Coating line for small profiles

PMH GmbH EX30-28

Year of construction: 2023, condition: excellent (used), RIETSTACK IRS modular equipment - IRS 430 Maximum web width - 420mm Maximum mechanical speed - 200m/min Electric power 3x400V 50 Hz (5P-32A) Compressed air 6 bar Module unwind unit equipped with: Pneumatic unwind spindle - 76mm Maximum unwind diameter - 800mm Micro-processor control system Electronic counter (labels/meters) Podpfexc Ivpox Aa Degg Splice table with 2 pneumatic clamps Precise adjustment of rewind and unwind web tension Electronic correction of web tension on unwind Flag detector Automatic stop at roll end De-curl-bar-unit Web guide BST Splice table with 2 pneumatic clamps Module for die cutting station Modified to work with BOBST M5 magnetic cylinder Die cutting station standard (including matrix rewinder) Maximum working width of magnetic cylinder - 420mm Magnetic cylinder repeat size - 96T-220T Magnetic cylinder one included - 96T Die-cutting unit driven by servo drive Nip roller servo driven Matrix rewind spindle is driven by servo Matrix rewind spindle-diameter - 76mm Maximum rewind diameter-matrix - 600mm Matrix pneumatic pressure roller Hydraulic pressure read out 2 clocks Modified pressure bridge allowing to lift the magnetic die cylinder without hoist to mount the magnetic die plate. Matrix pneumatic pressure roller Nonstop stacker running max. 4 streams Delivery conveyor servo driven with vacuum belts and vacuum pump Simco antistatic bar: 3 pcs Max. width 420 mm Max. stack length 630 mm Max. stack height 120 mm Max. stack speed 80 m/min Stack height control by counting the sheets in the stack Speed dependable on material Stacks delivery by pushout system Stacker running full automatic continuous running mode Min size for ready stacks production is 50x50mm Smaller labels can be collected at the end of the conveyor Electric power 3x400V 50Hz (5P-16A) Compressed air 6 bar Control panels with HMI touch screen panels

Year of construction: 1998, condition: like new (used), VAN DAM 568 COM III 8 COLOUR CUP PRINTER 560 COM III 8 COLOUR CUP PRINTER, the machine is in good condition. The specifications are listed down below. Machine Type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition Podpfxeh Ha I Eo Aa Degg If you have any questions about the machine or it's specifications you can always contact us.

Year of construction: 2021, condition: new, OSTAS PLATE ROLLER TYPE 4R OHS 1570 X 200 - 4 Rolls - Capacity 1570 x 9 - Hardened rollers - Diameter above roll 200 mm - Diameter under roller 200 mm - Diameter side roll 180 mm - Hydraulic system Podpjgg N R Hsfx Aa Dsgg - Digital display for movement left roller - Digital display for movement middle under roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roll positioning - Hydraulic up and down movement system with middle and side rolls - Hydraulic balancing system - Overload protection - Documentation - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: excellent (used), Year of construction: 2008, Offer for Gearless Flexo UTECO ONYX 876 with 8 colors, year 2007, and 1200 mm width. Fully equipped, can be seen in operation here in Europe. Pgsdpsxf Nynjfx Aa Dsg

Condition: used, fuel type: diesel, axle configuration: 8x2, emission class: euro6, Equipment: ABS, differential lock, Vehicle available for immediate delivery. DAF CF 460 8x2 - Euro 6 - flatbed with ramps: - First registration: 2015; - 460 HP engine - Euro 6; - automatic transmission; - hydraulic retarder; - four axles 8x2; - rear air suspension; - low-profile tires 315/70 R 22.5; - GVW: 32,000 kg; - payload: approx. 18,800 kg; Accessories: - differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, air-suspended driver's seat, sun visor, fog lights, cruise control, sunroof, central locking. Setup: vehicle transporter with ramps: - fixed flatbed approx. 7.40 m with 40 cm aluminum side boards and double-acting hydraulic rear ramps. - Other vehicles available: 2, 3, or 4 axles, equipped with flatbed and ramps from 6.50 m to 9.40 m, or chassis vehicles with customizable setup. The vehicle is available for viewing and test drive at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 0457950955. Please contact us to schedule an appointment in order to organize company visits efficiently. For further information, technical details, and sale price, please contact our sales representatives directly at +39 0457950955. Note: The vehicle description is intended as indicative and may contain errors or inaccuracies. Prospective buyers are advised to verify the exact specifications before purchase. Psl Autocarri Srl declines any responsibility for errors or discrepancies contained in this description. Pgodpfx Aaowbvb Hj Dsg NOTE: WE WILL ONLY RESPOND TO INFORMATION REQUESTS CONTAINING THE APPLICANT'S NAME AND TELEPHONE NUMBER.

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers Pgsdpfx Aaju D Amgs Djg - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Pgjdpfx Aot Tcz Usa Dog

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Psdpsiq Hxkjfx Aa Dsgg Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Pgodpfx Aaoipvhnj Dog

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 Pgsdpfxohigmbj Aa Dsg passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.