Used Kigo Powder Coating for sale (3,099)

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse Dedpfx Aorhidmsizecp swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Year of construction: 2027, functionality: fully functional, cooling capacity: 12 kW (16.32 HP), High-quality air-to-water heat pump. This unit is characterized by its extremely quiet and efficient operation, and the use of a future-proof, natural refrigerant. • Natural refrigerant R290 (propane): Extremely environmentally friendly with a minimal GWP of 3. Absolutely future-proof and compliant with strict F-gas regulations. • Inverter technology: Equipped with a continuously variable BLDC rotary compressor. The output is flexibly adapted to the actual demand. • High supply temperatures: Effortlessly provides outlet temperatures of up to 70 °C – ideal for heating, cooling, and hygienic hot water preparation. • Robust design: Self-supporting, galvanized steel frame with weather-resistant polyester powder coating (RAL 7037PB) and sound-insulated compressor compartment. • Type: Air-to-water heat pump (outdoor installation) • Cooling capacity (A2): 12.0 kW Djdpfx Aisr D R Thezscp • Refrigerant: R290 (propane, 3.30 kg filling quantity) • Voltage supply: 3 / 400 V / 50 Hz • Dimensions (LxWxH): 2076 x 712 x 1353 mm • Net weight: 387 kg • Hydraulic connection: G 1.1/2" Ordered ex works and precisely tailored to the desired application.

Condition: used, Year of construction: 2004, Offset 5 color with coating Roland 705/3B LV Year: 2004 Number of impressions (mio): 258 Machine control - RCI - RCI JobCard Feeder - Suction feeder table - Anti static device - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - APL but used as PPL Semi Automatic Plate Change - RolandMatic - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - AlcoSmart - Ink temperature control Coating - Number of coating unit(s): 1 - UV coating - Tresu chambered ductor blade system - Drying position possibilities: 3 positions( 1/2, 2/3 and after 5th) - Number of interdeck cassettes/lamps: 2 - UV interdeck dryer - UV dryer in delivery: 3 lamps - IR dryer in delivery: (Eltosch) Dodpov Ewlvefx Aizjcp Delivery - AirGlide - Extended delivery - Powder spray: Grafix Cantronic 3000 - Compressed air compressor, excluded

Condition: new, Year of construction: 2026, CORMAK FAN5500 Material Handling Fan – High-Capacity Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN5500 is a high-performance centrifugal material handling fan engineered for intensive industrial extraction of sawdust, wood chips, dust, and other dry particulate materials. Powered by a 5.5 kW three-phase motor and equipped with a high-efficiency centrifugal impeller, the FAN5500 delivers an impressive airflow of up to 8,000 m³/h, making it an ideal solution for woodworking factories, furniture production facilities, and centralized dust collection systems. Key Advantages Airflow up to 8,000 m³/h – ideal for multi-machine installations and production lines Powerful 5.5 kW motor – ensures reliable performance under continuous heavy-duty operation Large connection ports – Ø300 mm inlet and Ø250 mm outlet for compatibility with various extraction systems Compact yet robust construction – excellent vibration resistance and long service life 400 V three-phase power supply – designed for industrial installations Construction and Technology The FAN5500 features a high-efficiency centrifugal impeller driven directly by a powerful electric motor, minimizing power losses while maximizing airflow. Its heavy-gauge steel housing is powder-coated for superior resistance to corrosion, abrasion, and mechanical damage. The aerodynamic design optimizes air movement while reducing energy consumption. Despite its high performance, the compact footprint allows easy installation where space is limited. Performance and Efficiency The CORMAK FAN5500 efficiently extracts large volumes of sawdust and airborne particles from multiple workstations simultaneously. Maintaining continuous high airflow helps prevent duct blockages, extends the service life of machinery and filtration systems, and significantly improves workplace cleanliness. Effective dust extraction also enhances operator safety by reducing airborne dust concentration and minimizing fire hazards. Applications The FAN5500 is ideally suited for: Woodworking and furniture manufacturing facilities Workshops processing solid wood, MDF, plywood, and engineered wood products Centralized industrial dust collection systems Dedpsvughlefx Aizscp CNC routers, panel saws, spindle moulders, planers, and sanding machines Pneumatic conveying systems for dry wood waste Standard Equipment 5.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller Powder-coated steel housing Ø300 mm inlet connection Ø250 mm outlet connection Heavy-duty support frame Optional Equipment Wear-resistant flexible extraction hoses Cyclone separators Automatic start/stop control systems Extraction arms, adapters, and duct reducers Technical Specifications Parameter Value Maximum Airflow 8,000 m³/h Inlet Diameter 300 mm Outlet Diameter 250 mm Motor Speed 2850 rpm Motor Power 5.5 kW Power Supply 400 V Dimensions (L × W × H) 670 × 600 × 600 mm Weight 55 kg

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose is a 2023 model and has only 813 operating hours. We have completely overhauled the machine, with every component cleaned and functionally tested. Dcedpfx Aiexx Ta Eszop The squeegee, base plate, and collision protection have been sandblasted and newly powder-coated in-house. New rubber lips on the squeegee ensure optimal suction results. The machine is sold with brand-new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a detergent dosing system, which precisely meters the cleaning agent into the cleaning process. For improved illumination of the working path, the machine also features an auxiliary work light that can be switched on as needed. The Kärcher B200 R is ideally suited for medium to large areas such as logistics warehouses, workshops, or underground car parks. Technical specifications: Working width: 90 cm Fresh water tank: 200 liters Suction width: 118 cm Weight: 957 kg

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: Dodpfextbtpex Aizocp M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Dsdpsxhflxofx Aizjcp Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Condition: new, Year of construction: 2026, 10 Ton Railway Rack Jack – Heavy-Duty Mechanical Lifting Solution The 10-ton railway rack jack is a reliable lifting device designed for handling extremely heavy loads. Its robust construction, based on a rack-and-pinion mechanism and a solid crank drive, ensures safe and precise lifting of heavy components. Thanks to its fully mechanical design, the jack does not require electrical or hydraulic power, making it an indispensable solution wherever mobility, independence, and operational reliability are essential. The 10-ton mechanical jack has been designed for applications in heavy industry, railway transport, construction, and technical service operations. It is ideal for railway maintenance works, supporting rail vehicles, lifting steel structures, machine components, and prefabricated elements. Overload-resistant construction The solid body, manufactured from high-strength steel, is protected with a durable powder coating resistant to corrosion and mechanical damage. This allows the 10-ton crank jack to be used both in industrial halls and in demanding outdoor conditions, such as railway tracks, construction sites, and production facilities. The massive base provides excellent stability during operation, while the precisely manufactured rack mechanism ensures smooth movement without jamming. The crank handle operates easily and enables gradual lifting of heavy loads with minimal effort from the operator. Safety and lifting control The jack is equipped with a reliable locking pawl mechanism that effectively prevents accidental lowering of the load. This ensures safe operation when working with heavy components and gives the operator full control over the lifting and lowering process. An additional advantage is the simple mechanical design – the absence of hydraulic and electrical components reduces the risk of failure and lowers operating costs. Regular lubrication and basic maintenance ensure long service life and reliable operation for many years. Advantages of the 10-ton crank jack: ✅ 10,000 kg lifting capacity – suitable for heavy machinery, structures, and vehicles. ✅ Mechanical design – independent of external power sources and ready for use anywhere. ✅ High safety level thanks to the reliable locking mechanism. ✅ Precise height adjustment enables accurate positioning of the load. ✅ High resistance to external conditions – moisture, dust, vibrations, and low temperatures. ✅ Easy transportation – compact dimensions and ergonomic construction. ✅ Wide range of applications across various industries. Technical specifications – MJ10 Parameter Value Model MJ10 Rated lifting capacity 10,000 kg Head width 120 mm Base width 140 mm Overall height 785–1160 mm Foot lifting range 70–450 mm Foot length 80 mm Body thickness 73 mm Base length 175 mm Gearbox height 330 mm Body width 252 mm Gear axis distance 185 mm Support length 230 mm Side housing length 250 mm Net weight 45 kg Djdsxqxwmjpfx Aizjcp

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH CS-2000 is a bolted silo with a capacity of 2000 tons, specially designed for high-capacity cement storage needs. This model offers superior performance in applications such as cement terminals, factories, and fine material storage like limestone powder. Its modular design makes it extremely easy to transport and assemble. All parts used in its production are prepared using laser cutting and precision drilling techniques, resulting in a durable and long-lasting structure. The silo is delivered fully equipped with hardware such as a maintenance platform, filling pipe, internal and external manholes, safety guards, pressure relief valve, air filter, and butterfly valve connection flanges. It also comes ready for use with a cement screw conveyor, level indicators, air flow nozzles, and a manual discharge system. Static load and mechanical analyses are performed using ANSYS Workbench CAE software, ensuring deformation-free operation even at a filling capacity of 2000 tons. Each CS-2000 silo is painted with 1 coat of anticorrosive and 2 coats of epoxy paint, totaling 140 microns in thickness, for maximum corrosion resistance. CS-2000 - 2000-Ton Cement Silo Technical Specifications Silo Capacity: 2000 tons Silo Height: 20,758 mm Silo Width: Ø 12,400 mm Number of Feet: 16 Silo Outlet: Ø 400 mm Silo Weight: 95,000 kg Foot Base Material: 20-25 mm metal sheet Conical Part Material: 10 mm metal sheet Main Body Material: 10-8-6 mm sheet metal Top Cover Material: 6 mm sheet metal Foot Profile: NPL 80 mm steel Ladder: External deck type between base and top cover Railing: Around the top cover Filling Pipe: 4" – extendable to the base foot Why Choose the CS-2000 Cement Silo? Dedpfx Aiexpi Rhjzjcp CONSTMACH CS-2000 provides reliable use for many years with its high storage capacity, superior durability, and engineering precision. Manufactured with individually tested and approved components, this model requires minimal maintenance and delivers stable performance in all climatic conditions. Its bolted modular design also reduces logistics costs thanks to its ease of assembly. At CONSTMACH, we offer our customers not just a product, but a sustainable solution through our quality-standard compliant production process and after-sales technical support. The CS-2000 is the right choice for your high-capacity and secure storage needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Stainless steel powder mixer conical mixer mixer mixing machine Mixing capacity +/- 130 liters Dcjdpewyfu Tjfx Aizep Motor power 3kW 73rpm (recently renewed) Fully mobile Manually operated butterfly valve (food grade) Cover with hatch protection See our other advertisements VMA Wekerom

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Dcsdpfxez Dmnws Aizep Excerpt from the equipment. Complete equipment available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from

Condition: used, mileage: 17,435 km, power: 478 kW (649.90 HP), first registration: 02/2022, fuel type: gasoline, next inspection (TÜV): 03/2028, color: grey, gearing type: automatic, emission class: euro6, number of seats: 4, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, * German vehicle, first owner from our own stock, VAT can be shown separately. * Approved warranty, top condition, garage-kept, summer car, not used on race tracks. * Chalk * Black leather interior, chalk-colored contrast stitching * LED door projectors PORSCHE * Inserts for rear lid, chalk color * Power steering plus * Front axle lift system * Darkened LED matrix headlights including PDLS system * Design rear lights * Park assistant including surround view * Lane change assistant * Adaptive cruise control * Garage door opener * Comfort access * Light design package * Front seat ventilation * Leather steering wheel * Sports seat Plus with leather backrest * Multifunction GT sports steering wheel in Race Tex with carbon trim * Carbon door entry sills (matte) * Burmester high-end surround sound system * Wheels, matte black powder-coated * Transparent paint protection film in the front area * All trim elements (front apron, rear spoiler) wrapped in matte black * Sports exhaust system with valve control (deeper sound) with EC operating permit from Friedrich Motorsport; original exhaust system can be included * Fuel cap with Walter Röhrl’s original signature * I will gladly send you the complete technical description and a video via WhatsApp * Special equipment: Storage compartment package, illuminated door entry sills (carbon), door entry light with LED projector and Porsche lettering, Driving Assistance System: Park assistant front and rear including reversing camera and surround view, Driving Assistance System: Porsche InnoDrive including adaptive cruise control, Driving Assistance System: Lane change assistant, Windshield with top band filter, Vehicle without model designation, Rear lights Exclusive Design, Home-Link (garage door opener), Interior: Full leather, different color, Interior lighting package / Light design package, Ionizer for air purification, Comfort access (keyless door unlocking), Louvered air intake in the rear lid, painted, Leather package 930, Steering column cover in leather, Front axle lift system, Light alloy wheels front/rear: 9x20 / 11.5x21 (911 Turbo S wheel), Matrix-LED headlights, darkened, including Porsche Dynamic Light System Plus (PDLS+), Porsche lettering painted, Power steering Plus (speed-dependent), Front seat ventilation, Sound system Burmester high-end surround, Sports seats Plus - backrests in leather, Interior trim in leather Further equipment: Adaptive sports seats including 18-way seat adjustment and memory package, Airbag driver/passenger side, Drive type: All-wheel drive, Exterior mirror, aspherical, left, Exterior mirror electrically foldable, Exterior mirror electrically adjustable and heated, both, Indicator lights LED, Cabriolet, Connect Plus (Bluetooth, Apple CarPlay, WLAN, vehicle tracking system), Headliner Race-Tex, Headliner fabric, Anti-theft system with interior monitoring, Rev counter, Automatic headlight activation, Driving Assistance System: Hill-start assistant, Driving Assistance System: Collision warning system with braking intervention and pedestrian recognition, Driving Assistance System: Porsche Dynamic Chassis Control (PDCC), Floor mats, Gearbox 8-speed - dual-clutch gearbox (PDK), Cup holders, Rear lights LED, Rear window heater, Rear spoiler, Interior filter: Activated carbon filter (odor filter), Interior package: Carbon, Isofix mounts for child seat on front passenger seat, Body: 2-door, Ceramic brake system (Porsche Ceramic Composite Brake, PCCB), Keyless Drive, Cloth Dsdpozc Ar Hsfx Aizjcp

