Used Sawn for sale (60)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Minimum width of the central stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one at the top and one at the bottom Bdjdez H T Ayjpfx Af Aeh Motors Power of the motor for the lower drive 52 kW Power of the motor for the upper drive 41 kW Speed of the spindles 1480 rpm Continuously variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition Bedsr Ak Rgjpfx Af Aodh – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: excellent (used), 3.0 m for load capacities of up to 3 tonnes per metre of rail or 600 kg per roller, roller diameter 125 mm with roller bearings, overall height approx. 140 mm 7.9 m for load capacities up to 1.8 tonnes per metre of rail, support rollers Ø 80 mm running on stainless steel tubes spaced at intervals of just 50 mm, overall height 105 mm 11.1 m for load capacities up to 2 tonnes per metre of rail, cast support rollers Ø 65 mm spaced at intervals of 60 mm, overall height approx. 80 mm Bedpfjyzyf Asx Af Aodh

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Bdodpfx Aew S Eyljf Aeh

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Bedpfxot E Nw Ts Af Ajdh 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: used, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 400 mm, saw blade diameter: 370 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,500 mm, total width: 2,260 mm, total height: 2,000 mm, overall weight: 6,500 kg, table height: 700 mm, Equipment: CE marking, documentation/manual, The Multilama or multi-blade circular saw, model SQUALO 420, is a technologically advanced machine that is easy to use, precise, and extremely reliable. It is an essential tool for a modern sawmill, optimizing the production of sawn timber. Bdsdpfx Afjzzad Nj Ajh It is ideal for producing slats, squares, lumber, profiles, edged boards, prisms, boards, and pallet components.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me. Bedpfxeyz Ia Ij Af Asdh

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Bsdpfx Aswfd Icef Aodh Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Corner cutting Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm If If you have more questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Bjdpfx Ajzwh Hwef Aedh Variable feed speed 15-60M/MIN Operator control station Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: used, Year of construction: 2018, functionality: fully functional, ROUNDWOOD PROCESSING LINE Line supplied by MSK a.s. in 2018, supplemented with a vertical band saw from J. Bögli AG. The line was built in 2018. The band saw is older, but its exact year of manufacture is not known. The band saw can process logs with diameters from 30 cm to 100 cm; the maximum log length is 10 metres. The line itself is designed for a maximum length of 5 metres. When longer logs are sawn, they can be discharged from the band saw via conveyors No. 15 and No. 16. Bdedpfxjzta Ifs Af Ash The cant cross-cut saw has a minimum cutting length of 800 mm and a maximum length of 5 metres. The twin-shaft multi-rip saw has a maximum cutting height of 215 mm and a maximum width of 600 mm. In 2024, the line was supplemented with a Skywood twin-shaft circular saw for processing small-diameter logs from 12 cm to 46 cm. Log length: minimum 2 m, maximum 5 m. The line can operate in parallel (band saw and Skywood) or independently with either one of these machines. Required staffing for line operation: Band saw 1 Skywood 1 Cant cross-cutting 1 Multi-rip saw 2 Cross-cutting, edging and sorting of side boards 2-3 JCB / forklift 1

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW Bedpfxexa Ettj Af Ajdh - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. Bjdpov Hm T Sofx Af Aedh The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: used, Capacity for sawn timber: approx. 1 m³, max. sawn timber length: 5000 mm. Tank capacity: 1925 l Bdjdpfx Afezda D Aj Ash External dimensions: 620 x 100 cm Heated with hot water.

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Bjdpfjxg Ubyex Af Ajdh Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Bedpfx Aeztvzhjf Aedh - Workpiece length: 55–170 mm - Workpiece height: max. 27.5 mm - Workpiece width: max. 28 mm - Milling units: 2 - Cross-cut saw: 1

Year of construction: 1990, condition: used, A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible. Bdjdpfozyq Tfjx Af Ash

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Bodpsyu U Dfofx Af Ajdh Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Bjdpex T Azwofx Af Ajdh Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 14,000 kg, total length: 13,000 mm, year of last overhaul: 2026, saw band length: 9,045 mm, EXCELLENTLY MAINTAINED, FULLY REFURBISHED horizontal band saw WRAVOR WRC 1250 AC High-performance industrial saw with a 55 kW motor — for cutting logs with a diameter of 1250 mm Year of manufacture: 2018 Technical data: • Main motor: 55 kW • Control: fixed control panel with PLC Unitronics V-280 • Option for manual adjustment of cutting thickness • Track (length): 12.5 m • Log clamps: 5 x hydraulic • Hydraulic cylinders: 5 x • Angle supports (90°): 5 x • Standard log turner: 4 x • Mechanical support: 3 x • Pre-cutter: 1 x • Output conveyor belt for transporting sawn timber Bedpfxezd Uifs Af Aodh The images are for illustrative purposes only.

Condition: excellent (used), functionality: fully functional, Stable Linck roller conveyor with 2 discharge options. Total length: 16.30 m. Roller length: 950 mm. Construction height: 1.55 m. Equipped with 6 ejectors for left/right discharge. Includes impact wall, control flap, and electrical switch cabinet with control system. Suitable for model and sawn material. Bdsdpfxoyzr Nto Af Ajh

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Vertical top-drive saw FOD GKT 60 F with feeders and collection Machine in good technical condition after bearing replacement and service. New installation and electrical box Basic technical data: Horizontal clearance mm 600 Saw frame stroke mm approx. 400 Clearance between rollers mm 60-550 Smallest diameter of sawn logs mm 100 Bdjdswp Dqropfx Af Ajh Largest diameter of sawn logs mm 500 Smallest length of sawn logs mm 2200 Main shaft rotation speed rpm 280 Feed per 1 revolution of the main shaft mm/1 rev. 5 - 20 Maximum number of saws pcs. 12 Main motor power kW 30 Feed motor power kW 2.2 Hydraulic unit motor power kW 2.2

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Bdodpfx Aswk D Efjf Ajh Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, Weinig H25 high-speed automatic planing and moulding machine for four-sided planing and profiling of wet timber (freshly sawn) The photographs show the machine’s current condition. Among other things, a number of original new Weinig parts have been fitted, and the tables and stops have been sanded down and recoated. Further new parts are required to complete the machine. These will be ordered upon receipt of an order, taking the customer’s requirements into account. The control panel is for testing purposes only and is temporary. Bodpfxezrxyke Af Aedh Technical data: - Spindles: 5 - Working width: 250 mm - Working height: 160 mm - Spindle 1: Bottom (7.5 kW) - Spindle 2: Right (11 kW) - Spindle 3: Left (11 kW) - Spindle 4: Top (15 kW) - Spindle 5: Bottom (tba) - Hydraulic feed: 15 kW - Powered table rollers: Yes - Table tops: Resanded and recoated (hardened)

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Bjdpszcqzijfx Af Aodh Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm Bdedpoktg Shofx Af Aeh vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional