), Frietsch SAWMILL MACHINERY Buying and selling KASTO sawing machines Dear Sir or Madam, We buy, sell, overhaul, repair, and repaint KASTO sawing machines. We have over 40 years of experience with KASTO sawing machines and have specialized in overhauling these machines. Cedpfjfh Hukjx Aizjri We can also handle KASTO control systems! The machines are overhauled by trained personnel according to KASTO factory standards. We also source KASTO sawing machines according to your specifications for machine overhauls. Excellent price-performance ratio thanks to professional machine overhauls.

Condition: not inspected (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor Cjdpfx Aevf N Sueizeri approx. 450 cm.

Condition: excellent (used), functionality: fully functional, 2. Technical Data Crodpfjyhzi Ssx Aizei KASTOfunctional U Cutting Capacities: Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 300 x 260 mm Cutting range 90° square: 260 x 260 mm Cutting range +45° round: 200 mm Cutting range +45° flat (W x H): 200 x 240 mm Cutting range +45° square: 200 x 200 mm Cutting range +60° round: 165 mm Cutting range +60° flat (W x H): 160 x 120 mm Cutting range +60° square: 150 x 150 mm Cutting range -45° round: 200 mm Cutting range -45° flat (W x H): 200 x 240 mm Cutting range -45° square: 200 x 200 mm Dimensions and Weights: Length: 1,014 mm Width: 1,826 mm Height, upper part lowered: 1,462 mm Height, upper part in highest position: 1,899 mm Material support height: 950 mm Total weight: 510 kg Performance Specifications: Year of manufacture: 2000 Total connected load: 2 kW Saw drive motor: 1.5 kW Cutting speed: 30-75 m/min, infinitely variable Saw blade dimensions: 2910 x 27 x 0.9 mm Saw blade guides: Carbide, replaceable Material clamping: Mechanical Feed: Hydraulic Saw blade tensioning: Mechanical Coolant system: Coolant supplied via 1 coolant nozzle and 1 coolant hose Coolant tank capacity approx. 45 liters Pump flow rate: 16 l/min 3. Machine Description Semi-automatic bandsaw machine with a very robust design for efficient handling of all cut-off and mitre cutting tasks (-45°/+60°) in tubes, profiles and solid materials in workshop applications. The steplessly adjustable feed ensures sensitive and tool-friendly sawing. Universal bandsaw for workshop use in a very robust design for cutting profiles, pipes and solid materials. Machine Base Heavy-duty, torsion-resistant welded construction. Saw Blade Guide The side guide for the saw blade is via mechanically preloaded blade brushes. The blade back is guided by idler rollers. Saw Blade Tensioning Continuously adjustable by ratchet. Mechanically limited tension force. Main Saw Blade Drive Drive power: 1.5 kW, cutting speed 30-75 m/min Material Clamping – Machine Vise Secure material clamping using manually operated horizontal vise. Mitre angle continuously adjustable from 0° – 45° and 0° to +60° using a scale. Indexing bolts at positions -45°, 0°, 45°, and 60° for additional mitre locking. Feed Control Saw feed is steplessly controlled via fine throttle, suitable for universal use on solid and profile materials. Accessories: Coolant system

Condition: used, Year of construction: 1977, cutting diameter 260 mm band length 480 mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Crsdpjyycy Tefx Aizei About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components Credouizlcjpfx Aizsi - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Csdpfoxv Au Tex Aizjri