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel coupling with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet). Superstructure: Crane Interchange System: The superstructure, including the crane, can be removed, and a fifth wheel coupling is mounted on the chassis in its place. The function of crane and superstructure, including the fifth wheel coupling, is also possible. The vehicle has a total of two fifth wheel couplings, each of which can be moved longitudinally. A crawler unit would also be available; the net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front. ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color). ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable lashing bars. ? Standard platform floor with welded 4 mm steel diamond plate, painted in RAL (chassis color). ? 6 recessed lashing points, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 x lashing points for chains, 6500 daN (2 at the front and 2 at the rear of the superstructure). ? Sturdy end wall consisting of a welded frame, welded 4 mm steel sheet, and 5 accessory hooks. End wall height approx. 1300 mm, steel construction, painted, with 2 folding eyelets for lashing straps, welded on. ? Cladding panels, fenders made of aluminum diamond plate (sandblasted, powder-coated and painted). ? Multifix lashing bar pockets, 2 rows, with a distance of approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers, and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27, endlessly rotating, completely assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydr. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out according to the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual, and crane test book. Lighting: Dcodpfx Aijy E A Saozep ? 2 x LED AS integrated into the end wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED lights under the superstructure at the rear, on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED strip lights, 1 on each support leg. Further information is available upon request.

