Used Kasto Kastospeed C 9 for sale (119)

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg Kedpfx Abez N Amjcsdi

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Kjdsu R R Acepfx Abcsdi Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Kodpfx Abekfvhkscsdi Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm Kodpfx Abswpincscedi - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: excellent (used), Frietsch SAW MACHINES Purchase and sale of KASTO sawing machines Dear ladies and gentlemen, Kdodpfx Ajfh Huksbcei we buy and sell, recondition, overhaul and paint KASTO - sawing machines. For more than 40 years we have experience with KASTO - sawing machines and we are specialized in overhauling the machines. The machines are overhauled by skilled personnel according to KASTO factory standards. We are also looking for KASTO sawing machines according to your wishes. for machine overhaul. Good price - performance ratio through professional machine overhaul.

Year of construction: 2012, condition: good (used), functionality: fully functional, Technical specifications Cutting capacity: Panel: 660 x 2560 mm Kdodsv Tzq Ejpfx Abcoi

Condition: used, 1 piece KASTO hacksaw Color: as shown, according to the photos and inspection Condition: used Storage location: Building 2 / Hall 1 Payment method: Advance payment by bank transfer Shipping: Pickup only from location in Regensburg Kdodpfx Absytqbqscji

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Ksdpfxeupvrxe Abcedi Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, tilt adjustment saw blade: 45 °, cutting speed: 100 mm/min, section length (min.): 15 mm, workpiece diameter (max.): 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 04.05.26 and 07.05.26. Kdedpfx Asyr N Nqebcei TECHNICAL DETAILS Maximum workpiece dimensions at 90° miter angle: Round: 280 mm Square: 280 x 280 mm and 360 x 180 mm Maximum workpiece dimensions at 45° miter angle: Round: 180 mm Square: 180 x 180 mm and 260 x 180 mm Minimum sawable diameter: 6 mm Minimum sawable length at 90° cut: 15 mm Cutting speed: 19 - 100 mm/min (continuously adjustable) Saw band dimensions: 3,830 x 25 x 0.9 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 10 A Connected load: 2 kW Dimensions & weight Dimensions (L x W x H): 2,400 x 1,800 x 1,500 mm Machine weight: 500 kg External reference: Lot 79

Condition: excellent (used), KASTO HBA 420AU Bandsaw Gantry type Kdodexxht Hopfx Abcei Automatic Cutting diameter: 420 mm Single material feed: 600 mm Multiple feed: x9 Coolant pump Documentation Weight: 3,400 kg Net Transport possible to any location in the country Feed table Machine in perfect technical condition!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker Kdodpsx Rpdyofx Abcei • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 400 mm, saw band length: 5,700 mm, stepless cutting speed hydraulic material clamping infeed automat chip conveyor coolant device roll conveyor Technische Daten: Schnittbereich rund / cutting range round 400 mm Schnittbereich vierkant /cutting range square 400x400 mm Mehrfachvorschub / multiple infeed 20000 mm Schnittgeschwindigkeit / cutting speed 20-110 m/min. Sägebandlänge / dimensions of the saw band 5700x41x1,3 mm Antriebsleistung / drive capacity 8 kW Gewicht der Maschine ca. / weight 2700 kg Kdedotzkdgepfx Abcoi Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Kdedpfx Abjxpymajcsi

Condition: used, cutting diameter 320 mm saw band length 6300 mm Kdsdpfx Aexb Eduebcji cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Kdjdpfx Abeu Uwygscji Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm Kdodpfx Asifu Aysbcoi motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Ksdpfevzlgasx Abcodi Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: used, cutting diameter 260 mm band length 450 x 40 x 2 mm capacity 60 degrees: square 240 mm 260 x 180 total power requirement 2,0/2,6 kW weight of the machine ca. 1,4 t Kedpsyt R Ikefx Abcsdi dimensions 2,1 x 1,7 x 1,0 m