Condition: used, Year of construction: 2026, functionality: fully functional, CORMAK FM350 Dust Collector – Industrial Sawdust and Chip Extraction System The CORMAK FM350 is an industrial-grade dust extraction system designed for efficient and reliable removal of sawdust, chips, and fine particles in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four woodworking machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key advantages Powerful 3.8 kW motor (400 V) – ensures reliable continuous operation in industrial conditions. High airflow capacity of 4,860 m³/h – efficiently removes large volumes of sawdust and wood chips. Heavy-duty metal centrifugal fan – durable steel impeller provides quiet, vibration-free operation. Robust steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise positioning even on uneven floors. Six 200 L collection bags – large waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps enable tool-free and fast bag removal. Connection for up to four machines – suction manifold with 1 × Ø180 mm and 4 × Ø100 mm outlets provides flexible installation options. Construction and technology The CORMAK FM350 is equipped with a durable steel centrifugal fan and a reinforced support structure designed for intensive industrial operation. High-quality components ensure resistance to overloads and long-term reliability. The modern bag mounting system allows quick maintenance and convenient replacement of filtration and collection bags. Precision and performance Thanks to large-surface fabric filter bags and high suction pressure, the CORMAK FM350 dust extractor provides excellent working conditions even during heavy-duty woodworking operations. Effective dust removal improves air quality, increases operator comfort, and contributes to a safer production environment. Applications The CORMAK FM350 is designed for: wood processing plants – extraction from saws, planers, routers, and other woodworking machines professional carpentry workshops requiring multi-machine extraction technical schools and training facilities large industrial halls requiring a high-capacity sawdust extraction system Standard equipment 3 fabric filter bags 3 fabric collection bags Suction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional equipment Galvanized hose clamps 3-micron filter cartridge Technical specifications Parameter Value Extraction capacity 4,860 m³/h Collection bag volume 3 × 200 L Number of bags 6 Suction connections 1 × Ø180 mm, 4 × Ø100 mm Dimensions (L × W × H) 2355 × 590 × 2150 mm Weight 125 kg Motor power 3.8 kW Power supply 400 V / 3-phase Dcsds Afnk Njpfx Aizsp PLEASE NOTE!!!! This machine is a returned item; it comes without its original packaging or splitter. NO WARRANTY AND NO RETURNS!

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300S Dust Extractor with Dust Filters The CORMAK FM300S dust extractor with dust filters is a professional machine designed for the efficient removal of chips, sawdust, and fine dust generated during wood processing. Thanks to its dual filtration system, powerful three-phase motor, and well-designed construction, the FM300S woodworking dust extractor is an ideal solution for both medium-sized and larger production workshops. Main Advantages of the Machine High extraction capacity – 3,900 m³/h – effective operation even with large amounts of contaminants Dust filters included – ensure efficient particle separation and cleaner air 2.2 kW three-phase motor – guarantees continuous and reliable operation Balanced metal impeller – reduces vibration and noise Mobile construction with 4 castor wheels – easy to move even in confined spaces Quick bag fastening system – convenient and fast maintenance 1 x 150 / 3 x 100 mm extraction outlets – enables simultaneous operation with several machines Construction and Technology The FM300S dust extractor is built on a stable steel frame, powder-coated for improved resistance to industrial conditions. The machine is equipped with a WhirlWind series metal impeller, which provides efficient suction while maintaining a low noise level. The large extraction outlet allows the machine to operate with up to three processing stations simultaneously, significantly increasing the productivity of the workshop. Precision and Operating Efficiency The advanced extraction system combines high negative pressure with efficient filtration of fine particles through integrated dust filters. As a result, the CORMAK FM300S sawdust extractor not only helps keep the work area clean but also contributes to operator health and the reliable operation of woodworking machinery. Applications The FM300S is designed for professional users who require continuous operation with saws, milling machines, planers, and other equipment generating significant amounts of sawdust and wood chips. The dust extractor is ideally suited for: woodworking workshops, Dedpfx Asz A T Hqjizscp furniture manufacturing plants, craft workshops, local dust extraction systems in production lines. Standard Equipment mobile metal base with castor wheels, 2 fabric waste collection bags, 2 dust filters (main filters), Y-shaped extraction connector. Optional Equipment 100 mm extraction hose, galvanized clamps, filter cartridges with filtration efficiency down to 2 microns. Technical Specifications Specification Value Extraction capacity [m³/h] 3,900 Negative pressure 1,750 Pa Noise level 75 dB Bag capacity [l] 150 Number of bags 2 (waste collection) Diameter of extraction outlets [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1,400 x 570 x 1,960 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 747 kg, maximum load weight: 1,953 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper + Enclosed Leaf Grid 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 66cm Total weight: 2700Kg Payload: 2073Kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning closure Can be folded down and removed on all sides Enclosed leaf grid 60cm made of hot-dip galvanized steel Also can be opened and removed on 4 sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C-tire with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED marker lights at the front Lights at the rear with reversing light and triangular reflector Upper frame mounted on rubber pads Large tilting angle of 51 degrees rearwards Hand pump with adjustable handle OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Integrated ramp rails 2800Kg -Electric tilting operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also enclosed -Extension side boards 30cm with tensioning closure -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available upon request! Plus shipping to Gera and vehicle registration document 200 € net. Pictures are examples and may show optional accessories that incur extra costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Djdpfx Ajz A T Uheizecp In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 Dust Extractor with Dust Filter The CORMAK FM230 with a dust filter is a compact, mobile, professional-grade dust extractor designed for the efficient removal of wood chips, dust, and sawdust in woodworking workshops. Thanks to the use of a dust filter, the machine provides not only high suction performance but also improved filtration efficiency, significantly enhancing air quality in the workplace. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ideal for use with low- and medium-powered woodworking machines. Dust filter – effectively captures small particles, including fine sanding dust. 0.75 kW / 230 V motor – quiet, energy-efficient operation without the need for a three-phase power connection. Mobility – four castor wheels allow the extractor to be easily moved around the workshop. Compact design – the machine takes up little space, making it an ideal choice for small workshops. Construction and Technology The machine is equipped with a metal sawdust fan, ensuring a long service life and reliable operation. The high-quality dust filter efficiently separates dust particles from the airflow, helping to reduce airborne dust in the workshop. The robust powder-coated housing protects the internal mechanisms, while the sealed suction system prevents pressure losses. Precision and Operating Efficiency The CORMAK FM230 woodworking dust extractor provides stable and consistent suction. An extraction capacity of 1,000 m³/h combined with a low-power motor enables efficient operation with a single woodworking machine without interrupting the work process. Thanks to its fine-particle filter, it is also an excellent dust extractor for fine dust generated during wood sanding. Applications Small and medium-sized woodworking workshops Craft and production facilities Technical schools and educational workshops Hobby woodworking workshops The FM230 is ideally suited for use with: milling machines, planers, jointers, belt sanders, thickness planers. Standard Equipment Dust filter Waste collection bag Dedpfx Aez A Ut Eeizecp Castor wheels with brakes Bag fastening clamp Optional Equipment Ø100 mm extraction hose Suction outlet reducers Additional set of filter bags Technical Specifications Specification Value Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Negative pressure 1,800 Pa Noise level 70 dB Negative pressure 1,020 Pa Noise level 70 dB Bag capacity 60 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Dimensions (H x W x L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Dcedpfjz A Hh Uex Aizjp