Condition: used, functionality: fully functional, Metal bandsaw, blade length 430 mm Cutting diameter 210 mm Saw blade length 400 mm Cutting range at 90 degrees: square 190 mm Cutting range at 90 degrees: flat 240 x 190 mm Cutting speed 16/32 m/min Total power requirement 1.1 kW Machine weight approx. 180 kg Dimensions (L x W x H) 1.2 x 0.8 x 0.808 m Kdodpfx Abeyr Aqnecji

Condition: good (used), Year of construction: 2002, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, control type: NC control, actuation type: electric, overall weight: 2,100 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Offered here is a bandsaw from the manufacturer Kasto. The saw is in good condition and can be inspected and tested under power at our facility. For technical data, please refer to the pictures. Kdjdpfx Asyrpkuobcei

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW Ksdpfx Abst Tqlbscedi weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) Kdsdpfewk D Efsx Abcoi No sale to private individuals

Condition: excellent (used), Manufacturer: KASTO, type: SBA 280 AU, year of manufacture: 1998, serial number: 6406162056, weight: 1750 kg, with hydraulic clamp, chip conveyor and operating display, dimensions (width x height x depth): approx. 220x200x220 cm, 3 roller conveyors approx. 100x60cm Kdodpfx Ast Ia Uhobcoi

Condition: used, Year of construction: 2005, cutting diameter 1060 mm Kedpjyqr Utofx Abcjdi saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, 2. Technical Data KASTOfunctional U Cutting Capacities: Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 300 x 260 mm Cutting range 90° square: 260 x 260 mm Cutting range +45° round: 200 mm Cutting range +45° flat (W x H): 200 x 240 mm Cutting range +45° square: 200 x 200 mm Cutting range +60° round: 165 mm Cutting range +60° flat (W x H): 160 x 120 mm Cutting range +60° square: 150 x 150 mm Cutting range -45° round: 200 mm Kodpfx Abeyhzi Secsdi Cutting range -45° flat (W x H): 200 x 240 mm Cutting range -45° square: 200 x 200 mm Dimensions and Weights: Length: 1,014 mm Width: 1,826 mm Height, upper part lowered: 1,462 mm Height, upper part in highest position: 1,899 mm Material support height: 950 mm Total weight: 510 kg Performance Specifications: Year of manufacture: 2000 Total connected load: 2 kW Saw drive motor: 1.5 kW Cutting speed: 30-75 m/min, infinitely variable Saw blade dimensions: 2910 x 27 x 0.9 mm Saw blade guides: Carbide, replaceable Material clamping: Mechanical Feed: Hydraulic Saw blade tensioning: Mechanical Coolant system: Coolant supplied via 1 coolant nozzle and 1 coolant hose Coolant tank capacity approx. 45 liters Pump flow rate: 16 l/min 3. Machine Description Semi-automatic bandsaw machine with a very robust design for efficient handling of all cut-off and mitre cutting tasks (-45°/+60°) in tubes, profiles and solid materials in workshop applications. The steplessly adjustable feed ensures sensitive and tool-friendly sawing. Universal bandsaw for workshop use in a very robust design for cutting profiles, pipes and solid materials. Machine Base Heavy-duty, torsion-resistant welded construction. Saw Blade Guide The side guide for the saw blade is via mechanically preloaded blade brushes. The blade back is guided by idler rollers. Saw Blade Tensioning Continuously adjustable by ratchet. Mechanically limited tension force. Main Saw Blade Drive Drive power: 1.5 kW, cutting speed 30-75 m/min Material Clamping – Machine Vise Secure material clamping using manually operated horizontal vise. Mitre angle continuously adjustable from 0° – 45° and 0° to +60° using a scale. Indexing bolts at positions -45°, 0°, 45°, and 60° for additional mitre locking. Feed Control Saw feed is steplessly controlled via fine throttle, suitable for universal use on solid and profile materials. Accessories: Coolant system