Condition: new, empty load weight: 4,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 131 mm, Equipment: ABS, Frame Central axle steel frame welded construction in lightweight design, optimized for weight, with tipping outriggers and rear tipping shaft; Hitching Dcsdpoz R Sx Rofx Aizjp Tow bar, bent, with height-adjustable heavy-duty screw hitch eye 50 mm Supporting system 1 piece of mechanical support jack with crank on the left side in the direction of travel, 1 piece of step bracket screwed on Axles SAF Intradrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, reinforced axle housings, off-road design, automatic brake linkage adjuster Wheels 4 steel rims 11.75 x 22.5, silver Braking system/suspension Two-line compressed air braking system Braking system manufacturer according to factory choice EBS system 2S2M, 2nd axle sensed RSS/RSP stability program Spring brake parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines laid under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Tipper body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 on the outside of the front wall Fine-grained special steel floor sheet 5 mm 5 pairs of high-swiveling lashing rings 5 t 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended pivot pin locks and spring-assisted lifting mechanism, as well as additionally pivoting Side walls left and right with manual central locking 2 rear corner posts at sideboard height, mounted permanently on the side Steel rear wall 4 mm (HB400), approx. 980 mm high, pivoting with recessed mounting, hooks for metering chains on the rear wall and underside of the body Rear wall lock = automatic pneumatic lock With sealing strips Tarpaulin Plastic roll tarpaulin incl. aluminum tube and hand crank, without customs lock, in the direction of travel on the right horizontal tarpaulin bar rope fastening, tarpaulin overhang approx. 200 mm, front and rear zigzag fastening, tarpaulin overhang approx. 400 mm, stop bracket and locking device for rolled-up roll tarpaulin in the direction of travel on the right, Bracket for hand crank Tarpaulin fastening in the direction of travel on the left with 2 tension straps with rubber pads and tension latches on the underside of the body Tarpaulin color similar to RAL 9006 white aluminum Lighting/electrical system 24-volt lighting system according to ECE regulation R48 2 full-LED multi-chamber taillights "Aspöck" 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled via the turn signal 1 fixed electrical connection cable with 15-pin plug Painting Steel granulate cleaning, multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane topcoat Chassis = RAL 7021 black gray Tipper body incl. front wall = RAL 7021 black gray Side walls = RAL 7001 silver gray Rear corner posts = RAL 7021 black gray Rear wall = RAL 7021 black gray Wheel hubs black = powder-coated Support feet black = powder-coated Lateral underrun protection = factory choice Plastic parts black, unpainted Accessories/General 2 pairs of plastic single-wheel mudguards, with splash protection Fixed aluminum trapezoidal underrun guard, unpainted 2 wheel chocks, with bracket Noise damper = rubber pads Errors and omissions excepted.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 630 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank Dodpszw Aafefx Aizecp - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - Speed limiter - Catalytic converter - Automatic climate control - LED lighting - Air suspension - Air-sprung seats - Particle filter - Radio/Multimedia system - Disc brakes - Sun visor - Lane keeping assist - Windshield - Additional steering axle Internal number for customer inquiries: 6-067 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 Mercedes-Benz Actros 2648 L 6x2 Air suspension Front + Air suspension rear !!! as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235 or F255, each with 4 or 6 extensions Vehicle: SECONDARY OIL RETARDER HIGH PERFORMANCE ENGINE BRAKE ENGINE OM471, R6, 12.8 L, 350 KW (476 hp), 2300 NM ENGINE DESIGN EURO VI, E TRANSMISSION G 281-12/14.93-1.0 (12-speed automatic) SIDE PTO, SINGLE 385/65 R 22.5 315/80 R 22.5 TANK 630 L ADBLUE TANK 75 L, TOW HITCH, STANDARD, D50, VBG (40mm would also be possible, would be exchanged) DISC BRAKE, ON FRONT AND REAR AXLE M-CAB CLASSICSPACE, 2.30 M DRIVER'S AIR-SPRUNG SEAT, COMFORT LEATHER STEERING WHEEL REARVIEW CAMERA, TOWING VEHICLE END MULTIMEDIA COCKPIT INTERACTIVE 2 WITH NAVIGATION SYSTEM AIR CONDITIONING SYSTEM LED HEADLIGHTS, LED TAIL LIGHTS, LED TURN SIGNALS, FOG LIGHTS LED CRUISE CONTROL Packages: SIGHT PACKAGE, WITH LED HEADLIGHTS COMFORT PACKAGE, FOR S/M-CAB SAFETY PACKAGE, WITHOUT ROLL STABILITY CONTROL SMOKER PACKAGE VEHICLE DESIGN ACCORDING TO GSR, PHASE C MERCEDES-BENZ ONROADSERVICE ATS WARRANTY ACCORDING TO TERMS AND CONDITIONS, 3 YEARS/450,000 KM ATS WARRANTY ACCORDING TO TERMS AND CONDITIONS, 4TH YEAR/600,000 KM Superstructure: Dump body: Dimensions 6.600 x 2.480 x 1.000 mm Side walls 1x split (2 flaps) per side, with side wall relief Substructure: Steel construction, KTL + powder coated and/or hot-dip galvanized Hole frame for good load securing Center lashing rail Toolbox Support leg plates including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m is still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extendable boom up to 15°) Electronic overload protection system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) including adjustable digital slewing limit FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose connections / e-dynamic with 4-fold and 6-fold extension in stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK LOADING CRANE -Lifting moment: 205.0 kNm (20.9mt) -Classification HC1 HD4/B3 according to EN12999 -Fast-acting extension system with oil return and internal oil routing -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS control unit (for two pressure ranges) -Individual support leg control with lockable check valves on the support cylinders -Spiral hose from the base to the main arm - with 4-fold and 6-fold extension in stock Price: From €219,990.00 net, depending on crane type and design. Individual financing is available with one of our...

Year of construction: 2008, condition: good (used), Anko BFK-10 Automatic stir fryer Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph Dcjdjh N Slxepfx Aizsp

Condition: new, Feed unit with variable speed control MAGGI Model vario steff 4 Offer type: New machine Availability: Immediate Patented "Feeder Grip 363" rubber feed rollers ensure a consistent feed of the workpiece to the tool. Feed roller suspension with 20 mm of spring travel allows for the processing of workpieces with varying thicknesses without additional setup operations. Powerful electric motor prevents the workpiece from stopping during processing. Easy speed adjustment via a rotary control on the unit. Right and left rotation can be easily selected using a rotary switch. High-quality powder coating on all metal components. Safety brushes in front of the first and after the last feed roller for added safety. Technical data: Diameter of the feed rollers: 120 mm Width of the feed rollers: 60 mm "Feeder Grip 363" roller hardness: 50 Sh Motor power: 0.75 kW, 400 V 50 Hz Motor speed: 1,400 rpm Feed speed: 3 - 18 m/min, variable (optional up to 38 m/min) Weight: 37 kg Stand MAGGI Model Standard 1050 Offer type: New machine Availability: Immediate Standard stand made of gray cast iron and ground guide tubes. Swivel joint for horizontal and vertical use of the feed unit. Technical data: Diameter of the vertical support tube: 58 mm Length of the vertical support tube: 540 mm Length of the horizontal cantilever tube: 1050 mm Weight approx.: 38 kg OTHER MODELS AND EQUIPMENT AVAILABLE UPON REQUEST Note on used machines: • Errors and omissions in technical data and subject to prior sale. • The stated prices are ex-works prices - free for loading! • The machines have been cleaned and functionally tested. • All machines are sold as is, as viewed, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. Dodpfjh Dikwox Aizscp (We only answer inquiries if you provide your address and telephone number!)

Condition: good (used), Code: 0442 Brand: VALTORTA Model: FV/TR Roller coater machine REVERS for rollcoating of basecoats and U.V. top coats Conveyor feed system with auto-centering system to keep the belt in track Working width mm 1300 Working table height from the floor mm 900 Working thickness mm 1/180 1 Rubber covered spreading roll diameter mm 240 1 Steel dosing roll unit n° 1 diameter mm 165 1 Rubber covered spreading roll REVERS unit diameter mm 240 1 Steel dosing roll REVERS unit diameter mm 165 Rubber covered conveyor rolls diameter mm 190 Rubber covered conveyor rolls diameter mm 60 Rubber covered roll motor power Hp 2 Steel roll motor power Hp 1 Rubber covered roll REVERS unit motor power Hp 2 Dcodpfx Aeu T Hbwsizsp Steel roll REVERS unit motor power Hp 1 Doctor blade REVERS unit motor power Hp 0,5 Feed speed mt/min 6/30 Independent electrical cabinet with easy commands Machine installed on wheels and rails Overall dimensions mm 2700 x 2000 x 1550 h Weight kg 2700

Condition: good (used), Year of construction: 2008, roll diameter: 50 mm, roll width: 310 mm, construction width: 1,290 mm, type of input current: three-phase, Roller track curve KNAPP, driven roller row 180°reversing track/ct1018 Manufacturer: KNAPP Track width: 315mm / total width: 385 mm Roller width: 310mm Inner curve length: 1250 mm Dodpsfxgp Hsfx Aizecp Outer curve length: 2300 mm Inner track distance: 590 mm Total diameter: 1290 mm Roller material: Steel Roller diameter 50 mm Bearing steel rollers Powder-coated, perforated steel frame SEW Eurodrive drive. Power: 0.25kW, speed: 39m/min Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, maximum load weight: 2,894 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 406 184 3500 2 NEW VEHICLE Internal dimensions: 406cm x 184cm Side wall height: 35cm Loading platform height: 68cm Total weight: 3500Kg Payload: 2894Kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO Largest possible axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side walls with tensioning fastener Foldable and removable on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic support wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg lashing force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED marker lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING IN FEBRUARY 2026 Dcsdpfxsghpbke Aizjp -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side walls (price reduction) -Black Edition (Powder-coated side walls and rims in black) -Integrated loading ramps 2800Kg -Steel plate on base plate -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf guard at various heights, also closed -Extension side walls 30cm with tensioning fastener -Flat cover with or without bows -High cover 180cm or 200cm -Rope winch AL-KO 12.5m Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net Images are for illustrative purposes and may show optional accessories that incur extra costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist for axle repairs, including for caravan trailers. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.